Laminating machine

Bagel DIGIFAV-B2 L530

Condition: good (used), Year of construction: 2004, Used Bullmer 7501 XL cutting machine - useful cutting window width 180 cm. - max cutting thickness 7 cm. - in good condition. Ndodpfx Aortnh Ejb Esd

Year of construction: 2012, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg SOURCE: FIBER 4000 ; 4000 W CONTROL UNIT: ByVISION WEIGHT: 15000 Kg OVERALL DIMENSIONS: 12900 x 6750 x 2500 mm ACCESSORIES: FUME EXHAUSTER Nedpfxjvghbqo Ab Eodd NOTE: AUTOMATIC NOZZLE CHANGE

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, total length: 2,700 mm, total width: 1,200 mm, working width: 530 mm, Industrial machine lamination for offset and digital, simultaneous front & back laminating. The machine is equipment with Heidelberg vacuum feed. New equipment ! Equipment has not been used for work but only for initial testing/installation. Laminating machine to be perfectly adapted for both offset printing and digital printing with dry toner. Nodpfxemcw T To Ab Eedd Maximum speed: 25 m/min (working speed is variable depending on several factors: paper/cardboard substrate, the type and quality of the laminating foil and the type of printing (offset, ink, laser or digital). It can laminate one side or both sides in one pass, working speed up to 25 m/min can be achieved even in double-sided mode. - Maximum average size 53 X 100 cm; - minimum dimensions width 30 cm X length 20 cm; - average thickness between 115 gsm and 600 gsm; Full option equipment: - automatically overlaps and separates plasticised sheets, - allows adjustment of pneumatic pressure between the rolls and can work in heavy duty mode in case of large runs such as packaging. - can laminate even plastic window packaging with non-adhesive rollers (2 non-adhesive rollers); - the way to apply metal foil and achieve selective lacquer effect; - adjustable hydraulic pressure; - Hilderberg vacuum feed from 54 cm high stack and automatic lift and 6 bar 130 l/min external compressor; - jogger for receiving laminated sheets, with 10 cm stack; - equipped with 2 pneumatic axles for fixing the laminating roll; - equipped with 2 pairs of press rollers for front/back lamination; - accepts 3000 m rolls, foil between 24 and 31 microns; - BOPP film accepted between 23 and 42 microns, Nylon maximum 35 microns, PET maximum 35 microns (regardless of film producer); - longitudinal slitting knife; - longitudinal perforating knife; Floor area 120 x 270 cm Power supply: 3-phase, 400V AC, 50-60 Hz Power consumption: 7,500 W The machine is equipped with the following options: 2 non-stick cylinders 2 pneumatic axles for fixing the rolling roll 2 pairs of press rolls for double-sided lamination FOILER - unit for foiling and laminating with UV selective varnishing effect Jogger for receiving laminated sheets Large format module (max.53x100cm) Negociable price EXW - old price 49.000 - new price 30.000 euro + VAT (without VAT in EU).

Condition: as good as new (ex-display), Year of construction: 2021, 7-axis Romer arm with 1,200,000 points per second laser RS6 head, Ndedpoipq Ivefx Ab Ejd 2.5m measuring range. Complete with remote control, pcdmis software. It is a fantastic machine with automatic weight balancing. High productivity and accuracy with excellent ability to scan on any surface. Software available upon request: included PCDMIS CAD++ with MESH option.

Condition: like new (used), Year of construction: 2015, operating hours: 3,600 h, functionality: fully functional, machine/vehicle number: 2667, AUTOMATICALLY-FED SOLID FUEL BOILER MOD. EOS 50 INCLUDES SPRING-LOADED ROTARY WOOD CHIP FEED SYSTEM AS PER PHOTO COMPLETE WITH WATER CIRCULATION AND STORAGE SYSTEM AS SHOWN IN THE PHOTOS FULLY FUNCTIONAL SERIAL NO. 2667 YEAR OF MANUFACTURE: 2014 THERMAL OUTPUT AT THE COMBUSTION CHAMBER: 650 KW Nodpew E E Tasfx Ab Eedd USEFUL THERMAL OUTPUT: 550 KW OTHER APPLICABLE EU DIRECTIVES: 2004/108/EC; 2006/95/EC APPLICABLE STANDARDS / TECHNICAL SPECIFICATIONS: EN303-5; EN60335-2-102; EN14891-1

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Tactile Sensor: TP20 Probe changer: -- Ndjdpfxsipq I Ij Ab Ejd Controller: Pantec Eagle Software: CMM Manager Lite 2024 Year of construction: 2001 Warranty: in terms to be agreed upon Description: machine fully functional and in excellent cosmetic condition: Pneumatic system completely overhauled;

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Ndsdpswrp Emsfx Ab Esd Price for Novapac: €19,000 Equipment visible in the las

Condition: used, Year of construction: 2006, functionality: fully functional, color channels: 5, paper weight (min.): 40 g/m², paper weight (max.): 370 g/m², paper width (min.): 400 mm, paper width (max.): 800 mm, paper height (min.): 260 mm, paper height (max.): 600 mm, input voltage: 380 V, Sakurai OL575SD - 5 Colors + Coater Year: 2006 Impressions: 50,000 Max Sheet Size: 60x80 cm Double development cylinders Detachable grinding from unused printing units Printing speed: 15,000 sheets/hour SPC - Sakurai Plate Changing SAS - Sakurai Auto Set Ndjdjwtzp Topfx Ab Ejd SCC III - Sakurai Colour Console - Type 3 Automatic washing Cloth blanket washing device IR Dryer (Grafix) Chambered doctor blade anilox coater

Condition: refurbished (used), Year of construction: 1999, TECHNICAL FEATURES: Press Model: T50 CNR4 Year of construction: 1999 Nsdpfxsqbtc Ne Ab Ejdd Rated force: kN 500 Mass: kg. 3.500 Strokes per minute: No. 90 Max. insertions per minute: No. 41 Min./max. operating air pressure: BAR 4÷5.5 Stopping time: s 0.117 Safety distance: mm 187 Energy: KJ 2000 Min./max. adjustable stroke: mm 8÷100 Mace adjustment: mm 70 P.M.I high adjustment: mm.280 Maximum extraction stroke: mm. 30 Work surface area: mm 770x530x58 Mace plane size: mm. 450x300 Shank diameter: mm. 45 Overhang from the center: mm 270 Max. mold size: mm 450x300 Upper mold mass: kg 84 Voltage: V 400 Complete with user manual and CE compliance Warranty six (6) months excluding electronic parts NEW COMPONENTS INSTALLED: - Engine bearings; - Flywheel bearings; - Engine belts; - Clutch plates; - Front accident guards; - Work surface brightened on CNC machine; - Foot pedals.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89037, workpiece weight (max.): 13,000 kg, PARALLEL LATHE CWGIIOOE 500x5000mm weight 13000kg. Machine complete with 4 independent jaw self-centering chuck mm 1000. Height of tips mm 500. Distance between tips mm 5000. Ndedpfx Abevzxate Eed