Used lowboy semi-trailers / low loaders for sale (264)

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front Bledpfx Aet Aqv Ssacop * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 73,090 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list; the full specification is available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable * Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 2-Axle Compact Front Bogie: * Hook mounts front and rear. Length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-on/lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 7,150 mm * Beam height: approx. 300 mm * Beam width: approx. 650 mm * Loading height approx. 450 mm, ground clearance approx. 150 mm 4-Axle Rear Bogie: * Mechanical pin/lug coupling for attaching a lowbed at the front * Rear closing cross-member * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm 2-Axle Front Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: approx. 14,640 kg (62 km/h) * Hydraulic axle compensation 4-Axle Rear Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: 14,640 kg (62 km/h) * Hydraulic axle compensation Tyres: * Tyres according to manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Entire steel structure is automatically blast-cleaned after welding using a turbine blasting system * Second round of blasting with corundum for optimal coating adhesion * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) * Final coat with 2 layers of 2-component topcoat, single colour in RAL 3002 Carmine Red, corresponding to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminium side and rear walls for the gooseneck, approx. 400 mm high * 3.5-inch king pin * Truck hydraulic connection with flow regulator (20 l/min), incl. gallows for supply line suspension * The tank of the tractor unit must have a minimum capacity of 80 l * With MAX Trailer couplings; otherwise, couplings to be supplied by the customer ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 Bljdpfexbv Auox Aacjp * Multi-coupling hydraulic connectors on the gooseneck * Front bogie with separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 2-axle bogie with standard grease NLGI-2 * Prepared for receiving bolt-on container positioning for 1 x 20' or 1 x 30' containers on outer beams * Without container locks * Mounts on the outer beams of the loading area for installing folding marker extensions * BEKA-MAX central lubrication for a 4-axle bogie with standard grease NLGI-2 * Rear bogie equipped with a socket for remote cable steering * Rear bogie with trough * One LED beacon with mounts on the left and ri

Condition: used, maximum load weight: 33,525 kg, overall weight: 46,000 kg, axle configuration: > 3 axles, first registration: 04/2008, Year of construction: 2008, Equipment: ABS, Manufacturer Kel-Berg / Faymonville Model 4 akslet 3 m Udtræks Maskintrailer Year 2008 Condition Good Serial Number SKBE58S407KE12547 Ref. nr. 7972 Reg. date: 30-04-2008 Last seen: 27-01-2025 Blodexa Tdmjpfx Aacjp Drum brake: ? ABS: ? Rear axles: SO F Suspension: Air Tire Size: 235/75R17,5 Cover% left 30-50% Toolbox: ? Total weight: 46000 Kg Net weight: 12575 Kg Load capacity 33425 Kg Inside length: 8.75m / 12.10m Extraction: 3 m Forced steering axles: 3+4 Hydraulic ramps: ? Hydraulic rear support leg: ?

Condition: used, empty load weight: 20,000 kg, maximum load weight: 66,000 kg, overall weight: 86,000 kg, axle configuration: > 3 axles, first registration: 12/2013, next inspection (TÜV): 03/2026, loading space length: 10,000 mm, loading space width: 2,550 mm, loading space height: 900 mm, suspension: air, tire size: 245/70R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, air suspension, 6 axles, BPW axles, first axle liftable, forced steering, lift and lower function, ABS (anti-lock braking system), central lubrication system, extendable, extendable to 3m wide, lashing eyes, hydraulic ramps, front supports, rear supports, EBS. Body: Telescopic extension by 7m. Fully extended length 21.25m, bed length 10 to 17m. Storage box on gooseneck: L: 2450mm, W: 2450mm, H: 450mm. Kingpin 3.5 inch, 5 hydraulically and mechanically forced-steered axles, 5 x 10t BPW axles, 2 central lubrication systems, hydraulically adjustable gooseneck, hydraulic pump powered electrically by the tractor unit (hydraulics can also be connected from tractor), radio and cable remote control. Tires between 50% and 80%. ACCESSORY DETAILS WITHOUT GUARANTEE, Subject to change, prior sale and errors excepted! Bsdpoxc Nztefx Aacslp

Condition: used, empty load weight: 23,620 kg, maximum load weight: 73,580 kg, first registration: 05/2009, next inspection (TÜV): 01/2024, total length: 14 mm, total width: 25,500 mm, total height: 9,000 mm, suspension: steel-air, tire size: 245/70 R 17.5 /10mm, wheelbase: 1,300 mm, mileage: 242,697 km, front tire size: 245/70 R 17.5 /10mm, operation weight: 97,200 kg,

Condition: new, maximum load weight: 56,000 kg, overall weight: 68,000 kg, axle configuration: > 3 axles, loading space length: 15,420 mm, loading space width: 3,000 mm, total width: 3,000 mm, total height: 2,850 mm, Equipment: ABS, Extendable low-bed semi-trailer with recesses for tyres, extendable by 3,000 mm to a total length of 19,000 mm. Loading bed dimensions (LxW): 10,915 x 3,000 mm, extendable to 3,500 mm, loading deck height approx. 960 mm; ramp at rear: 650 mm; gooseneck: 2,470 mm + ramp 1,385 mm; steel side walls 400 mm; storage box on gooseneck; floor covering: 65 mm thick hardwood floor and steel floor with tear plate pattern; wheel recesses (LxWxH): 1,100 x 940 x 290 mm, loading height: 610 mm; wheel recess bridge: partial hardwood planks with steel supports to cover recesses; 8 heavy-duty lashing rings per side; 5 stake pockets per side; hydraulic loading ramps (1 pair, split), ramp dimensions (LxW): 3,250 x 860 mm, ramp floor made of 65 mm hardwood; electric hydraulic pump; hydraulic quick-coupling system; support winches; 2 folding supports at rear; extendable warning boards; load pressure gauge; ABS, EBS; "KOC" axle(s); 4th axle is self-steering; drum brake system; air suspension with lift/lowering device; lift axle; LED side marker and rear lights; NATO jump start socket; 2 amber rotating beacons at rear; reversing lights; 2 storage boxes; vehicle may feature advertising decals and/or lettering. Our offer generally does not include new TÜV inspection. Should you require a new TÜV inspection, we would be pleased to provide a quote through our partner workshops! Vehicle may feature advertising decals and/or lettering. Our standard terms and conditions of delivery and payment apply. Bedow Nuqhspfx Aacslp We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! Bedpfxew Ii A Ao Aacslp TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete inventory of vehicles, including units available immediately and at short notice, on our website. Overview of equipment. Full equipment list available on request. Neck (gooseneck): * Hydraulically liftable/lowerable and removable gooseneck, length approx. 3,650 mm * 2 pairs of fold-out lashing rings (LC 5,000 daN) Bsdpfx Aasxbmpljcelp * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front bogie: * Hook pick-up front and rear, length: approx. 2,200 mm * Bogie width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Basic width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear bogie: * Mechanical bolt-lug coupling at the front for mounting a lowbed * Rear crossmember bogie width: approx. 2,850 mm * Bogie length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres: * Front bogie: * 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear bogie tyres: * 16 x manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel construction is automatically blasted with a blasting wheel system after welding. Second blasting with corundum for optimal adhesion of the coating system * Full chassis HRM-metallized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final painting with two coats of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU sidewalls and rear wall, approx. 400 mm high, anodized version, fitted on the gooseneck * 3.5 inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Support gallows for supply lines, tractor unit tank must be at least 80 l * with MAX Trailer couplings, otherwise customer to supply coupling parts ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air screwdriver * BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2 * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in facility (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the outer tube of the excavator deck for bolt-on rings (LC 16,000 daN) * Foldable width extensions with steel covers, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2 * At the rear bogie, a socket for the cable remote control of the steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted left and right on the gooseneck * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the powerpack, start/stop of the diesel engine * Control of the steering, in addition to the cable remote control * One LED work light each left and right at the end plate of the gooseneck with...

Condition: used, maximum load weight: 37,640 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/2014, next inspection (TÜV): 02/2026, loading space length: 9,230 mm, loading space width: 2,550 mm, loading space height: 900 mm, loading space volume: 21 m³, Equipment: ABS, * 2-line air connection * Rear support * Front landing gear * ABS * Lift axle Blsdpfxow Ririj Aacsp * SAF axles ---- Structure: Kaessbohrer LB4E EX-1 KK Lowbed semi-trailer (2,350 mm/Gooseneck + 9,230 mm/Deck), loading height approx. 900 mm, extendable width up to 3,160 mm, extendable in 12 stages to a total length of 19,575 mm / Min. deck length 12,000 mm, max. 18,000 mm., 3rd and 4th axles with trailing steering, loading ramps - ALU. Steel/wood floor, lashing rings, twistlock mounts. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE MUST BE PAID!!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see imprint) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.

Condition: used, maximum load weight: 25,360 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 04/2012, next inspection (TÜV): 06/2026, loading space length: 12,000 mm, loading space width: 2,550 mm, * Schwarzmüller F-Series Low Loader * First registration 2012 * 2 axles * Air suspension * Drum brakes * Central lubrication system * SAF axles * 2nd axle is steered * Aluminium loading ramps * New tires on 2nd axle Bedpfx Aow E Ax Hsacolp * Technical inspection valid until June 2026 * Safety inspection valid until December 2025 * Unladen weight: 6,640 kg * Permissible total weight: 32,000 kg * Dimensions: * Loading length below: 8.0 m at a loading height of 0.90 m * Loading length above: 4.0 m at a loading height of 1.50 m * Loading width: 2.55 m * Overall length: 12.30 m * Total length with 3-axle tractor unit only 16.50 m

Condition: used, empty load weight: 8,681 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2014, suspension: air, tire size: 385/55 R22.5, Equipment: ABS, | Schmitz refrigerated trailer S3B | TK SLXe 400 refrigeration unit | Double deck without beams - beams available on request | Pallet box | Internal width 2.49 m | Internal height 2.69 m | Schmitz axles with disc brakes | Spare wheel holder, toolbox | Diesel hours: 28,394 h | Subject to error, input mistake, and prior sale. Bedpsxdn Hqsfx Aacolp

Condition: new, maximum load weight: 73,000 kg, overall weight: 86,000 kg, axle configuration: > 3 axles, loading space length: 13,035 mm, loading space width: 3,000 mm, total width: 3,000 mm, total height: 4,000 mm, Equipment: ABS, Low-bed trailer, loading bed: (LxW) 8,615 x 3,000 mm, extendable to 3,500 mm, loading height of the bed: approx. 1,160 mm, rear slope: 720 mm, gooseneck: 3,700 mm, steel side walls 400 mm, storage box on gooseneck, flooring: 65 mm thick hardwood floor and steel floor with tear-drop pattern, 7 heavy-duty lashing rings per side, hydraulically side-shiftable loading ramps (LxW) 3,000 x 800 mm, ramp surface made of 65 mm hardwood, electric hydraulic pump, quick-release hydraulic coupling system, landing gears, 2 folding supports at the rear, extendable warning boards, loading gauge, ABS, EBS, "LIDER" axle(s), drum brake system, leaf suspension, LED side markers and taillights, rear beacon, reverse spotlight, 2x toolboxes, 35-liter water tank. Vehicle may have advertising stickers and/or lettering. Our offer generally does not include new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with a quote from our partner workshops! Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We would gladly provide you with a financing or leasing offer for this unit. Bjdow Nuqnepfx Aacolp Please contact us!

Condition: new, maximum load weight: 29,260 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2025, Equipment: ABS, Technical Specifications: Model and Manufacturer * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable low-bed trailer with recessed wheel wells, suitable for transporting vehicles and heavy machinery. Dimensions * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Total width: 2,550 mm (extendable by 600 mm via side extensions) * Fifth wheel height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capacities * Permissible total weight: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tonnes per axle) * Kingpin capacity: 18,000 kg Axle Equipment * Number of axles: 3 (2 fixed front axles, 1 self-steering trailing axle at rear) * Lift axle: Manually controlled, load-dependent (1st axle) * Axle make: BPW axles with drum brakes Tyres and Rims * Tyre size: 245/70 R17.5 * Tyre brand: GOODYEAR * Tyre markings: M+S and 3PMSF certification * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre life * Number of rims: 12 steel rims with ET120 offset Chassis and Suspension * Suspension: Air suspension with load gauge * Brake system: WABCO dual-circuit compressed-air brake system with EBS 4S/3M, ABS, and RSS (roll stability support) Lighting and Electrics * Lighting: 24V, multi-chamber lamps by ASPÖCK, side markers and LED tail lights * Coupling type: Standard yellow/red for air supply connection * Connections: NATO socket with 2 x 50mm² interconnecting cables (3 m length) Ramps * Ramp type: Foldable hydraulic access ramps with sliding mechanism * Capacity: 40 tonnes * Ramp surface: Hardwood * Safety: Ramp securing chain included Load Securing * Lashing rings: - 2 x 2 with 5,000 daN load capacity each - 1 x 2 with 10,000 daN load capacity at the gooseneck - 4 x 2 lashing rings with 6,000 daN capacity in the well area * Container lock fittings: Suitable for the transport of 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features * Gooseneck: With 90° vertical corners, robust and durable Blsdpfx Aeu Tarpsacop * Floor covering: 45 mm hardwood decking and steel floor with embossed pattern * Wheel well bridge: Bridges made from solid hardwood with steel supports to cover the wheel recesses * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours * Chassis: Traffic red (RAL 3020) * Partial metallization of the support surfaces Condition * New and ready for immediate use. * Perfectly suited for heavy transport, as well as for use in construction or machinery relocation.

Condition: new, maximum load weight: 48,010 kg, overall weight: 66,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our entire stock of vehicles, including those available immediately and at short notice, on our website. Extract from the specifications. Full equipment list available upon request. Gooseneck: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractors: 6 x 4 or 8 x 4 Low bed: * Low bed with external beams, extendable design, SUPER LOW design, approx. 7,550 mm long * Low bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking * Supply lines are protected within the extendable beams and automatically adapt to the respective low bed length * 7 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN) * 6 pairs of threaded blocks on the inner beams for mounting bolted RUD rings Rear chassis: * Rear chassis with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at the rear * 2 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN) * 1 pair of lashing rings, lying flat in the recess (approx. LC 10,000 daN) * 2 pairs of lashing rings, lying flat in the recess (approx. LC 16,000 daN) * 2 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm in the outer frame PENDLE AXLE: * PENDLE AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins to secure in the raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tool Tyres: * Tyres 245/70 R 17.5 3PMSF – brand at our discretion * Load index (146/146F) Brake system: * Wabco brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Paintwork: * Entire steel structure automatically blast-cleaned after welding using a shot blasting unit * Second blast treatment with corundum for optimum coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee the best corrosion protection * Final paint finish with 2 coats of 2K topcoat, single-color in RAL 3002 Carmine Red according to RAL system 841GL Including the following accessories: * Preparation for installation of bolted container placements for 1x 20' or 1x 40' container on the external beams * Without container locks * 3.5 inch kingpin * One galvanized steel front wall, approx. 400 mm high * Remote-controlled steering from the front and rear via cable remote with push buttons, with axle tracking control (without installation on the tractor unit) * Electro-hydraulic unit * On the gooseneck, removable aluminum side and rear walls, approx. 2,000 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable (superstructure length approx. 2,120 mm) * Hydraulic connections from the gooseneck to the low bed via multi-coupling instead of screw couplings (no guarantee on seals) * Separate air connection with air gun on gooseneck * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck * 2 pairs of boltable lashing rings M20 (LC 5,000 daN) * 2 pairs of boltable RUD rings VLBG-4 M24 (LC 8,000 daN) * Folding extensions, approx. 230 mm per side, widening planks made of hardwood. The maximum load is distributed on an area of appr Bledpfx Aaoxbmprecop

Condition: used, maximum load weight: 16,300 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2022, next inspection (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800mm, length of loading area 8,350mm, Knorr brake EBS 4s/2k (ASR), folding rear support legs 25,000kg, pneumatic valve for adjusting the N.4 wheel blockers, Electric winch with remote control, 3x2 lashing rings in the platform outer frame (8to), Aluminium frame L: 2,300mm - W: 500mm, hot-dip galvanized, Tool box, Loading platform rollers, Extendable bumper, Ramp bracket Bjdpfx Aoih E Hyoacolp

Condition: used, maximum load weight: 29,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/1999, next inspection (TÜV): 01/2026, * Reisch RPTS 35/24 low-bed semi-trailer * First registration: 1999 * Air suspension * BPW ECO axles * Drum brakes * Container locks Bodpfxowyhx Ie Aacslp * Extensions to 3 m width * Lower deck loading length: 8.40 m * Lower deck loading height: 90 cm * Platform loading length: 4.10 m * Platform loading height: 1.50 m * Steel support for straight loading along the entire length up to 12.50 m

Condition: excellent (used), functionality: fully functional, machine/vehicle number: TP1202302704, first registration: 03/2004, loading space length: 136,550 mm, loading space width: 2,480 mm, loading space height: 3,200 mm, loading space volume: 105 m³, color: yellow, Year of construction: 2004, Equipment: ABS, GERBLINGER low-loader extendable jumbo semi-trailer Brand: GERBLINGER Model: STA Year of manufacture: 2004 First registration: 2004/04/21 The trailer is equipped with a DRAGON WINCH DWT 20000HD: - Pulling capacity: 20,000 lb / 9,072 kg – with block 20 t - Voltage: 24 V - Power: 9 HP - Synthetic rope length: 28 m - Wireless remote control - Wired remote control, 20 m cable External dimensions: - Total length: 13.65 m, extendable chassis - Width: 2.55 m - Height: 4.00 m Internal dimensions: - Length: 13.65 m - Width: 2.48 m - Height: 3.20 m - Height over balcony: 2.90 m - Balcony length: 3.95 m Bodpswra H Usfx Aacjlp - Extendable side posts, 45 cm on each side - Hydraulically lifting roof by 37 cm - Capacity: 33 Euro pallets - Loading height: 90 cm - Floor recesses: 8 cm Possibility of rear, side, and top loading - Sliding roof, hydraulically liftable - Curtain-sided tarpaulins - Fully wooden deck - Rear of trailer can be opened on the right or left side using side curtains - ABS - Drum brakes - Adjustable suspension - Lifting first axle - Steering third axle - Aluminium ramps, 2.90 m long, capacity 26 t - Spare wheels x2 - Tool boxes - Rear landing legs - Load securing equipment (9 sets of chains) - 2x pulley blocks - BPW axles - Michelin tyres 205/65 R17.5 We provide: - Vehicle servicing after purchase - Maintenance repairs of equipment purchased from us - Worldwide transport Upon request we offer: - Oil and filter changes for the vehicle - Oil and filter changes for the superstructure Additional service: As a market leader in Central Europe specializing in the sale of municipal vehicles and equipment, we kindly offer you the benefit of our extensive experience in this field, including organizing the sale of your redundant municipal equipment through us. On your behalf, we will: - Communicate with customers in multiple foreign languages - Prepare sales and post-sales documentation - Organize road and sea transport - Handle customs documentation (customs clearance, Eur 1, T1) - Prepare the vehicle for sale Possibility of leasing older vehicles, even up to 18 years old. If you would like more details, please contact us.

Condition: used, empty load weight: 8,943 kg, maximum load weight: 27,057 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2017, total width: 4,000 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schmitz refrigerated semi-trailer SKO24 | Double-deck | Schmitz axles with disc brakes | Toolbox, pallet box | Tyres: 385/65 R22.5 | good condition | Electrical connection | Temperature recorder, double-deck beams | Spare wheel holder | Carrier 1550 refrigeration unit with 18,068 h | Subject to errors, input mistakes and prior sale. Blsdpfsxc Ub Eex Aacep

Condition: new, maximum load weight: 45,820 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our entire inventory of immediately and short-term available vehicles on our website. Excerpt from the features. Complete list of features available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) Bedpfxsxbmpfe Aacelp * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear bevel approx. 1,000 mm x 8° * 5 pairs of folding lashing rings on the outside (LC 5,000 daN) * 3 pairs of folding lashing rings on the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with checker plate Axles: * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tires: * 245/70 R 17.5 3PMSF tires, load index (146/146 F) * Brand of our choice * TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit is via standardized EBS interface per ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Landing legs: * JOST landing legs (mechanical), 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco braking system in accordance with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Paintwork: * Complete steel construction is automatically blasted after welding by shot blast machine * Second blasting with corundum for optimal coating adhesion * Final paintwork: 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red per RAL system 841GL * Rims in silver gray * Rear panel metallized and painted in RAL 9010 (pure white) * No metallic paint available * Paint system tested by salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash in sync with the indicators * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. * 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings * Electro-hydraulic unit * Remote steering control, operated from both front and rear via cable remote with push buttons, with single-track axle control (without installation in the tractor unit) * Galvanized folding supports under the rear ramp of the loading platform * 1 pair of recessed lashing rings along the main longitudinal beam at the rear ramp (LC 10,000 daN) * On the gooseneck, removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H) * The rear galvanized socket stakes are removable. (Upper body length approx. 2,560 mm) * 1 galvanized toolbox, integrated into the sloped gooseneck * 3 pairs of WADER container pockets in the loading platform for one 20' (30?) or one

Condition: new, maximum load weight: 33,750 kg, overall weight: 47,000 kg, axle configuration: 2 axles, Equipment: ABS, Further vehicles available at Excerpt from the equipment. Complete equipment details available on request. Gooseneck: Gooseneck in SNT design for optimization of loading platform length, approx. length 3,750 mm. Gooseneck hydraulically liftable/lowerable as well as detachable. Technical fifth-wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2 and 6 x 4 Lowbed: Lowbed with external beams in extendable SUPER LOW design, approx. length 6,850 mm. Lowbed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking system. The supply lines are protected within the extendable beams and automatically adjust to the respective lowbed length. 5 pairs of lashing rings foldable outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear running gear: Rear running gear with closed outer frame, tread plate covering and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings foldable outwards (LC 10,000 daN). 1 pair of lashing rings horizontal in the recess LC 16,000 daN. 1 pair of lashing rings horizontal in the recess LC 10,600 daN. 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame. PENDLE-AXLE: PENDLE-AXLE, all axles hydro-mechanically forced steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinder with shut-off valves and locking pins to secure in the raised position. Final painting of the axles with 2 coats of 2K paint in solid FAY-Grey-34-0260. Technical axle load: 12,000 kg each Hydraulic axle compensation. Axle tools. Tyres: Tyres 245/70 R 17.5 3PMSF – tyre make at our discretion. Load index (146/146F) TPMS: TPMS tyre pressure monitoring system per ECE R 141. Brake system: Wabco brake system conforming to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). All LED side marker lights flash together with the indicator. ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel structure made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (Yield strength 355MPa) S690QL/S700MC (Yield strength 690MPa) Painting: Complete steel structure is automatically shot-blasted by turbine system after welding. Second blasting with corundum for optimal adhesion of coating system. HRM metallizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection. Final coat with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red in accordance with RAL system 841GL. Including the following additional equipment: - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high. - Remote steering from front and rear via cable remote control with push buttons, axle single-track monitoring (without installation in tractor unit) - Electro-hydraulic aggregate. (± 45kg) 2 pairs of bolted container locks on the external beams. Including 2 pairs of container locks for either 1x 20' or 1x 40' container On the gooseneck, aluminum sidewalls and rear panel, removable, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Body lengt Bodpfjxbmn Usx Aacolp

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, Equipment: ABS, More vehicles available at Extract from the equipment features. Complete equipment list upon request. GOOSENECK Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10°. For tractor units: 4x2, 6x2, and 6x4. - Removable steel bulkhead, approx. 400 mm high - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power unit for controlling hydraulic operations, except for hydraulic winches - Outer longitudinal beams of the gooseneck with mounting holes for bolted lashing rings. The first hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN). - 1 pair of flat lashing rings at the rear section of the gooseneck (LC 10,000 daN). - On the gooseneck: 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish. - On the gooseneck: 1 detachable ALU rear wall, approx. 400 mm high, anodized finish. - Over the gooseneck: approx. 40 mm thick hardwood flooring, checker plate over the kingpin. - 3.5 inch kingpin - Gooseneck guiding plate for the fifth wheel, approx. 500 mm wide. - Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) - 2 pairs of lashing rings with retaining springs hanging on the outer beams of the gooseneck (LC 5,000 daN). LOAD PLATFORM Extendable load platform, approx. 8,800 mm in length with rear bevel approx. 500 mm x 10°. Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines protected inside the extendable supports and automatically adapt to the current platform length. - BPW axles and suspension, 1st axle steerable, all other axles hydro-mechanical forced steering. 1st axle with electro-magnetic reversing lock, activated by reverse gear and manually. Technical axle load: 12,000 kg each. Air suspension with raising and lowering valve. - 235/75 R 17.5 3PMSF twin tires - Brand of our choice - Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = 50,000 kg - Continuous and between the axles interrupted approx. 50 mm thick hardwood flooring on the load platform (for increased friction coefficient). - Oblong holes for attachable and repositionable bridging elements: - In the front of the platform - 1 sliding intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. - Front and rear with oblong holes for attachable and repositionable bridging elements. - 1 pair of lashing rings on the front cross member (LC 10,000 daN). - 7 pairs of recessed lashing rings in the outer frame of the platform, tiltable outwards (LC 10,000 daN). - Extensions (galvanized) extendable by approx. 230 mm per side (without timber planks). - 1 pair of mechanical rear supports. - Remote steering control from front and rear by cable remote, with single-track axle monitoring, no installation required on the tractor unit. - TPMS tire pressure monitoring sensors installed on all wheels - Platform locking with conically welded locking profiles every 500 mm. - Lock monitoring left and right at the semi-trailer. - For the intermediate table, approx. 300 mm wide, a mechanical lock for securing the table in the extension. - 5 pairs of threaded blocks on the extendable support for mounting bolt-on M20 rings (LC 5,000 daN). B Blodpfx Aaexarmaocjp

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and soon available vehicles, on our website. Partial equipment list. Full specification available upon request. Loading Platform: Bsdpfx Aaexarl Nocelp * Low bed with external beams, extendable SUPER LOW design, length approx. 6,850 mm * Low bed with fixed hardwood flooring, about 40 mm thick, with mechanical locking system * Service lines are protected within the extendable beams and automatically adjust to the corresponding low bed length * 5 pairs of lashing rings, foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: * Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm * Gooseneck hydraulically liftable/lowerable and detachable * Technical fifth-wheel load: 23,000 kg * For tractor units: 4 x 2, 6 x 2 Rear Chassis: * Rear chassis in short version with closed outer frame and checker plate cover * Chassis equipped with excavator trough, closed in the rear half to house air tanks * 2 pairs of lashing rings, foldable outward (LC 5,000 daN) * 1 pair of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, flat-mounted, on the front & rear of the chassis (LC 10,000 daN) Axles: * BPW axles, hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF * Manufacturer of our choice * Load index (146/146F) * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the truck via standardized EBS interface according to ISO 11992 * For correct display, the truck must be capable of transmitting and displaying this data Braking System: * Braking system compliant with EU regulations, with EBS-E (2S2M) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection rail with sockets 24N, 24S & 15-pin, compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Coating: * Complete steel structure automatically shot-blasted after welding using a Grit Wheel System * Second blasting with corundum for optimal coating adhesion * HRM metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating with two layers of 2K topcoat, solid color in RAL 3002 carmine red as per RAL system 841GL * Wheels in silver * Rear section metalized and coated in RAL 9010 (pure white) * Metallic paint not possible * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Remote steering from front and rear via cable remote control with push-buttons, with single-track control of axles (without installation on tractor unit) * Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 40' container on the...

Condition: new, maximum load weight: 39,670 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with hardwood flooring approx. 30 mm thick * Rear of gooseneck in straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Drum brakes * Axle tool kit Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via the standardised EBS interface as per ISO 11992 Blsdpfxoxarlve Aacjp * For correct display, the tractor unit must be able to transmit and display these data Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically blasted after welding using a shot blast system * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 x 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL * Wheels in silver * Rear section metallised and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested with salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Electrical System: * Electrical system in compliance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights blink together with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings at the galvanised connection strip up front * Galvanised folding supports beneath the loading area bevel * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, plug-in aluminium side and rear boards, approx. 2,440 x 400 mm (L x H) * The rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support bracket with 1 pair of WADER container locks. Fifth-wheel load approx. 20,000 kg * 7 pairs of WADER container locks for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container on the gooseneck, 2x 20' container * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area * One galvanised bracket running across under...

Condition: used, maximum load weight: 42,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 06/2006, next inspection (TÜV): 02/2026, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specification available on request. - BPW axles with drum brakes, air suspension, with lift and lowering valve - Interchangeable 3.5-inch kingpin - Extendable loading area with semi-automatic, pneumatically operated locking system - Loading platform hydraulically liftable and lowerable - 2 foldable, two-part loading ramps (approx. 2,950 + 1,650 x 850 mm) with hardwood covering - Wabco brake system ABS/EBS - Fixed steel front wall, slanted design, approx. 400 mm high - Chassis with continuous recess (excavator trough, approx. 950 x 250/330 mm), for accommodating the excavator arm - Rear cross member closed - Gooseneck hydraulically liftable and lowerable, approx. mm Bjdpfxsxagghe Aacelp For sale on behalf of the customer

Condition: new, maximum load weight: 40,790 kg, overall weight: 59,000 kg, axle configuration: 3 axles, total width: 2,750 mm, Equipment: ABS, Our complete vehicle inventory with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment details. Full equipment list available on request. Gooseneck: Bljdew Tprbepfx Aacjp - Gooseneck in SNT design for optimization of the load platform length, approx. length 3,700 mm - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6 x 4 or 8 x 4 Low-bed: - Low-bed with external beams, extendable design, SUPER LOW concept, length approx. 7,550 mm - Low-bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines routed within the extendable beams, automatically adapting to the respective low-bed length - 7 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolt-on RUD rings Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at the back - 2 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN) - 1 pair of flat-mounted lashing rings in the recess (approx. LC 10,000 daN) - 2 pairs of flat-mounted lashing rings in the recess (approx. LC 16,000 daN) - 2 pairs of stake pockets for plug-in posts approx. 100 x 50 mm in the outer frame PENDULAR AXLE: - PENDULAR AXLE, all axles hydraulically and mechanically forced-steered - Hose rupture valve on the axle equalization cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position - Final painting of axles with 2 coats of 2-component paint, single-color in Grey-34-0260 - Technical axle load: 12,000 kg each - Hydraulic axle compensation - Axle tools Tyres: - Tyres 245/70 R 17.5 3PMSF, brand at our discretion. Load index (146/146F) Braking System: - Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical System: - Electrical system according to EU regulations - Lighting 24 V ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Coating: - Complete steel structure automatically blast-cleaned after welding using a shot blasting system - Second abrasive blasting with corundum for optimum bonding of the coating system - Final painting with 2 coats of 2K topcoat, single-color in RAL 3002 Carmine Red according to RAL System 841GL - Rear section metallized and painted in RAL 9010 (Pure White) - Rims in silver grey - No metallic paint available - Paint system tested in salt spray fog test in accordance with ISO 9227-NSS - Cavity sealing with special wax Accessories included: - Prepared for the mounting of bolt-on container positioning devices for 1x 20' or 1x 40' container on the outer beams - Without container locks - 3.5 inch king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel carrier in front of the front wall - On the galvanized connection strip at the front, yellow-red air couplings - Remote axle steering from front and rear, cable remote control via push buttons, with single-track control (no installation in tractor unit) - Electro-hydraulic power unit - On the gooseneck: plug-in alumini