Atmospheric Plasma Processor

Diener PlasmaBeam Standard

Condition: like new (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,000 kg, total length: 9,040 mm, total width: 3,390 mm, total height: 3,690 mm, space requirement length: 11,040 mm, space requirement width: 3,390 mm, space requirement height: 4,000 mm, Equipment: documentation/manual, Transportable cleanroom container ABN Stericube, as good as new, suitable for outdoor installation, so far only indoor installation, serviced annually (last maintenance log: see documents). Optional cleanroom equipment available (cleanroom vacuum cleaner, work tables, shelves + cabinets). Features: * Cleanliness class: ISO 6 (in the cleanroom, one class below in personnel and material airlocks) * Filter: HEPA H14 * Max. volume flow: 2 x 1,250 m3/h * Air exchange rate: 10 - 60 ACH * Electrical connection: 380 V AC, 50 Hz, 3 Ph, 16 A * Sockets inside: 8 x 230 V AC, 50 Hz Lodpfxetvf Ahs Ah Ueak * Internal dimensions of clean room: 5 x 3.2 x 2.35 m * Temperature: 20 °C +/- 2 K * Humidity: not regulated

Condition: excellent (used), IPG Ytterbium Fiber Laser with controller Here we offer an IPG Ytterbium Fiber Laser with control. IPG Ytterbium Fiber Laser Type: YLP-C-1-100-20-20 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, data are reserved!) Lasdof T Rwqspfx Ah Uok Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos. Lasdpfsq H H Ruex Ah Ujk

Condition: used, functionality: fully functional, Opportunity to acquire a good condition 1400 J&S surface grinder. Laodpfx Ahowtfngs Ujk Machine has been purchased from a liquidated company previously. Current pricing on these is between £5,000 - £8,000 +VAT in perfect condition. *Important Note* - This machine looks like it has been wired up to a secondary electrical panel, which is not included in this sale. Viewing recommended so the buyer can see the wiring arrangement. Sold as seen, viewing available on request.

Condition: good (used), For sale: Industrial powder feeder for thermal spray systems, Sulzer Metco brand, model 9MPE DJ Closed Loop Powder Feed Unit. Equipped with powder hopper, rotameter, controller with keypad and display, as well as alarm and diagnostic functions. Specifications: Power supply: 115 / 215 / 230 V Frequency: 50 / 60 Hz Power consumption: 0.82 kW Single-phase supply Year of manufacture: 2000 Nameplate model: 1002 9MPE DJ Ledpfxsu S Tgde Ah Ueak Local/remote switch Outlets for carrier and inert gas Glass chamber with feeder and air vibration Condition: Very good, complete, fully functional Used in Oerlikon Metco system Documented maintenance in 2017 and 2018 Manufactured in USA, Hicksville NY Ideal for industrial applications such as thermal spraying, metalizing, flame spraying, and protective coatings.

Condition: good (used), Year of construction: 2007, Primacon PFM 24 NGD / 4 axes, Year of manufacture 2007, Lasdpfx Aev Tb Eioh Uek Heidenhain iTNC 530 control, X/Y/Z travel 240/240/240 mm, Fischer Precise spindle up to 50,000 rpm, HSK F 32/25 E chuck, 4-axis Hirschmann, Length probe, 32-station tool magazine

Condition: like new (used), Year of construction: 2023, operating hours: 40 h, functionality: fully functional, machine/vehicle number: S/N:01130421-2.24, type of input current: three-phase, total height: 1,150 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, overall weight: 610 kg, feed length X-axis: 340 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, type of cooling: water, input current: 16 A, protection type (IP code): IP20, laser power: 600 W, input frequency: 100 Hz, laser wavelength: 1,070 nm, Equipment: documentation/manual, type plate available, Offered is a virtually new laser welding machine from Alpha Laser including accessories (water cooler, welding fume extraction, lifting table, and much more). Average. Power 600 W - peak pulse power CW: 9kW The ALFlak systems consist of (basic equipment): - Laser with processing head and Leica observation optics - UV glare protection - Multifunctional foot switch - Lighting - WIN Laser software "BKS" - Joystick Laser: pulse and CW mode, pilot laser Motorized movement system Machine axes: 3 or 4 Travel range (X, Y, Z) approx. 320 x 330 x 370 mm Arm deflection/working distance: approx. 1400 mm Incl. standard beam deflection unit (600-0365A) Incl. 12.1" touchscreen new version (300-1171C) With door acknowledgement on the display holder Lajdpfx Asvu Tdgoh Usk Incl. magnetic beam protection plate (701-0687A) If you are interested, I will be happy to provide you with a detailed offer.

Condition: excellent (used), Hilger & Kern P80 Pump Ledpfeg Ib Npsx Ah Ujak Basic version P80 Drum size 80l Transmission ratio (drive) 56:1  Delivery rate (at 20 double strokes) l/min 0.61 Material Viscosity  (ball valve pump/scoop piston pump) 2.5 mio. Working pressure (max.) bar 20-250 (315) Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x W) mm 610 x 500 Height retracted mm 1400 Height extended mm 2200 Weight without container kg 65 / 72 Maximum pack height mm 750 Maximum pack size 80 Maximum outer container Ø mm 440 A single pump is included in the delivery Complete factory lock, Large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!