Rotary table

BÜCHE RTW 30

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Ijdpfx Asrtd Uweh Uotr Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: new, For grinding HSS and carbide engraving cutters, as well as cutters with one or more lips in different shapes, such as radius cutters or negative taper angle of cutters. The universal index head is provided at 24 positions so that any particular shape angle can be obtained, a free rotation of 360° or 10° is allowed for grinding finger milling cutters, rotary drill, lathe. Tool, only replace the attachment to the index head without complicated assembly. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding disc ×1 Spiral drill grinding attachment ×1 End mill grinding attachment ×1 Rotary tool grinding attachment ×1 Itedpfx Aoq E Ry Hjh Ujr Option collets: Ø3,Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. capacity of collet Ø3 - Ø18mm Max. grinding diameter Ø18mm Conical angle 0~180 ° Relief angle 0~45 ° Negative angle 0~25 ° Speed 5300 o/min Grinding disc Ø100 x 50 x Ø20mm Motor 375W Dimensions 550 x 460 x 490 mm Weight 51 kg

Condition: good (used), functionality: fully functional, Max. pressing length approx. 2,750 mm Max. gluing width approx. 1,750 mm Ijdpfx Aheww Awgs Uetr 10 freely movable support arms, each with a hydraulic press cylinder and one grid-adjustable counter bearing Press cylinders can be freely positioned on the support arms Support arms suspended from above, allowing for quick relocation from one side to the other Dimensions of press cylinder block: 115 x 50 mm Dimensions of counter bearing: 115 x 50 mm Max. cylinder stroke approx. 30 mm Gluing rack movable on rollers Installation dimensions (LxWxH): 3.1 x 1.0 x 2.25 m Press cylinders have been pressure-tested in stock.

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm Itjdok Egrpspfx Ah Usr centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm Itodpfxjnzpx Ro Ah Uer -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: used, Year of construction: 1988, Control Grundig x-travel 700 mm y-travel 500 mm z-travel 400 mm weight of the machine ca. 2,8 t Iedjiqu S Eepfx Ah Uetr +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Itedjb Ez R Uopfx Ah Ujr Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg

Condition: like new (used), turning diameter: 1,500 mm, MAXIMUM WORK DIAMETER : 1600 mm. MAXIMUM WORKING LENGTH : 3000 mm. DIAMETER OF LANTERN SHAFT : 83 mm. OUR MACHINE IS ACTIVE WITHOUT ANY PROBLEMS Itjdsr Ui R Nspfx Ah Uor ALL REVOLUTIONS AND AUTOMATICS ARE IN VERY GOOD CONDITION

Year of construction: 1977, condition: used, Surface grinding machine Fabr.Okamoto Type:PSG - 63 UA Bj.1977 Itjdpfx Ahsiz Tmkj Usr Magnet 600 mm X 300 mm. Grinding dimensions : longitudinal 630 mm transverse: 310 mm height : 350 mm Ready for use .

Condition: used, Year of construction: 1956, machine/vehicle number: 17179, Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe Iedpfx Ahjh Uuzyo Uetr -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg