Screw capper 6 heads

BERTOLASO Sigma 606

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Psdpjwra S Rofx Agvegr Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Pgsdpfotrbrqsx Agvor

Year of construction: 2004, condition: ready for operation (used), Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021. Pgedohix Ukepfx Agvjr

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Pgjdpstuyq Refx Agver

Year of construction: 2016, condition: good (used), Item: M-3525-APV-Pump-W+65/350-235 STD APV Centrifugal Stainless Steel Pump Type: W+65/350-235 STD, Year: 2016 2 pieces identical! 11 kW, 1450 Rpm Used! Pgsdekt Upnjpfx Agvjr

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST Pgodpfx Aovrfivsgvjr - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: Podpfxorai N Ae Agvjgr - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter - Control cabinet

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Podpol Hx Adjfx Agvegr

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, empty load weight: 1,450 kg, For sale is a Jumag steam generator with oil burner. Optionally available with gas burner upon request. The unit is in very good condition. Model DG 560. Year of manufacture: 2011. Steam output: 560 kg/h. Maximum steam pressure: 13 bar. Delivery available at extra cost. On-site inspection possible. Please contact us with any questions. Pgodpfx Agsydnzijver

Condition: used, Year of construction: 1991, Used capping machine BERTOLASO Aluminium screw up to 1200 bph The Bertolaso aluminium capper clearly meets the needs of bottling with aluminum caps. Moreover, technicians overhauled this model in 2008 and adapted it for Stelvin capping, thereby ensuring reliability and versatility. Technical specifications The machine effectively uses one capping head to operate with aluminum screw caps. Furthermore, the system performs a clockwise rotational movement to ensure a uniform and precise capping process. Consequently, it processes 1200 bottles per hour, making it an ideal solution for small and medium productions. Pgodpfx Aovgva Iogvjr The compact dimensions of the machine, measuring 1200 mm in length, 900 mm in width, and 1200 mm in height, therefore enable easy integration into existing production lines. Additionally, its weight of 0 kg provides a stable and durable structure suitable for intensive use. Safety and maintenance Integrated safety features undoubtedly protect operators during use. Thus, these systems keep the machine compliant with modern industrial safety standards. Besides, the modular design and availability of original Bertolaso components simplify regular maintenance. Efficiency and adaptability This machine, ready for use, optimizes production times while maintaining a high level of capping precision. Moreover, the adaptation for Stelvin caps satisfies current market demands and, as a result, offers greater flexibility compared to the original model. Applications The Bertolaso screw capping machine efficiently serves various industrial sectors, including wine, food, and beverage industries. Consequently, its versatility and high performance provide an optimal choice for companies requiring a reliable and efficient machine for aluminum cap closures. Conclusion The VB 40 V 22 model delivers robustness, efficiency, and safety. Furthermore, it caps 1200 bottles per hour and adapts for Stelvin capping, thus making it a highly competitive solution for companies of various sizes. Consequently, Bertolaso reliability and compliance with safety standards make this machine a valuable investment in the bottling sector.