Rivet header

Carlo Salvi RF/635/SV

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20L/9019, Offer Number: M20L/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm cutting length: 87 mm output pieces/min: 360 Bledpox Edtcefx Apvei Location: In our warehouse

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Progressive Press SACMA SP260 5 Dies – Like new – Perfect working condition Available for any test at HBR srl. Completely overhauled Technical information: Number of dies: 5 Bodpfxswar Efe Apvsli Heading tonnage: 800 kN Max cutoff diameter at 500N/mm²: 11.5 mm Max cutoff length: 85 mm Max kickout stroke (die): 65 mm Max kickout stroke (punch): 20 mm Speed: 275 pcs/min Power of main motor: 30 kW Die diameter: 54 mm Die length: 90 mm Punch diameter: 45 mm Net weight: 11,300 kg Gross weight: 13,000 kg We look forward to welcoming you at HBR srl in Calolziocorte (LC)

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20I/9019, Offer Number: M20I/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm cutting length: 87 mm Bedpswzknuefx Apvoli output pieces/min: 360 Location: Germany

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Refurbished as new acc. to CE Stand. Completely overhauled. New Guides, vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M8x80/55 mm. Bedpfx Ajt Uucaopvsli 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Dies length: 115/130 mm. To be viewed and tested at HBR srl - Calolziocorte (LC)

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm Blodsvc Ax Nopfx Apvsi ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Year of construction: 1988, condition: good (used), Carlo Salvi 1 die 2 blow Model 780/SV Bjdpfx Apohrdmxsveli Maximum Cutoff dia.mm: 6,35 Max. Cutoff length mm: 97 Max. K.O. length (die side) mm: 80 Max. Speed, pcs, per minute: 360

Condition: good (used), Description: The machine is in good technical condition, with the possibility of testing by prior arrangement. Maximum turning diameter: 660 mm Maximum swung diameter: 660 mm Main spindle: - Speed range: 35–5,000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub spindle: - Speed range: 35–5,000 rpm - Power (10 min/continuous): 18.5/15 kW Blsdsy Amqzjpfx Apvsi - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power supply: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Flush cooling: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: - Technical documentation - Chip conveyor with coolant - Tool magazine for 20 tools - B axis (positioned at 0.001° increments) - C and Y axes - Sub spindle angular position indexing - Synchronization of main and sub spindle - Tool presetting system (Tool Eye) - Front door locking - 20-position tool magazine - Complete cooling system - Interface for IC memory card

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Bedpfsuz If Nsx Apvjli Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 Bedpfx Aeul U Svopvoli serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: used, ORT RP18B overhauled Bljdpfjuua H Rox Apvji