Accessories and spare parts
424
Butt welders
36
Embossment welding machines
15
Flame-Cutting machines
57
Laser cutting machines
104
Other
229
Plasma cutting machines
193
Plasma cutting tools
48
Plate edge welding slanting machines
20
Robots
57
Spot welding machines
182
Water-jet cutting equipment and machines
39
Welding sets
666
Welding smoke suction
99
welding bench
420
Welding & cutting Offers
Serial No. 9117
Control Weldstar 2000
Uia0r08
Capacity 28kva
Input 415
Throat 600mm
Fitted with Water cooled tips
Length 1200mm
Width 600mm
Nett weight actual. 150 Kgs.
Dimensions
Length
500 mm
Width
300 mm
Height
600 mm
Weight
150 kg
Length:500 mm
Width:300 mm
Height:600 mm
Weight:150 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Vubhhu
Code: ST3309
MPE Yates 12 Ton Universal Welding Positioner
Capacity: 12 tons
Table Dia: 1200mm
Esvoyf9ou
Rotate
Tilt
Adjustable Height
Technical specifications:
Work plate: 12000 x 3000 mm
Steel cutting: 40 mm
Working angle: 45°
Plasma Source: Hypertherm HPR260
More info:
Plasma rotary head machine for bevel cutting up to a maximum of 45 °.
Donaldson DFPRO 12 CY Suction Unit
Notes:
Availability from august
Logistic cost - Approx. €12.000,00
Btgib7ivz8
TIG welding rod, welding wire
Stainless, IK-resistant (wet corrosion up to 350 °C). Corrosion-resistant like similar low-carbon and stabilized austenitic 18/8 CrNi (N) steels/cast steel grades. Cold toughness down to -196 °C. Connections and surfacing of similar stabilized and non-stabilized austenitic CrNi (N) and CrNiMo (N) steels/cast steel grades. Connections and surfacing on cold-tough matching/similar austenitic CrNi (N) steels/cast steel grades.
-net weight: 5 kg
-Number: 2x package av...
output 70 kva
Ggbugrer
ca. 20
weight of the machine ca. 460 kg
Capacity Driver 150 tons, Idler 150 tons = 300 tons total
Work piece diameter Minimum 1000 mm - maximum 8000 mm
Tyre width 203 mm
Input 400 / 3 /50
Fitted with Mechanical anti - creep facility
Features Rotation speed 75 - 1500 mm per minute
Ufbozsu
Length Driver 4200 mm, Idler 4000 mm
Width Driver 1550 mm, Idler 1050 mm
Height Driver 1414 mm, Idler 1414 mm
Nett weight approx. 17000kgs
MXE control panel, for welding aluminum, stainless steel, steel,
synergic controlled, possibility to save programs, electrode welding, pulses, double pulses
Dimensions
Length
1.000 mm
Width
400 mm
Height
1.200 mm
Weight
200 kg
Downloads
MXE control panel, for welding aluminum, stainless steel, steel,
synergic controlled, possibility to save programs, electrode welding, pulses, double pulses
Length:1.000 mm
Width:400 mm
Height:1.200 mm
Btnyb9flhi
Weight:200 kg
Please Note: The information ...
cutting width:3100 mm
Kkvph9xr
Numbers of torche:4
Type of gas:Propan
The Sato Satronik D 4200 is a very reliable modern CNC controlled oxyfuel cutting machine in gantry design
Mobile welding machine, make OrLaser Type HTS Mobile
Year 2018
Power 200 Watt
Operating hours approx. 620
Oqvgd
(further data on request)
TIG hose package, welding torch, hand welding torch, TIG torch
-with torch body
-Length: 4 m
Lidkj
-Tuchel connector: 5-pin
-Water: cooled
-Weight: 1.5 kg
Hypertherm HPR400
O3xex
output 94 kva
Serial No. C37803
Amperage 250
Input 400/3/50hz
Btkjqepjij
Duty cycle 40%@200A, 60%@160A, 100%@125A
Equipment Earth lead, Torch
Features Front casters rear wheels
Length 940mm
Width 500mm
Height 760mm
Nett weight actual. 80 Kgs.
Length:400 mm
Width:200 mm
Height:250 mm
Weight:25 kg
O7x09
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
ampere 500 A
current capacity 30 kVA
Cietn7cc
voltage 400 V
total power requirement 42 A
weight of the machine ca. 0,2 t
dimensions of the machine ca. 0,6 x 0,7 x 1,2 m
MIG welding source transformer with 60 A/12-17 Volt - 500A/39-42 Volt
table diameter 400 mm
table load waagerecht 200 Kg
table load senkrecht 100 Kg
table turning speeds 0,2- 2 U/min
voltage 230 V / 50 Hz
total power requirement 0,55 kW
weight of the machine ca. 65 KG
dimensions of the machine ca. 0,65 x 0,5 x 1,0 m
Benyqcbcfe
unused stock machine
manual tilt adjustment
Start-Stop by foot switch
with CE
MIG/MAG hose package
-Length: 4 m
-Messer Griesheim connector
-With suction
-Water: cooled
-Weight: 5.5 kg
Vqlswa
Manufacturer: Bystronic
Type: ByStar 3015
Year of manufacture: 2008
Control: Bystronic
X9i8vco
Laser: 4.400 W CO2
Working range: X: 3.000 mm
Y: 1.500 mm
Z: 170 mm
Special features: Cutting head 5 " + 7,5 "
shuttle table
Cooling system
dedusting system
without Bysoft
condition: in use
ready for testing
Beam: 25.000 h
Manufactured 2003Serial No. 0303203
Input 415/3/50hz, Nominal power 18 kVA
Throat 200mm
Fitted with Sureweld cooling unit
Equipment Mount to Robotix Arm 800mm Travel
Length 900mm
Width 700mm
Cnmojjpfs
Height 2400mm
Nett weight actual. 310 Kgs. (0.31 Tons)
Length:1.200 mm
O7x0b
Width:400 mm
Height:1.000 mm
Weight:50 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
floor-plate length 2500 mm
floor-plate width 1300 mm
Btnvn7zywo
floor-plate height 300 mm
weight of the machine ca. 2800 kg
Details:
Table length 2500 mm
Table width 1300 mm
Table height 300 mm
Machine weight approx. 2800 kg
Space requirement approx. 3 X 2 with underframe approx. 800 mm
table length 590 mm
table width 590 mm
table load 200 Kg
table turning speeds 0,23 - 2,3 U/min
Benypo8w7c
table height 650 mm
total power requirement 0,55 kW
weight of the machine ca. 600 Kg
Plasma hose package
-Hose package: air-cooled
-Euro central connection (see picture)
-Length: 5.5 m
7cidj00n
-Weight: 4 kg
current capacity 45,0 kVA
throat 163 - 438 mm
contact pressure capacity 1040 - 2600 N
connected load frequency 400 Volt
weight 192 kg
P09bhzrd
Fitted with Earth cable, gun
Length 700mm
Width 500mm
Height 750mm
Nett weight actual. 110 Kgs.
Bpz90gr9j3
Length:1.200 mm
Width:400 mm
Height:1.000 mm
Weight:50 kg
P7sqjob2
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
length / mm
height / mm
total power requirement / kW
Type: US 100 E 300
Btnv90akik
Nominal power: 100 kVA
max. weld length: 324 kVA
current intensivity 400 A
open-circuit voltage 65-75 V
IP protection class IP21
Permissible load
at 35% duty cycle 400 A
at 60% duty cycle 315 A
at 100% duty cycle 250 A
Idle power 0.49 kW
Application class: S
Hdqlky2
- Water cooled
- With hand and foot remote control
- Incl. Hose package approx. 6000 mm
MIG/MAG hose package
Ql0tdukn8
-Length: 4 m
-Tuchel connector: 3 pin
-Gas: cooled
-Weight: 4 kg
current capacity ca. 12 kVA
throat 345 mm
contact pressure capacity max. 1.800 N
connected load frequency 380 Volt
Bi28iysbhu
With Wire Feed and ChillerAmperage 359
Input 380/440/3/50hz
Duty cycle 350A o 60% 400A @ 45%
Duty cycle period 10 minutes
Fitted with Tecarc wire feed, Wilkinson chiller
Length 725mm
Width 500mm
Cbkpxlrw
Height 970mm
Nett weight actual. 260 Kgs.
Length:500 mm
Btnxsyzmjv
Width:200 mm
Height:200 mm
Weight:25 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
diameter / mm
plate thickness / mm
current capacity // kVA
Jwsgae
M 551 DW
25A / 15V - 560A / 42V
LxBxH: 90x50x115 cm
table diameter 450 mm
table load waagerecht 300 Kg
table load senkrecht 150 Kg
Btr9hlva
table turning speeds 0,2- 2 U/min
voltage 230 V / 50 Hz
total power requirement 0,55 kW
weight of the machine ca. 80 KG
dimensions of the machine ca. 0,65 x 0,5 x 1,0 m
unused stock machine
manual tilt adjustment
Start-Stop by foot switch
with CE
MIG/MAG hose package
Ql0sqr9f3
-Length: 3 m
-Euro plug
-Water: cooled
-Weight: 3.7 kg
Spare parts for used Müller Opladen pipe cutting machines. The individual spare parts can be seen in the pictures. It is only possible to buy all control cards in one package.
Be02phrj89
With Wire FeedAmperage range 70 - 400
Halpf9
Duty cycle 400A @ 60%
Equipment Tecarc F40 wire feed, Mig gun
Length 885mm
Width 720mm
Height 930mm
Nett weight actual. 170 Kgs.
Length:4.000 mm
Width:1.401 mm
Height:2.000 mm
Weight:400 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Btnxqc8zvm
Joisten & Kettenbaum
Biac7ikiux
serial number 9600/2
current capacity 15 kVA
weight of the machine ca. 300 kg
current intensivity 24 / 27 A
output 16 / 18 kVA
voltage 380 V
0,54
connected load 4 x 6 mm²/CU
35 A
weight of the machine ca. 235 kg
dimensions of the machine ca. 850 x 610 x 1050 m
Bensbrchlp
TIG hose package, welding torch, hand welding torch, TIG torch
Ql0yfykcp
-with torch body
-Length: 4 m
-Tuchel connector: 3-pin
-Water: chilled
-Number: 2x hose packages available
-Price: per piece
-Weight: 2.4 kg
max. temperature 400 Grad
size of opening 510 x 490 mm
V7wnumc
depth of chamber 610 mm
Daylight opening 510 mm
voltage 400 Volt
total power requirement 3,75 kW
weight 146 kg
range L-W-H 810 x 740 x 1080 mm
With Wire FeedAmperage 400
Input 400/3/50hz
Qs39b07n
Amperage range 30 - 400
Duty cycle Mig 400A @ 100% MMA 400A @ 80%
Wwelding speed 1.5 - 18 m/min
Fitted with 4 roller wire feed, Inching
Equipment Jasic wire feed, earth cable, wire gun
Length 595mm
Width 285mm
Height 470mm
Nett weight actual. 60 Kgs.
Length:4.000 mm
Width:1.401 mm
Height:2.000 mm
Weight:400 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Blxc2v7g
Joisten & Kettenbaum
current capacity 12,5 kVA
weight of the machine ca. 390 kg
Biacz9nkym
output 12,8 kVA
F
Kl. F
Bndxzwpm
IP 23
dimensions of the machine ca. 560 x 250 x 480 mm
TIG hose package, welding torch, hand welding torch, TIG torch
Hizqvb3oo
-with torch body
-Length: 4 m
-Tuchel connector: 5-pin
-Water: cooled
-Weight: 2.7 kg
max. temperature 400 Grad
size of opening 510 x 490 mm
depth of chamber 610 mm
Daylight opening 510 mm
voltage 400 Volt
weight 146 kg
range L-W-H 810 x 740 x 1080 mm
total power requirement 3,75 kW
Bpblkvghif
Serial No. 19980
Capacity 50KVA
Input 400/2/50hz
Jic99nb
Throat 450mm / 800mm
Nett weight actual. 600 Kgs.
Table Ø: 600 + 800 mm
Table load on 200 mm:650kg
Table load on 400 mm:200kg
Table load on 1000 mm:100kg
Rotation table: 0,076 - 1,5 °
Length: 1.200 mm
Width: 800 mm
Height: 800 mm
Weight: 500 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute ...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
Photo gallery: the 10 strongest forklift trucks in the world
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 220,000 inquiries per month
