Used lowboy semi-trailers / low loaders for sale (272)

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, Wiese 3-axle semi-trailer with lift table and fold-down rear. Ideal for transporting forklift trucks and/or work platforms. Technical data. 3 x 10 to. axles Lift axle Steering axle Smart Steering (steers forwards and backwards) Outer beam chassis with slope 18-tonne neck design suitable for 2- and 3-axle semitrailer tractors Lifting table hydraulically movable in 3 positions Rear in folding rear design incl. hydraulic extensions, can be used as drive-on ramps, drive-over ramps or as a loading area (overall length reduction when rear is raised) Iiodpfsvw Hmtex Ah Usk Remote control for ramps and lift table Front wall Grid floor Numerous lashing points SmartBoard Central lubrication system Spray-galvanized and painted steel construction Numerous optional extras are available: e.g: Cable winch Storage box on the saddle step aluminum rims Further information on request.

Condition: new, maximum load weight: 48,180 kg, overall weight: 70,700 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment features. Full equipment list available on request. GOOSENECK * Gooseneck with integrated single-axle chassis (pendle axle) in removable design * Gooseneck hydraulically height-adjustable, including hydraulic connection linked to the hydraulic axle compensation for the front axles * Length: approx. 5,200 mm, with front taper approx. 60° * Suitable for tractors: 6 x 4 or 8 x 4 * Plug-in steel front wall, approx. 400 mm high, in angled design * 1 pair of mechanical support legs at the front of the gooseneck, foldable (LC 10,000 daN) * 1 pair of plug-in aluminium side boards, approx. 400 mm high, anodized finish * 1 plug-in aluminium rear board, approx. 400 mm high, anodized finish * Checker plate covering above the gooseneck * 3.5-inch kingpin * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * 1 INOX tool box with single lid, bolted to the right side of gooseneck in the direction of travel, by the ALU sideboard, approx. 1,350 x 400 x 400 mm (L x W x H) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling * 1 LED work light each on the left and right on the rear cross member of the gooseneck, wired to the connection bar for the tractor unit LOAD DECK * Low-bed with external beams, designed as telescopic load deck in low-profile construction with front extension, including fixed approx. 50 mm hardwood floor, length x width approx. 8,000 mm x 2,740 mm * One locking point approx. every 1,000 mm on the extension * Fixed drive-on ramps at the front of the loading platform with climbing strips * 1 lashing ring on the outside of the fixed drive-on ramp (LC 10,000 daN) * 1 lashing ring suspended on the outside on each left and right at the front cross member (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200–1,300 mm on the inside beams of the low-bed * Lashing rings with retaining spring approx. every 1,200–1,300 mm on the outside beams of the low-bed (LC 10,000 daN) * Recesses above lashing rings in the upper flange of the outside beams Ijdpfowx Ddwex Ah Ueik * Mechanical pin-lug coupling from the low-bed to the chassis to change the load deck or install extension beams, with electro-pneumatic-hydraulic couplings * The outside beams of the low-bed with a painted-on sand layer for anti-slip protection * 4 pairs of recessed lashing rings lying in the load deck, distributed along the outer frame/outside beam (LC 10,000 daN) * 1 lashing ring outside each on the left and right on the rear cross member (LC 10,000 daN) * Fold-out deck wideners, approx. 230 mm per side * Loose widening planks, steel-edged * 6 pairs of threaded blocks between the lashing rings under the upper flange on the outside beam, for mounting bolted rings M24 (LC 8,000 daN) * 2 pairs of M24 bolted rings (LC 8,000 daN) included REAR CHASSIS * Rear chassis with closed outer frame, checker plate covering and continuous prism excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear PENDLE AXLE * All axles hydro-mechanically forced steering * Burst hose valve on the axle compensation cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-fittings to secure in raised position * Final painting of axles with 2 layers of 2-component paint, solid color in DB 7350 Novagrau * Hydraulic axle compensation * Tires 245/70 R 17.5 3PMSF * Suspension bar

Condition: used, empty load weight: 5,780 kg, maximum load weight: 20,920 kg, overall weight: 26,700 kg, axle configuration: 2 axles, first registration: 06/2011, next inspection (TÜV): 06/2024, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 3,200 mm, suspension: air, wheelbase: 1,300 mm, Year of construction: 2011, gearing type: other, driver cabin: other, Equipment: ABS, * German semi-trailer * 1st owner * Special low-loader trailer from premium manufacturer Meusburger * Model MPG - 2 * Superstructure with sliding roof device * Enables side loading * Also allows loading from above and rear * Ideal for transporting heavy goods, equipment, construction machinery, vehicles, etc. * 21 t payload * 3x 4.2 t load capacity Altec loading ramps * Ramp compartment * Sliding tarpaulin left & right with Edscha sliding roof * Platform length: 7.20 m x 2.50 m x 3.20 m * Loading height: 0.80 m * Platform front loading height: 1.60 m * Length: 3.30 m x 2.50 m x 2.35 m * Wooden loading floor with DIN lashing rings * Aluminium portal doors * BPW Eco Plus axles * Air suspension + raising/lowering * 2 x extendable storage boxes * ABS/EBS * GVW: 26,700 kg * Unladen weight: 5,780 kg * Payload: 20,920 kg * Kingpin to front dimension: 1.45 m * Diagonal kingpin to front: 1.75 m * Kingpin to rear dimension: 9.35 m If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Iodpfx Ahorkn R To Ujik Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to ensure there are no misunderstandings regarding their condition and suitability. Viewings and inspections are possible anytime upon appointment and are expressly desired. All information is provided without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: used, empty load weight: 18,240 kg, maximum load weight: 45,760 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 02/2012, next inspection (TÜV): 01/2024, loading space length: 12,120 mm, loading space width: 2,740 mm, loading space height: 550 mm, tire size: 285/70R19.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4-axle, SAF axles, forced steering, lifting+lowering, ABS (anti-lock braking system), lashing eyes Body: Low-bed semi-trailer with 3 hydraulically steered axles & jeep dolly. Including jeep dolly with 10t SAF axle & tires 295/80R22.5! Rear 3x 12t SAF axles! Widenable to 3.2m, 8m in drop deck! With radio and cable remote control, automatic tracking. A construction description is available and can be sent on request! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ijdpfx Ahjndh Ume Uoik - .

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2021, next inspection (TÜV): 02/2025, loading space length: 7,000 mm, loading space width: 2,530 mm, Equipment: ABS, * 2-axle VEGA * Loading ramp * Air suspension Ijdpfx Ahjxu Ti Es Uoik * Tyres: 205/65R17.5 * Trax axles * Unladen weight 5750 kg ----Internal vehicle number: 11502-----Subject to errors & prior sale

Condition: used, empty load weight: 7,300 kg, maximum load weight: 37,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Reinforced design, length of high bed approx. 4,180 mm, length of low bed approx. 9,400 mm, loading height approx. 900 mm, 12 x stake pockets in the outer frame, 3 x cross stake strips, 14 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Iiodpfxoxuprpe Ah Ujk

Condition: used, maximum load weight: 25,750 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2020, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Vehicle Type: Wiese Forklift Transporter with curtain-side body, lifting roof, and trailing steering axle. * Model: SA 3-36 SK Fifth Wheel Height: 960 mm Body: Curtainsider version with sliding curtains on both sides * Extended tarpaulin version * Sliding roof * Ice-Protect * Tarpaulin with quick-release fasteners and tensioners for positive locking * Illuminated overwidth markers Lifting Roof: Hydraulically operated lifting roof Ramp: Hydraulic fold-down tail ramp, 25-ton capacity Chassis: 3 x 9-ton axles * Lift axle * Trailing steering axle for optimized cornering Load Securing: Continuous lashing rails in the side frame, floor lashing points at regular intervals * Receptacles for plug-in planks to ensure lateral positive locking Iiodpfxexmudzj Ah Ujk Floor and Interior: Phenolic plywood flooring * Above the wheels: steel plate * Aluminium folding plate for crossing the step in the semi-trailer Support Equipment and Attachments: Two-stage landing legs at the front with large tread plates * Wheel chocks and side-mounted stainless steel storage boxes with recessed locks Electrical and Lighting: 24V system with side marker lights and LED tail lights * Standard connectors: 2x 7-pin and 1x 15-pin Wheels and Splash Protection: Steel rims * Mudguards with flexible wheel arch liners and mud flaps * 12x 235/75 R17.5 tires On request, we can offer the vehicle with new curtains and/or a new paint finish. Further information available upon request.

Condition: new, maximum load weight: 73,090 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list; the full specification is available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable * Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 2-Axle Compact Front Bogie: * Hook mounts front and rear. Length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-on/lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 7,150 mm * Beam height: approx. 300 mm * Beam width: approx. 650 mm * Loading height approx. 450 mm, ground clearance approx. 150 mm 4-Axle Rear Bogie: * Mechanical pin/lug coupling for attaching a lowbed at the front * Rear closing cross-member * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm 2-Axle Front Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: approx. 14,640 kg (62 km/h) * Hydraulic axle compensation 4-Axle Rear Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: 14,640 kg (62 km/h) * Hydraulic axle compensation Tyres: * Tyres according to manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Entire steel structure is automatically blast-cleaned after welding using a turbine blasting system * Second round of blasting with corundum for optimal coating adhesion * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) * Final coat with 2 layers of 2-component topcoat, single colour in RAL 3002 Carmine Red, corresponding to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminium side and rear walls for the gooseneck, approx. 400 mm high * 3.5-inch king pin * Truck hydraulic connection with flow regulator (20 l/min), incl. gallows for supply line suspension * The tank of the tractor unit must have a minimum capacity of 80 l * With MAX Trailer couplings; otherwise, couplings to be supplied by the customer ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Multi-coupling hydraulic connectors on the gooseneck * Front bogie with separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 2-axle bogie with standard grease NLGI-2 * Prepared for receiving bolt-on container positioning for 1 x 20' or 1 x 30' containers on outer beams * Without container locks * Mounts on the outer beams of the loading area for installing folding marker extensions * BEKA-MAX central lubrication for a 4-axle bogie with standard grease NLGI-2 * Rear bogie equipped with a socket for remote cable steering * Rear bogie with trough Iiedpfjxbv Ausx Ah Uok * One LED beacon with mounts on the left and ri

Condition: used, empty load weight: 11,800 kg, maximum load weight: 36,200 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2022, total length: 2,550 mm, suspension: air, tire size: 245/70 R17,5, Equipment: ABS, | Faymonville Telemax F-S43 low loader | 3 axles steered by remote control | Heavy duty lashing points | SAF axles | extendable | Stake pockets | Tires: 245/70 R17.5 | Total weight: 48,000 kg, payload: 36,200 kg | 13,500mm+7,900mm+8,100mm | Subject to error, input mistake and prior sale. Isdpfx Aowm I Ipsh Uoik

Condition: used, empty load weight: 9,600 kg, maximum load weight: 30,400 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 12/2011, loading space length: 13,200 mm, loading space width: 2,500 mm, loading space height: 800 mm, suspension: air, tire size: 205/65R17.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles self-steering, ABS (anti-lock braking system), extendable, lashing eyes, drive-on ramps can be fitted, front support legs, rear support legs, lateral aluminium side guard, storage box. Iedpfxoxxkqze Ah Uoik Body: 4-axle low-bed semi-trailer with attachable drive-on ramps, SAF axles, 3rd and 4th axles self-steering, 13 pairs of lashing rings, 10 pairs of preparations for plug-in stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm loading height in the low-bed area, low-bed length approx. 9,500 mm retracted, next technical inspection (TÜV) due, aluminium ramps available at extra cost of €1,500. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted. - .

Condition: used, empty load weight: 6,560 kg, maximum load weight: 18,440 kg, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,540 mm, loading space height: 850 mm, wheelbase: 7,500 mm, color: blue, gearing type: other, driver cabin: other, Equipment: ABS, additional headlights, compressed air brake, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: Length 13,700 mm x Width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminum ramps, 3,000 x 400 mm, laterally movable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase 7,500 mm + 1,250 mm * Gross vehicle weight possible: 27,200 kg * Unladen weight: 6,560 kg * Payload possible: 20,640 kg If a new general inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new general inspection (TÜV), without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. Buyers are required to independently satisfy themselves as to the condition and specification of the goods/vehicles. Iijdpfx Ahexu Nnwj Uek Subject to change, prior sale, and errors.

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, 1x SAF or BPW axle Total weight: 19,500 kg Payload: 14,000 kg Empty weight: 5,500 kg Total length: 12,800mm + 1500mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension in full width 2550mm and length 1500mm Semi-trailer completely galvanized / galvanized (100% galvanized / 100% galvanized) Tire size: 215/70 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental. 5th Wheel Height: approx. 1050mm - 1150mm (other saddle heights also possible) Hydraulic winch 8ton with remote control with pulleys 24v 4.5KW electro-hydraulic motor Steel ramp: 2 pieces Changes possible according to customer requirements Iisdokqmuuepfx Ah Uok Painting freely selectable / free of charge All documents COC, Tüv, etc. available for approval.

Condition: used, maximum load weight: 26,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Wiese Mega curtain-side trailer with Dhollandia ramp 9t Iijdpfewx Trwjx Ah Uek * Dhollandia tail lift with ramp function * Type DHLSU.90, lifting capacity 9,000 kg, load centre 1,000 mm, supports * Remote control * SAF axles with air suspension and disc brakes * 1st axle liftable * Stainless steel toolboxes * Tyres 435/50R19.5 For further information, we are at your disposal

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display Iisdpfx Ajwx Dbioh Uok * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: new, empty load weight: 8,785 kg, overall weight: 33,000 kg, axle configuration: 3 axles, loading space length: 13,311 mm, loading space width: 2,500 mm, total length: 2,600 mm, total width: 4,000 mm, total height: 14,000 mm, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | Krone Cool Liner Multitemp Deep-Freeze Refrigerated Semi-Trailer – New Vehicle | Double-deck without crossbeams – beams available on request | Flower width, lift axle | Krone axles with disc brakes | Toolbox | Spare wheel holder | ThermoKing SLXi refrigeration unit | Tyres: 385/65 R22.5 | Diesel operating hours: 3h | Trailer from current production!!! | Subject to errors, input mistakes, and prior sale. Iisdpfxowl Rpyj Ah Ujk

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, total height: 142,000 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors! Iisdpfx Aoxwa Uyeh Usk

Condition: new, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, front wall approx. 800 mm high, 14 x stanchion pockets in the outer frame, 8 x stanchions, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iiodpfx Ahoxrmtro Uok

Condition: used, empty load weight: 9,480 kg, maximum load weight: 31,520 kg, first registration: 03/2020, next inspection (TÜV): 04/2024, total length: 11,500 mm, total width: 25,500 mm, total height: 38,000 mm, suspension: air, tire size: 245/70 R 17.5/10mm, wheelbase: 1,800 mm, front tire size: 245/70 R 17.5/10mm, operation weight: 41,000 kg,

Condition: used, maximum load weight: 26,100 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2013, next inspection (TÜV): 02/2025, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Krebs Mega sliding tarpaulin trailer with Dhollandia LBW 9 tons with ramp function Iijdpfx Ahou Em Nne Usk * Recently painted new tarpaulins, rear and front portal * SAF axles * 1st axle can be lifted * 3rd axle as self-steering axle * Dhollandia tail lift type DHLSU.90, lifting capacity 9,000 kg, ramp function * Radio remote control * 3 large storage boxes * Work lights * Ice-Protect We are happy to provide you with further information

Condition: used, maximum load weight: 57,900 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, first registration: 06/2024, next inspection (TÜV): 07/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpts from the equipment list. Complete specifications available upon request. Gooseneck: * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm in length * Rear of the gooseneck with bevel of approx. 1,000 mm x 10° * Technical fifth wheel load: 30,000 kg Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4 Ijdsxuypropfx Ah Ueik Loading platform: * Telescopic loading platform, approx. 8,800 mm in length, with rear ramp approx. 500 mm x 10° Axles and suspension: * BPW axles and suspension * 1st axle steered, equipped with electromagnetic reverse lock; all other axles hydro-mechanically forcibly steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * 235/75 R 17.5 3PMSF twin tyres, load index 143/141J (144/144F) Brake system: * WABCO EBS-E braking system, compliant with EU regulations Paintwork: * Trailer colour: RAL 3002 Carmine Red Accessories included: * Removable steel front wall, approx. 400 mm high * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches; without installation of power connections on the tractor unit * Stowage position on the gooseneck for warning signs when not in use * 1 mounting adapter for spare wheel in front of the gooseneck front wall (without spare wheel) * Outer carrier on the gooseneck with fixing holes for bolt-on lashing rings. First hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of removable ALU sidewalls, approx. 400 mm high, anodised * On the gooseneck, 1 removable ALU rear wall, approx. 400 mm high, anodised * Approx. 40 mm thick hardwood flooring over the gooseneck, checker plate over the kingpin * 2" kingpin * Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B * On the loading platform: continuous and axially interrupted approx. 50 mm thick hardwood flooring * Platform locking with conically welded locking profiles approx. every 500 mm * Slotted holes for hook-in and repositionable bridging elements: at front of loading platform * 1 sliding intermediate table, approx. 300 mm wide, for the high cross-section telescopic tube with checker plate surface; front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front crossmember (LC 10,000 daN) * 7 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards (LC 10,000 daN) * Extendable galvanised platform widenings by approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering from front and rear operable via cable remote control with buttons, with single-track axle alignment, without installation in tractor unit * Cable (approx. 35 mm², approx. 3.5 m long) with connectors (NATO-NATO) between trailer and tractor unit for supplying the electro-hydraulic unit and/or electric winch * 2 additional pairs of bolt-on lashing rings (LC 5,000 daN) * 1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm (L x W x H), straight design, with 2 external side doors and 1 top lid, located behind the front wall

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, suspension: air, tire size: 385/65 R22,5, KRONE SD refrigerated trailer | Carrier 1550 deep-freeze unit | KRONE axles with disc brakes | Toolbox | Spare wheel holder | Temperature recorder | Pallet box | Lifting axle | Double-deck. Subject to errors and prior sale. Iiodpfxexghkhs Ah Uek

Condition: new, empty load weight: 12 kg, maximum load weight: 54,000 kg, overall weight: 66,000 kg, axle configuration: 3 axles, loading space length: 13,150 mm, loading space width: 2,950 mm, loading space height: 950 mm, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2012, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, 1st axle can be lifted, lifting + lowering, ABS (anti-lock braking system), can be extended to 3.50 m, lashing eyes, 2-part loading ramps, hydraulic ramps, twin tires approx. 8500mm loading length over axles, loading length over pins approx. 4650mm, 2-part hydraulic loading ramps 2500mm + 1500mm, can be extended to 3.5 m, rear axle load (kg) 48000 (3x 16,000kg), 18,000kg fifth wheel pressure for 3-semi-trailer tractor, ONLY FOR EXPORT, ONLY FOR EXPORT ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Iiodpfx Aji Rnh Tjh Ujk - .

Condition: used, maximum load weight: 38,440 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available upon request. - Loading area with rear taper approx. 1,000 mm x 8° - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm - JOST landing legs (mechanical) with 2-speed gearbox rated for approx. 24 t lifting capacity (approx. 50 t test load) - BPW axles and suspension, 1 axle self-steering - Technical axle load: 12,000 kg each - Air suspension with raise/lower valve - Topcoat in solid RAL 3002 carmine red - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Electro-hydraulic unit mounted at the rear under the loading area - Load gauge for determining axle loads, including load chart Iiodpfxoxthz To Ah Uek - On the gooseneck: removable ALU side walls and rear wall, approx. 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck - 6 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area - Galvanized extensions, extendable by approx. 230 mm per side - Lift axle on the 1st axle - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - 2 LED reversing lights mounted on the rear plate - HRM metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 51,870 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractors: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * At the front connection strip: yellow-red air couplings Iisdpjxtc Uhefx Ah Usk * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for hydraulic operations * External beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the gooseneck external beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodized version * On the gooseneck, 1 plug-in aluminum rear wall, approx. 400 mm high, anodized version * Approx. 40 mm thick hardwood flooring above the gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear gooseneck mounting for aluminum ramps * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Loading platform, extendable version, length approx. 8,800 mm, rear with chamfer approx. 500 mm x 10° * Recess in the platform and chamfer for accommodating the excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension * 1st and 2nd axle fixed, 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Complete platform and interrupted between the axles with approx. 50 mm thick hardwood flooring (increasing the coefficient of friction) * Platform locking with conically welded locking profiles every approx. 250 mm * Elongated slots for insertable and repositionable bridging elements at the front of the platform * Intermediate table with set-down platform, approx. 300 mm wide, for large cross-section telescopic tube with sheet metal covering – front and rear with elongated slots for insertable and repositionable bridging elements – removable cover flush with the platform * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of flush-mounted lashing rings in the outside frame of the platform, foldable outward (LC 10,000 daN) * Additionally, 1 pair of lashing rings externally on the front cross member of the platform, approx. 90° turned inward towards the platform (LC 10,000 daN) * Extendable galvanized widening extensions by approx. 230 mm per side * 1 pair of permanently installed wheel recesses, open up to the extension, approx. 700 x 410 mm (W x D), sheet-covered in the platform ahead of the 1st axle, wheel recesses with square climbing strips approx. 15 x 15 mm, spaced approx. 200 mm * Between the 2nd and 3rd axles, 1 pair of permanently installed wheel recesses on the platform, approx. 1,695 x 700 x 410 mm (L x W x D), covers for wheel recesses split lengthwise, with wooden overlay, outer plug-in loc

Condition: new, maximum load weight: 37,635 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment features. Complete specifications available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick One-piece steel ramps: * One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position do not count towards the vehicle length Loading area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as extensions in the lower area * Between the first and second axles, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes three-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load 5 t/each * Recess in the inclined area as well as projecting into the loading area to accommodate excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings (horizontal) at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN), 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the loading area to hook in tensioning straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lift/lowering valve * Axle tool kit Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data is transmitted to the tractor via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display this data Braking system: * WABCO brake system in accordance with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24-volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets * Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot-blasted with turbine blasting machine after welding * Second blasting treatment with corundum for optimum coating adhesion * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL system 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray mist test according to ISO 9227-NSS * Cavity sealing with special wax Iedpfxextc Ubj Ah Ujik Including the following extras: * 2-inch kingpin * One