Mixer

Beccaria TVE 500

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Lsdsw Nhavjpfx Ahzsrg Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Condition: excellent (used), Year of construction: 2022, operating hours: 1,615 h, functionality: fully functional, Make Kiefel Lrjdpfx Ajxwwf Nehzog Model KMD 78.1 PR Year 2022 Condition Excellent Delivery date Immediately Approx hours 1615 Stations Four Max tool dimensions 780 x 600 mm Maximum forming area 760 x 580 mm Minimum forming area 375 x 350 mm Sheet thickness range 0.2 - 1.8mm Depth of draw 150 mm +/- Max film width 810 mm Cutting Station Force 500 kN Hole Punching Station Force 300 kN Operating pressure 6 bar Max dry cycles / min 40 All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Lrsdpfx Aheh Akm Tszog

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Lredpfx Ahokkiwxszog

Condition: good (used), Manufacturer: Bieffebi Tip: Mirage Cylinder length: 1350mm Lrjdpeixtn Hjfx Ahzjg Cylinder diameter: 340mm

Year of construction: 2007, condition: ready for operation (used), Weight: 2t, an inspection is possible, with documentation. Lsdpfx Aerp E Nrshzjrg

Condition: excellent (used), Very nice 8 rack oven, perfect for cooking proteins. Direct from recently closed factory. Lodpsqx A H Ajfx Ahzjrg

Year of construction: 2017, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, For sale: 1 gas-fired chamber oven with air circulation and bogie hearth Manufacturer: Nolzen Industrieofenbau GmbH & Co. KG Type: KLWg 220/180/650 YEAR OF MANUFACTURE: 2017 for unsupervised operation Lrodpfsr Hmg Rjx Ahzog for three-phase 400Volt three-phase current for temperatures up to max. 700 degrees C. for natural gas "H", liquid gas Number of burners: 8 Total burner output: 720kW For further technical data see attached PDF. The stove itself was only in operation for 4 years and has made approx. 100 anneals of 23 hours each during this time.

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Lodpfxjv T An So Ahzsrg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION800-270 Baujahr: 2007 Schließkraft: 80 Tonnen Holmabstand 410 x 410 mm Einbauhöhe min. /max.: 500 mm Öffnungsweg: 350 mm Schnecken DN: 35 mm Max. Hubvolumen: 123 cm³ Ledpswf I Hisfx Ahzorg Spritzteilgewicht in PS: 118 g