Beverage making machine

Bottling Bertolaso 16.16.1 Bottling Filling Monoblock 3.000 bph

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) Cedjw Uf Ihepfx Ac Nerb High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: used, Year of construction: 2018, Overview  This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data Filling system: Isobaric (for beer and other carbonated beverages) Capacity: 900 bottles/hour Bottle formats: 0.25 L – 1.0 L Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Electronic fill height adjustment Stainless steel construction Credpfx Acjxn A R Ee Neb

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Cjdpfx Acstrbrqj Nsrb

Condition: like new (used), Year of construction: 2017, operating hours: 610 h, functionality: fully functional, 1) 12-STATION RINSER IN 2 PHASES (WATER+AIR) for bottles with a maximum diameter of 115 mm. The rinsing process takes place only when bottles are present. The parts of the rinsing nozzles have no contact with the bottle neck. 2) 12-STATION ELECTROPNEUMATIC HIGH-PRESSURE FILLER for bottles with a maximum diameter of 115 mm The fill level can be electrically adjusted from the control panel without manual intervention from 25 to 100 mm below the bottle neck. Each filling valve is equipped with a sterilization bottle for cleaning and sterilizing the machine. The sterilization bottles are positioned manually. The filling valve operates with still and carbonated liquids from 0 to 8 bar. The fill level is precise 100 %. 3) MONOHEAD Crown Capper for D26 crown caps. Screw Cap can be installed for an additional fee Feeding and transfer between stations is performed by screw that guide and synchronize the bottles. Monoblock equipped with: - Protective enclosure compliant with CE standards, featuring tempered glass doors - Universal screw - Motor-adjustable side guides - Dummy bottles for sterilizing the rinsers - PLC and TOUCHSCREEN control panel - Electric height adjustment of all stations OPTIONS: Credpjyukiwjfx Ac Neb - Washing of the bottles on exit using 7 nozzles, - Interior lighting with 4 LED strips - Machine equipped for remote assist. Capacity*: 1,100 liters/hour Speed: 1,000 - 3,000 bottles/hour (INVERTER) * Actual capacity depends on several factors: A) Liquid B) Filling temperature C) Bottle pressure D) Bottle type With Filler we will give for free also the packing table

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. Csdpeu Nhiqofx Ac Nsrb The machine comes with original electrical documentation.

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: -washing machine Manufacturer: Kitzinger Year of manufacture: 2011 Output 1500 - 3000 bottles/h -bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 -swing top sealer Manufacturer: Rico -labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 -laser printer for dating Manufacturer: Domino -bottle collecting table Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Capacity: 3000 bottles/h Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Credpfxsxbnyle Ac Neb Features: Kitzinger bottle washing machine capacity 1500-3000 bottles/h; Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine Domino laser printer for dating; bottle collection table

Year of construction: 2022, condition: new, Stainless steel execution Motor power 1 .1kw Cjds Hnmvepfx Ac Norb left - right rotation Stirring wave length 1000 mm Mixing blade diameter 150 mm

Condition: used, Year of construction: 1991, Used capping machine BERTOLASO Aluminium screw up to 1200 bph The Bertolaso aluminium capper clearly meets the needs of bottling with aluminum caps. Moreover, technicians overhauled this model in 2008 and adapted it for Stelvin capping, thereby ensuring reliability and versatility. Technical specifications The machine effectively uses one capping head to operate with aluminum screw caps. Furthermore, the system performs a clockwise rotational movement to ensure a uniform and precise capping process. Consequently, it processes 1200 bottles per hour, making it an ideal solution for small and medium productions. The compact dimensions of the machine, measuring 1200 mm in length, 900 mm in width, and 1200 mm in height, therefore enable easy integration into existing production lines. Additionally, its weight of 0 kg provides a stable and durable structure suitable for intensive use. Safety and maintenance Codpevgva Isfx Ac Nerb Integrated safety features undoubtedly protect operators during use. Thus, these systems keep the machine compliant with modern industrial safety standards. Besides, the modular design and availability of original Bertolaso components simplify regular maintenance. Efficiency and adaptability This machine, ready for use, optimizes production times while maintaining a high level of capping precision. Moreover, the adaptation for Stelvin caps satisfies current market demands and, as a result, offers greater flexibility compared to the original model. Applications The Bertolaso screw capping machine efficiently serves various industrial sectors, including wine, food, and beverage industries. Consequently, its versatility and high performance provide an optimal choice for companies requiring a reliable and efficient machine for aluminum cap closures. Conclusion The VB 40 V 22 model delivers robustness, efficiency, and safety. Furthermore, it caps 1200 bottles per hour and adapts for Stelvin capping, thus making it a highly competitive solution for companies of various sizes. Consequently, Bertolaso reliability and compliance with safety standards make this machine a valuable investment in the bottling sector.

Condition: excellent (used), Year of construction: 2017, SYNCROBLOC FOR LABELING AND BEER BOTTLING IN GLASS Model: CFT S 94 / A Year: 2017 Production Capacity: Up to 12,000 bottles/hour Container Types: • 0.33 L glass bottles (long neck and champagne type) • 0.75 L glass bottles (champagne type) Supported Caps: • Crown Ø26 mm on 0.33 L long neck bottles • Crown Ø29 mm on 0.33 L champagne-type bottles • Crown Ø29 mm on 0.75 L champagne-type bottles Labeling: • Self-adhesive front and back labels for 0.33 L long neck bottles • Wrap-around self-adhesive labels for 0.33 L and 0.75 L champagne-type bottles PE LABELER Maximum Output: • 12,000 bottles/hour without orientation • 11,000 bottles/hour with orientation Operations: • PLC + touch-screen panel for control • Automatic speed adjustment via inverter and sensors • Status indicator column light Main Components: • 4 self-adhesive labeling stations • Optical fiber system for bottle orientation • Photoelectric sensors for transparent labels • Label ionizer to eliminate static charges • No-Stop labeling system (label change without stopping production) Safety and Structure: • CE-compliant safety guards with protective doors • Plate rotation with servo motors and encoders • Electrical cabinet in AISI 304 stainless steel CFT MONOBLOCK COMPOSED OF: • Fixed nozzle rinser, single treatment, 30 grippers • Isobaric filler with 30 valves • Crown capper with 6 heads • Pitch between valves: 113 mm • Supported bottle diameters: 50 - 98 mm Crsdpfjwnybqjx Ac Nob • Supported bottle heights: 125 - 365 mm • Production Capacity: 12,000 bph on glass bottles Filling Features: • Servo-controlled valves for electronic filling phase management • MasterTronic system for automatic regulation of filling phases (pre-evacuation, filling, decompression) • CIP/SIP system for sanitization with automatic dummy bottles Crown Capper • Suitable for Ø26 mm and Ø29 mm crown caps • Centrifugal cap feeder with cap presence sensor • Pick & Place device for cap transfer • Pressure heads with magnetic pickup AUTOMATIC QUALITY CONTROL INSPECTOR Checks Performed: • Minimum and maximum filling level (with foam compensation) • Cap presence via photoelectric sensor • Label presence with dedicated sensors • Automatic ejection of non-compliant bottles Software Features: • Real-time visualization of filling and production statistics • Storage for up to 60 bottle formats • MODBUS connection for remote data management INKJET CODER • Printing of codes on bottles and labels • Support for different types of ink CAP ELEVATOR

Condition: used, Year of construction: 2009, Overview  This model 4300 DE-ST9 sleeve labeling machine was manufactured by FUJI SEAL EUROPE B.V. in 2009. Photos and an operational video are available, as well as the general layout of the line. Technical details  Manufacturer: FUJI SEAL EUROPE B.V. Model: 4300 DE-ST9 Year of manufacture: 2009 Last format: 0.25 liter  Codou Rwdyjpfx Ac Njrb