Test pin set

Cary 3,01 - 3,49 mm

Year of construction: 2024, condition: as good as new (ex-display), Manual cleaning is carried out with special gloves in the front part. The effectiveness of the cleaning is guaranteed by a high-pressure pump and a special spray nozzle. In these units a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1- 80 bar. Technical data: Working surface: 950 x 700mm Interior height: 450 mm Load capacity: 70 kg Optional up to 150kg Spray pressure: 1-80 bar adjustable Tank capacity: 75 litres / heating capacity 2kW Basic version: - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank Nodpfxsf A Nq Ae Aacswc - Upward opening flap with 2 reach-throughs and gloves - Toughened glass pane - Door opening/closing system supported by gas pressure springs - Monitoring of the door opening by means of safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Cartridge filter in stainless steel with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Njdpfeglp Nqox Aacewc Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2025 Includes PC and Software Illustrative Image by the Manufacturer

Condition: new, Year of construction: 2026, The ERBA Separation Conveyor YE-60 is designed for separating workpieces and grinding media. It can be used as a mobile standalone machine or in combination with other machines, such as the ERBA Turbo (centrifugal system). The separation bed can be quickly and easily replaced to suit various requirements. An optional frequency inverter can be installed, allowing stepless adjustment of the motor speed. The YE-60 can be equipped with many optional features to simplify the separation process, such as a magnetic separator for small parts, a wash nozzle, or a parts hopper. Technical Data: - Gross volume: 60 liters - Motor output: 0.3 kW Nwsdpfxsn Ut N He Aacec - Weight: 140 kg - Screen area dimensions: 1,000 x 500 mm - Installation dimensions: 1185 x 540 x 575 mm (L x W x H) As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together, we develop efficient solutions tailored to your optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may show the system including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to offer advice with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, telephone, message portal). In the first step, we will send you a non-binding offer, together with information about our general terms and conditions with imprint and the right of withdrawal, before any purchase/contract is concluded.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Nodpfx Ajwv Hnmoacswc Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm z-travel 350 mm Control Heidenhein iTNC 530 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW Number of working hours 32369 h total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Nsdpfxsxfb E As Aacswc Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: like new (used), Year of construction: 2022, operating hours: 3,800 h, functionality: fully functional, Year 2022 - 3800 hours MultiSwiss 8x26, 6 Y-axes 8 motor spindles, 11 kW – 8000 rpm max Spindle capacity 26 mm, Z stroke 75 mm (max. workpiece 65 mm) 2 X-slide units in positions 1-8, stroke 80 mm 6 X-Y slide units in positions 2-3-4-5-6-7, X stroke 55 mm, Y +/-16.5 mm Counter spindle 11 kW – 8000 rpm max Z stroke 150 mm, X 170 mm HP ejector adaptation for counter spindle (requires 3010 or 3020) Fanuc 30iB CNC control Nwedpfx Aajxrfunecjc Integrated PC with Windows 10 operating system 21.5" color touchscreen Independent C axis on each spindle in main and counter operations (requires 0060 or 0065 or 0070 or 0075)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250108, total height: 2,200 mm, overall weight: 700 kg, total length: 1,700 mm, total width: 1,300 mm, type of input current: three-phase, workpiece weight (max.): 75 kg, tank capacity: 120 l, usable tank capacity: 60 l, input voltage: 400 V, rotational speed (min.): 50 rpm, rotational speed (max.): 180 rpm, power: 4 kW (5.44 HP), input current: 16 A, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The Turbo-Line 120 “S” model has a stainless steel ejection box mounted directly on the deburring machine. When the bowl lowers, the chips fall through a grid while the parts to be deburred remain on top. This Turbo-Line machine includes a 120-litre drum with vertical, straight sides and a separate base that rotates at an adjustable speed, normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the grinding bodies inside the bowl create a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. Nedpfxovvu Sns Aacswc The 120 liter work bowl can process up to 50-60 liters of product per batch, depending on the shape and size of the parts. The deburring parameters such as time and speed are individually controlled via a manual touch screen. The addition of water and compound is done via a manually adjustable ball valve, which is included in the delivery. The finished products are discharged by tilting the bowl, a process controlled via the touch screen. The emptying speed is also adjustable via the frequency converter on the touch screen.

Year of construction: 2001, condition: good (used), Travel X / Y / Z: 220 x 150 x 150 mm Z-axis device: standard equipment (= 5th axis) Max. taper angle: 15° (for workpiece 100 mm thick) Nodpfx Ajg Icdyjacewc Taper machining unit: standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 - 0.25 mm dimensions L x W x H 1900 x 2345 x 2060 mm Weight 3500 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: as good as new (ex-display), Year of construction: 2023, Manual cleaning is carried out using special gloves in the front section. Nwedpfx Aasr Hm R Tjcoc The effectiveness of the cleaning is ensured by a 0-8 BAR wash pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure is adjustable from 0-8 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: 0-8 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: reconditioned (used), Year of construction: 2017, For sale: CNC Swiss-type lathe TORNOS GT 26/6 II, including bar loader Manufacturer: TORNOS Model: GT 26/6 II Year of manufacture: 2017 Max. bar capacity: 26 mm CNC control: FANUC High-dynamic turning and milling operations Suitable for complex series production parts Axis / spindle concept – TORNOS GT 26/6 II Spindle concept: • 1 main spindle • 1 counter spindle • Synchronized machining for highly productive series manufacturing Axis concept: Linear axes: • X1 / Z1 – main spindle • X2 / Z2 – counter spindle • X3 – cross machining / additional tools C-axes: • C1 – main spindle • C2 – counter spindle Number of CNC axes: • 6 CNC axes Nwedpfex N Dg Tjx Aacoc Machining capabilities: • Simultaneous main and counter spindle operation • Milling and cross machining with C-axes • High process integration and short cycle times Machine weight: approx. 3,200 kg Transport dimensions (L × W × H): approx. 3,200 × 1,800 × 2,000 mm Bar loader Weight: approx. 700 kg Dimensions (L × W × H): approx. 3,500 × 800 × 1,500 mm We can also offer commissioning service upon request. The machine can be inspected by appointment near Heilbronn. Loading can be provided. Technical data, accessories, and machine descriptions are subject to change and non-binding.