Used lowboy semi-trailers / low loaders for sale (211)

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete inventory of vehicles, including units available immediately and at short notice, on our website. Overview of equipment. Full equipment list available on request. Neck (gooseneck): * Hydraulically liftable/lowerable and removable gooseneck, length approx. 3,650 mm * 2 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front bogie: * Hook pick-up front and rear, length: approx. 2,200 mm * Bogie width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Basic width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear bogie: * Mechanical bolt-lug coupling at the front for mounting a lowbed Bsdpfxexbmplj Aaaelf * Rear crossmember bogie width: approx. 2,850 mm * Bogie length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres: * Front bogie: * 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear bogie tyres: * 16 x manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel construction is automatically blasted with a blasting wheel system after welding. Second blasting with corundum for optimal adhesion of the coating system * Full chassis HRM-metallized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final painting with two coats of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU sidewalls and rear wall, approx. 400 mm high, anodized version, fitted on the gooseneck * 3.5 inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Support gallows for supply lines, tractor unit tank must be at least 80 l * with MAX Trailer couplings, otherwise customer to supply coupling parts ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air screwdriver * BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2 * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in facility (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the outer tube of the excavator deck for bolt-on rings (LC 16,000 daN) * Foldable width extensions with steel covers, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2 * At the rear bogie, a socket for the cable remote control of the steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted left and right on the gooseneck * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the powerpack, start/stop of the diesel engine * Control of the steering, in addition to the cable remote control * One LED work light each left and right at the end plate of the gooseneck with...

Condition: new, maximum load weight: 91,640 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Full specification available upon request. Gooseneck * Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook couplings front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and a bolt coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Main beam height: approx. 430 mm, Main beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical bolt coupling for front connection of a low-bed, rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position * Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation * Front bogie tyres: 12 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position * Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation * Rear bogie tyres: 20 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork Bjdpfeuvbdtox Aaaolf * HRM metallization of the entire vehicle chassis using ZINACOR 850 (85% zinc/15% aluminium) to ensure the best possible corrosion protection * Final coat with two layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL System 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU side walls and rear wall approx. 400 mm high in anodized finish, mountable on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication system for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication system for one 3-axle bogie * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the external tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm * Steel mattresses can be positioned in 2 ways to achieve a lowered loading platform. Load capacity depends on extension, refer to the respective load chart * Steel mattresses with rubber flooring approx. 12 mm thick * One 7-pin socket left and right, front and rear of the rear bogie for warning signs * BEKA-MAX central lubrication system for one 5-axle bogie * Socket on the rear bogie for cable remote control of rear steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the goos

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: Bodpfx Ajw Tpq Dsaaolf - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, maximum load weight: 37,635 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment features. Complete specifications available on request. Gooseneck: Blsdpfoxtc Ubjx Aaajf * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick One-piece steel ramps: * One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position do not count towards the vehicle length Loading area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as extensions in the lower area * Between the first and second axles, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes three-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load 5 t/each * Recess in the inclined area as well as projecting into the loading area to accommodate excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings (horizontal) at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN), 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the loading area to hook in tensioning straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lift/lowering valve * Axle tool kit Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data is transmitted to the tractor via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display this data Braking system: * WABCO brake system in accordance with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24-volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets * Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot-blasted with turbine blasting machine after welding * Second blasting treatment with corundum for optimum coating adhesion * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL system 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray mist test according to ISO 9227-NSS * Cavity sealing with special wax Including the following extras: * 2-inch kingpin * One

Condition: used, maximum load weight: 51,870 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractors: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * At the front connection strip: yellow-red air couplings * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for hydraulic operations * External beams of the gooseneck with mounting holes for bolted lashing rings * One mounting hole at the rear upper part of the gooseneck external beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodized version * On the gooseneck, 1 plug-in aluminum rear wall, approx. 400 mm high, anodized version * Approx. 40 mm thick hardwood flooring above the gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear gooseneck mounting for aluminum ramps * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Loading platform, extendable version, length approx. 8,800 mm, rear with chamfer approx. 500 mm x 10° * Recess in the platform and chamfer for accommodating the excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension * 1st and 2nd axle fixed, 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Complete platform and interrupted between the axles with approx. 50 mm thick hardwood flooring (increasing the coefficient of friction) * Platform locking with conically welded locking profiles every approx. 250 mm * Elongated slots for insertable and repositionable bridging elements at the front of the platform Bodpfjxtc Uhox Aaaslf * Intermediate table with set-down platform, approx. 300 mm wide, for large cross-section telescopic tube with sheet metal covering – front and rear with elongated slots for insertable and repositionable bridging elements – removable cover flush with the platform * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of flush-mounted lashing rings in the outside frame of the platform, foldable outward (LC 10,000 daN) * Additionally, 1 pair of lashing rings externally on the front cross member of the platform, approx. 90° turned inward towards the platform (LC 10,000 daN) * Extendable galvanized widening extensions by approx. 230 mm per side * 1 pair of permanently installed wheel recesses, open up to the extension, approx. 700 x 410 mm (W x D), sheet-covered in the platform ahead of the 1st axle, wheel recesses with square climbing strips approx. 15 x 15 mm, spaced approx. 200 mm * Between the 2nd and 3rd axles, 1 pair of permanently installed wheel recesses on the platform, approx. 1,695 x 700 x 410 mm (L x W x D), covers for wheel recesses split lengthwise, with wooden overlay, outer plug-in loc

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high Bledpfx Aetx Nwnsaaof * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: new, maximum load weight: 37,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Excerpt from the equipment specification. Full equipment details available upon request. Chassis, cranked: * Special steel frame made from high-strength fine-grained steels, electrically welded at junctions * Well-dimensioned outer frame * 3-axle arrangement * Spray suppression over the wheels * All steel parts shot-blasted * Side underrun protection made from anodized aluminium, mounted * Increased point load approx. 30,000 kg over approx. 5,000 mm * Custom design in the cranked section — for maximum low-bed length in conjunction with AluLeg landing gear * Drop supports instead of telescopic landing gear, maximum rear overhang radius for the tractor unit: 2,100 mm Special body with extendable rear stanchions: * DINKEL – special superstructure * Self-supporting aluminium roof rail/profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps Bedpfx Aaowx Dcmjajlf * Rear stanchions extendable up to approx. 4,200 mm (for loading/unloading only) * Three sliding stanchions per side with tension-relief springs * Additional central stanchion locks in the roof rail and parking position, operated by pull-cable and spring latch * DINKEL – mechanically adjustable lifting roof * Lifting roof height approx. 400 mm, operable from both or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments, via height adjustment in the stanchions * Front panel overhang for driving under tarpaulin up to a total height of 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on each side, bottom: 450 pockets, above: 4 rows of single pockets * In high-bed only 3 rows of insert slats, even spacing between them Floor: * Approx. 27 mm special waterproof bonded beech plywood, anti-slip surface * Steel plating in wheel arch area, forklift-suitable to DIN standard * Outer frame with flush surface Brakes: * WABCO compressed-air brake system with EBS according to EC Directive 71/320 EEC, including PREV (park-release safety valve). Spring brake cylinders as parking brake * WABCO Smart Board with odometer and axle load display * Including WABCO tire pressure monitoring Axles: * 3 x 10,000 kg SAF axles with drum brakes, low-loader design * Air suspension with raise/lower device, total stroke approx. 230 mm * Third axle is a friction-steered trailing axle with electric and mechanical lock Twin tires: * 235/75 R 17.5, 12-ply premium brand of our choice, including spare wheel holder Lighting: * According to EC standards incl. LED side markers * Position lamps in LED version * 2 additional reversing lights * 2 work lights inside the front bulkhead, top Paintwork: * Chassis with body in RAL color (RAL 3002) * Center stanchions and axles KTL-coated black * Corner stanchions in hot-dip galvanized finish * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body in single-tone RAL color Included special equipment: * Air suspension in ECAS version, operated on the semi-trailer * Center stanchions with additional roof rail locks, operated from below via pull-cable * Additional external unlocking for sliding roof frame * 4 stanchion adapters for special outer frame profile, freely positionable locking of center stanchions * PVC sliding tarpaulin, color SILVER similar to RAL 9006, for overwidth and overheight, flat hooks, tarpaulin folds, locks with pawl/OCS * Roof tarpaulin trans

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit Bljdpew Tprzefx Aaajf * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: new, maximum load weight: 37,680 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment features. Complete specification available on request. Gooseneck * With approximately 30 mm thick hardwood flooring. Gooseneck with straight rear section * 3 pairs of lashing rings (LC 5,000 daN) Loading Area * Extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, treadplate covering above the axles Landing Gear * JOST mechanical landing gear with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single colour RAL 3002 carmine red * Rims in silver Accessories Included * 2" king pin * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings on galvanised front connection strip * 4 chocks with holder on the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic unit * Steering from the front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * European reflective signs (red-yellow) at the rear of the trailer * Yellow reflective tape according to EU regulations on sides, extensions, and rear of the trailer * Bracket for warning signs including socket, left and right on the gooseneck and rear plate * Bracket for rotating beacon at the rear of the trailer Bjdpov Etx Eefx Aaajlf * Galvanised foldable support legs under the loading area's chamfer * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the loading area, 1x 40' container over the gooseneck, or 2x 20' containers * Support block with 1 pair of WADER container pockets, fifth wheel load approx. 20,000 kg * 7 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the loading area * Galvanised, extendable width extensions, approx. 230 mm per side * Sliding hook-in rails for aluminium loading ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the loading area (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic reversing warning signal * HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Bedpfx Aaou Sd U Usaslf Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: used, maximum load weight: 26,827 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 16,240 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer KSLA RJ Mega Jumbo Low Loader with Wheel Wells and Excavator Boom Recess Hardly Used Immediately Available Including Winch TECHNICAL SPECIFICATIONS: * Fifth wheel height (H5): approx. 950 mm * Rear swinging door: 2,300 mm * Overall length (L): 13,190 mm * Gooseneck length (Gl): 3,950 mm * Platform length (Pl): 9,240 mm * Extension (Pe): 3,500 mm * Locking position: 500 mm * Platform height (Ph): 770 mm * Wheelbase (Wb): 7,800 mm * Axle spacing (A): 2,260 mm * Axle load: 24,000 kg * Axles: 12 tons technical load capacity (10 tons permissible load capacity) BPW * Axles with drum brakes * Axle load: 8 tons load capacity * King pin capacity: approx. 15,000 kg * Unladen weight ±3%: 12,173 kg * Overall width (W): 2,550 mm + 600 mm (with extendable sides) * Sliding platform: Not included * Total weight (at 80 km/h): 39,000 kg * Total weight (at 60 km/h): 42,900 kg RUNNING GEAR: * Number of axles: 3 * Steering type: 2 x rigid axles at the front, 1 x trailing axle at the rear * Lift axle: Overload-dependent manual axle lift system on the 1st axle * Lift axle control: Manual * Wabco braking system * Tyres: 12 x 205/65 R17.5 * 1 x spare wheel holder on front bulkhead * Air suspension, 1 x load gauge indicating pressure at the axle assembly * NATO socket CHASSIS: * S700 MC * Gooseneck with 90° vertical corners * 45 mm hardwood floor and steel floor with embossed pattern above the wheel wells only * Galvanized extensions 8 x 2 for enlarging the platform width up to 300 mm * Jost landing gear, 50 tons * Foldable rear supports, 45 tons * 2 pairs of wheel wells for transporting wheeled vehicles * Wheel well bridge for covering the wells RAMPS: * Ramp loading capacity: approx. 40 tons * Suitable for hydraulic folding and adjustment * Wooden floor, 40 mm thick, 3,070 mm long, 850 mm wide, 3,715 mm high (closed), ramp angle 14°, capacity 40 tons * Rear ramp safety: Ramp protection chain included LOAD SECURING: * Lashing rings: 2 x 2 x 5,000 daN capacity, 1 x 2 x 10,000 daN capacity rings on gooseneck; 3 x 2 x 5,000 daN, 4 x 2 x 10,000 daN rings on the outer platform; 2 x 2 rings with 8,000 daN capacity under the outer frame; 4 x 2 rings with 6,000 daN capacity at the tray area included * Stake pockets: 5 x 2 stake pockets (52 x 102 mm) * 6 x container lock housings and 4 x twistlock container locks for transporting 1 x 20FT or 1 x 30FT containers * Gooseneck panels: 1 x steel front plate (450 mm x 2,550 mm), 2 x aluminum side panels (360 mm x 1,500 mm), 1 x aluminum rear panel (360 mm x 2,550 mm) * Plug-in stakes: 8 x 2 units, 50 mm x 100 mm ACCESSORIES: * 1 x PVC-coated steel toolbox (single lid) 750 x 400 x 360 mm (H x D x W) Bodexy Ddkjpfx Aaaslf * 1 x rotating beacon * 1 x work light on underrun guard * Oversize boards with LED lighting 2 x 2 units, 423 mm x 423 mm * Storage box on gooseneck (600 mm x 830 mm x 2,310 mm) * Timber planks for oversize transport * Chassis color: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Condition: used, empty load weight: 28,700 kg, overall weight: 98,000 kg, axle configuration: > 3 axles, first registration: 07/2009, next inspection (TÜV): 05/2026, tire size: 285/70 R19,5, color: yellow, Equipment: ABS, Hydraulically liftable and lowerable gooseneck • Ball bearing turntable-mounted fifth wheel plate, 3 1/2" kingpin and adjustable steering wedge • Built-in hydromechanical double steering for steering pendle axles (dual-circuit steering, 4 hydraulic cylinders) • Hydraulic lift and lower function, hydraulic differential lock • Hydraulic connection for tractor unit Shaped loading platform (approx. 3,600 x 2,480 mm) with checker plate covering and chamfered front corners • Designed for a technical fifth-wheel load up to 30 t Steering radius approx. 2,500 mm Controls for hydraulic functions located on the left in the direction of travel, incl. folding protective cover Gooseneck mounted directly onto the chassis for the shortest possible construction length and rigidly welded in place GOLDHOFER 2-axle running gear with THP/ET special axles permanently fixed to the hydraulic gooseneck two single-tire pendle axle units with hydraulic axle compensation with a total of 4 wheels per axle line Tyre size 285/70 R 19.5 150/147 J TL Chassis width 2,750 mm, wheelbase 1,360 mm Bjdpfx Aaex Srageaslf Technical axle load per axle line max. 14 t (at 70 km/h) Maximum steering angle of the pendle axles approx. 70 degrees Loading height at mid position 1,240 mm (loaded) Hydraulic axle lift ±300 mm Dual-circuit hydromechanical steering system Two-line full-air brake system with spring-loaded parking brake, ALB brake and automatic slack adjusters (AGS) ABS brake (anti-lock braking system, Wabco make) Hose burst safety valves on all axles Hydropneumatic gas storage suspension can be deactivated when loaded Rear frame-integrated adapter element in a short and narrow compact design for connecting between chassis and flatbed deck Errors excepted

Condition: used, empty load weight: 6,560 kg, maximum load weight: 18,440 kg, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,540 mm, loading space height: 850 mm, wheelbase: 7,500 mm, color: blue, gearing type: other, driver cabin: other, Equipment: ABS, additional headlights, compressed air brake, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: Length 13,700 mm x Width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminum ramps, 3,000 x 400 mm, laterally movable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums * Wheelbase 7,500 mm + 1,250 mm * Gross vehicle weight possible: 27,200 kg * Unladen weight: 6,560 kg Bedpfx Aasxu Nnweaolf * Payload possible: 20,640 kg If a new general inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new general inspection (TÜV), without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. Buyers are required to independently satisfy themselves as to the condition and specification of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, empty load weight: 9,600 kg, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 860 mm, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st hand * Condition, see photos * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m * Loading height 0.85 m * SKF axles * 2 supports * Steerable trailing axle * Leaf/air suspension with lift/lower function * DIN heavy-duty lashing rings * EBS Bjdpfx Ajwxm Ileaaelf * ABS (Anti-lock Braking System) * Tool box * Twin tires * Permissible total weight up to 48,000 kg * Unladen weight 9,600 kg * Payload 38,400 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote via our partner workshops. Our offer generally does NOT include new TÜV certification, new DGUV, new SP, or new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 consisting of: Bljdpfswlip Eox Aaajf - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Available immediately. Subject to errors and prior sale.

Condition: used, maximum load weight: 39,550 kg, overall weight: 54,000 kg, axle configuration: 3 axles, first registration: 03/2007, next inspection (TÜV): 08/2024, total width: 2,750 mm, Year of construction: 2007, Equipment: ABS, Manufacturer: Goldhofer Type: STZ-VL3-39/80 Year of construction: 2007 Unladen weight: 14.450kg Bedpewlip Ssfx Aaajlf Payload: 39,550kg Axles: 3x BPW (forced steering, air suspension) Tires: Continental HTR 2 (245/70 R 17.5) Length: 16,000mm Width: 2,750mm ? 3.250mm Gooseneck: Inside: 2,600mm x 2,500mm plus storage compartment Lashing points: 4 Drop deck: 7,500mm x 2,750mm Lashing points: 6 Plateau: 4,100mm x 2,750mm Lashing points: 4 Subject to errors and prior sale.

Condition: used, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 04/2023, next inspection (TÜV): 05/2026, Year of construction: 2023, Equipment: ABS, * Fliegl SDS 470 low-loader * First registration: 04-2023 * Hydraulic lifting bed * 9-ton winch with remote control * Hydraulic double ramps * Last axle is force-steered * SAF axles Blsdpfx Ajyq A Uqjaajf * Curb weight: 11,800 kg * Gross weight: 41,000 kg * More pictures and videos via Whatsapp * Information subject to change and prior sale.

Condition: used, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 07/2002, loading space length: 11,900 mm, loading space width: 2,450 mm, loading space height: 3,150 mm, Equipment: ABS, * Vehicle has French papers * Floor adjustable with radio/remote control * Folding ramps with radio/remote control * Edscha soft top currently removed Blsdpfx Aasv Tgv Toajf As viewed or offered, without further services / accessories. Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply. We support you with export, preparation of export documents, procurement of license plates, supplier's declaration, etc.! The information provided in advertisements, the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed characteristics. The seller accepts no liability/warranty for typing and data transmission errors. Listed equipment must be checked separately if necessary. Subject to errors and prior sale.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, tire size: 385/65 R22,5, KRONE Cool Liner 3-axle refrigerated semi-trailer SDR 27 eL4-DS, Krone axles, 1st axle is a lift axle, LED rear lights, 2 roll-compression buffers (4 rollers per side), pallet box for 36 pallets, toolbox, Duoplex floor, body internal length: 13,311 mm, body internal width: 2,490 mm (=flower width), internal height: 2,630 mm, 1 row of slotted hole lashing rails at 780 mm, double-deck preparation (without beams), refrigeration unit Thermo King SLX i 300-50 diesel/electric. Sale exclusively to commercial customers, excluding any warranty. Errors and prior sale excepted. Bljdpfx Aajx Sql Uoajf

Condition: used, empty load weight: 16,200 kg, maximum load weight: 52,400 kg, overall weight: 68,600 kg, axle configuration: > 3 axles, first registration: 06/1979, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total height: 131,000 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-piece drive-on ramps, front support, twin tires. Body: 750mm ramp width, fifth wheel height 1550mm, kingpin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, total length 13,100mm. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Bsdpfewh Uipex Aaaolf

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, total height: 142,000 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. Blsdpfxsxwa Uyj Aaasf All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: new, empty load weight: 12 kg, maximum load weight: 54,000 kg, overall weight: 66,000 kg, axle configuration: 3 axles, loading space length: 13,150 mm, loading space width: 2,950 mm, loading space height: 950 mm, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2012, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, 1st axle can be lifted, lifting + lowering, ABS (anti-lock braking system), can be extended to 3.50 m, lashing eyes, 2-part loading ramps, hydraulic ramps, twin tires Blsdpfxei Rnh Ts Aaaef approx. 8500mm loading length over axles, loading length over pins approx. 4650mm, 2-part hydraulic loading ramps 2500mm + 1500mm, can be extended to 3.5 m, rear axle load (kg) 48000 (3x 16,000kg), 18,000kg fifth wheel pressure for 3-semi-trailer tractor, ONLY FOR EXPORT, ONLY FOR EXPORT ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 2,750 mm, total width: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3-axle, BPW axles, air suspension, forced steering, lifting+lowering, lashing eyes, 2-section ramps, hydr. ramps Superstructure: hydr. liftable low bed, hydr. ramps Trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR and much more, and was then no longer in use Widenable from 2750mm to 3250mm, loading length in drop deck=5850mm, loading length over axles=4250mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over the axles approx.: 940 mm. 1/3 of the low bed can be raised hydraulically! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bsdsi Rqi Sepfx Aaajlf - .

Condition: used, empty load weight: 7,660 kg, maximum load weight: 33,840 kg, overall weight: 41,500 kg, axle configuration: 3 axles, first registration: 02/2001, loading space length: 12,800 mm, loading space width: 2,520 mm, loading space height: 920 mm, total length: 2,550 mm, total width: 2,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, SAF axles, air suspension, 1st axle liftable, last axle self-steering, lifting+lowering, ABS (anti-lock braking system), lashing eyes, supports, twin tires, storage box Semi-mounted height 1350 mm, loading height 920 mm, loading length over axles approx. 8700 mm, loading length over pins approx. 4000 mm, offset height approx. 625 mm, device for rotating beacon, 800 mm drop sides can be folded down, 6 pairs of lashing brackets in the low bed outer frame, 6 x twist lock on the loading area, warning signs front and rear extendable to 3500 mm, semitrailer front dimension from bulkhead to kingpin 1750 mm, approx. 3,000 EUR invested in maintenance! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bodpfxswcpcgo Aaaolf - .

Condition: used, overall weight: 6,200 kg, first registration: 01/2005, Year of construction: 2005, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body Body: Aluminum wheel wells, floor length 1,800 mm per well, load capacity 6,200 kg, package price ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bedpfxsi Rqirs Aaaolf - .