3-axis CNC milling machine

Deckel Maho DMC 70 V

Condition: used, Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 2881-0469, Machine is running. Axes are moving. Spindle is rotating. Iiodpfx Asx Azqmsa Iea

Year of construction: 2010, condition: excellent (used), Autoclave Brand Spomasz Iiedpfjwfz Rnox Aa Ija Model WSA 18 Serial number: 106 Year of construction: 2010 Voltage 3 x 400 V, 50 Hz, 16 A Dimensions: 5400 mm x 2600 mm x 2300 mm It has a current UDT inspection

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2881-0191, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS DIALOG 112, spindle speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! Payment is due one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL SPECIFICATIONS Travel X-axis: 700 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Feed rate X, Y, Z: 1 - 10,000 mm/min Rapid traverse X, Y: 30 m/min Rapid traverse Z: 20 m/min Setup mode speed X, Y, Z: 1 - 2,000 mm/min Table width: 550 mm Table length: 900 mm Table load: 800 kg Max. setup height: 600 mm Distance spindle nose to table: 150 - 650 mm Max. spindle speed: 8,000 rpm Tool magazine positions: 40 Holder diameter: 40 mm Tool holder: SK 40 Max. tool diameter for standard tools: 80 mm Max. tool diameter for special tools with free adjacent slots: 140 mm Max. tool diameter for boring heads with free adjacent slots: 200 mm Ijdjxm Ty Ispfx Aa Ioia Max. tool length from spindle nose: 300 mm Max. tool weight: 12 kg Control model: SIEMENS DIALOG 112 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,300 x 2,900 mm Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The magnetic clamping plate shown on the table is not included in the scope of delivery.

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW weight approx.: 4200 kg dimension machine xH: 2,9 x 2,2 x 2,5 m The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump Iisdpfx Aaju Nda Ee Ija -Manual control unit (hand operated) -linear measuring system Heidenhain *

Condition: used, Year of construction: 1986, The Steriflow Barriquand 1351 Autoclave is an essential solution for sterilization and pasteurization in industrial environments. Thanks to its use of superheated water, it ensures maximum efficiency in preserving your food and pharmaceutical products. This model, dating from 1986, remains in excellent working order and continues to meet the high demands of modern production. Iodpfx Aaou Dimyj Ieia What's more, this autoclave has six baskets, enabling it to handle large quantities. As a result, it is ideal for high-volume production requirements, while offering outstanding optimization of energy conservation. What's more, its Type B circuit guarantees reliable performance and consistent product processing. What's more, Steriflow, a renowned manufacturer of professional equipment, has designed this autoclave to offer not only exceptional durability, but also flexibility for a variety of processes. To find out how the Steriflow Barriquand 1351 Autoclave can improve your operations, visit our website. You'll find detailed information on its benefits and how it works.

Condition: good (used), functionality: fully functional, Diameter range: 99 mm - 180 mm Height range: 90 mm - 250 mm Heads: 3 Isdpot Dhv Sjfx Aa Ijia Production capacity: up to 90 cans per minute Tooling for approx.: 153 mm

Condition: not inspected (used), Please see technical details on photo. Isdpehvzxzsfx Aa Ioia

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Iijdpeufp Svofx Aa Isa Parts shown by hand not come.

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides Isdjrmkfnspfx Aa Ijia legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: excellent (used), functionality: fully functional, WORKING MEASUREMENTS: Useful tape width: 55cm Number of spirals: 18 Spiral diameter: 4.20 m approx. Height of product entry: 1.20 m Height of product exit: 3.70 m Technical description: DRUM: It is the element in charge of transmitting the movement to the belt, it is built by stainless steel profiles welded to a base ring formed a kind of cage. MAIN STRUCTURE: It is the part of the tunnel that supports the conveyor belt (through an auxiliary structure) and the drum (through the bearings). It is built with folded and welded stainless steel plate profiles. AUXILIARY STRUCTURE: It supports the belt in its movement. To avoid metal-to-metal contact, it is covered with a special high density polyethylene profile. DRUM SUPPORTS: The lower supports have two main functions: centering the drum and supporting its weight. In the upper part, other supports are placed whose mission is exclusively to collaborate in the centering of the drum. EVAPORATOR: A circular evaporator located at the bottom of the drum is used, which results in an important space saving and in a horizontal air circulation without dead spaces. FANS: Fans are placed at the top and at the bottom with the discharge directed towards the inside of the evaporator so that the air flows through the evaporator towards the product. The fans will be sized so that the air velocity, both through the evaporator and through the product, is adequate. Iiedpfownzahox Aa Isa TRACTION: Consists of an electric motor-reducer of adequate power, with previously calculated reduction ratio, so that the speed of the drum and therefore of the belt are suitable. SPEED VARIATION EQUIPMENT: This consists of a frequency variator that, by varying the power supply frequency to the preset electric motor drive (between 20 Hz. and 60 Hz.), modifies its speed and therefore the output speed of the reducer, which allows us an appropriate retention time in each case. CONTROL PANEL AND MANEUVERING BOARD: The control panel includes the electrical and maneuvering elements of the Tunnel. In its front panel there are the general maneuvering controls, as well as a synoptic of operation and with the indications of the safety and alarms indicated with a luminous signal. Inside are the control elements, frequency variator with potentiometer, electronic starters for fans and other equipment protection elements.