Glass bottle filling plant

Diverse

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Fpsdpfsztpxmjx Anlek

Year of construction: 2026, condition: new, A small, table version semi-automatic Bag in Box filler is an easy, economical and mobile solution for filling liquids into Bag in Box or Stand up Pouch packages. Insert the bag or pouch into the filler and pull the handle – the package is filled automatically. Return the filling handle into the start position, cap the bag and the filling process is finished. - Capacity ~250 pcs. of 3 L packages (depending on the pump). - The weight of the machine is only 50 kg so it is especially easy to move or transport from one facility to another. - There are two options of the machine: with or without pump. When purchasing machine without pump, you can connect your own pump or fill the packages by gravity. Fpjdpfx Anoh S H A Ielok - Hot and cold filling of bags and pouches is possible from 0,5 liter up to 20 liters. - The machine is suitable to fill both Bag in box and stand up pouch packages with a tap. - Bag in Box filler pre-vacuums the bags and pouches before filling. - Machine comes with touchscreen panel and a multi-language menu. - Repeatability of volumes with an error of ± 0,5 %. - Easy-to-adjust filling table for different volumes of bags and pouches. - Working surface of the table consists of conveyor rollers which are easy to clean and help for the smooth slide of the bags and pouches. - The filler is easy to clean after work with external and CIP cleaning. - The filler is reliable, simple and easy to use and maintain.

Condition: used, lot (ca. 25 Stück) verschiedener cutters und Fräskombinationen vorwiegend für MEC Vorschub oder ohne Markierung. Technical data: - Markierung: Ohne oder MEC Fpodpfx Aezryn Asnlek - Bore: 40 mm - Weight: ~100 kg

Condition: used, Lot of 10 Used Industrial Pumps – Various Brands & Sizes We offer a complete lot of 10 used industrial centrifugal pumps, available from our warehouse in Rotterdam, The Netherlands. The lot consists of various pump configurations and sizes, including several pumps with stainless steel pump housings, large flange connections, and heavy-duty electric motors. The pumps come from an industrial environment and are offered as one complete lot. Lot details: Quantity: 10 pumps Condition: Used Various sizes and capacities Various electric motor sizes Several stainless steel pump housings Flanged inlet/outlet connections Complete pump/motor assemblies mounted on base frames Suitable for industrial applications The pumps have not been individually tested by us and are therefore offered in their current condition. Location: Rotterdam, The Netherlands Delivery: Ex Works Rotterdam, loaded onto buyer’s truck Payment: 100% payment in advance Terms of sale: The complete lot is sold “as is, where is”, without warranty or guarantee. No claims or returns will be accepted. Additional photographs and individual pump/nameplate information can be provided upon request. Preferably sold as one complete lot. Fpodsztraaspfx Anlok

Condition: good (used), Rarely available, Toyo Jidoki pouch machine direct from recently closed manufacturer of sauces, stocks and soups. Was filling these products into stand up retortable pouches. Bought new in 2007. Fpedpfxsqudive Anlok

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Complete container system consisting of 24 units (20ft), manufactured in 2023 and in very good, well-maintained condition. The system was purchased in 2023 and is ideally suited for construction sites, accommodation, office, or social spaces. Composition of the 24 containers: • 1 × sanitary container • 1 × utility container with 2 showers and 2 partitions • 7 × living double containers (total of 14 units) each with its own wet room • 10 × office containers, most recently used as an open-plan office Dimensions per container: 6,063 × 2,450 mm, interior height 2,500 mm. Location: Bad Dietzenbach. Collection or transport from the location. We will gladly provide you with further photos and detailed information – a sale in smaller quantities is also possible upon request. Technical data: Number of containers: 24 units (20ft) Sanitary container: 1 unit Utility container: 1 unit (2 showers, 2 partitions) Living containers: 7 double containers (14 units) with wet room Office containers: 10 units (most recently used as an open-plan office) External dimensions (per container): 6,063 × 2,450 mm Interior height: 2,500 mm Year of manufacture: 2023 Condition: very well maintained Location: Bad Dietzenbach Fpsdpfx Aoza Ahvonljk

Condition: good (used), Various suction manifolds, suction distributors Only suction bell C is currently available; details can be found in the photos. Suction bell C: 140 euros The parts can be viewed on-site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse; see "other offers from this seller." Fjdpjtp Hpbofx Anlopk

Condition: like new (used), 2 units of feed and dosing bunkers with rasp discharge, suitable for light and organic materials (e.g. wood chips). Dimensions (L x W x H): approx. 9.1 m x 2.8 m x 2.5 m (with legs approx. 3.8 m). Discharge via 4 shafts each, driven by a 1.1 kW geared motor. Fpodpfsyv Ef Rsx Anlok

Condition: used, Containers (stackable containers) – steel sheet Assortment of storage containers – Fpjdpfxog U Am Te Anlsk stock containers – metal storage boxes – transparent storage boxes, Schäfer boxes, used. Various designs (painted, galvanized, closed, perforated, with handle recess) and various sizes / stackable. Dimensions: 30 x 50 x 20 cm + 37 x 37 x 11 cm Total number of pieces: 56 The stackable boxes are available for €180.00 net ex works, plus packaging costs. Ideal for transport and storage. All technical specifications are subject to typographical errors and errors. We only sell to countries within the European Union.

Condition: good (used), Our Services: - Repair factory for transformers to 63 MVA / 110 kV Fpedpfs Swr Esx Anlsk - New transformers Oil / cast resin - Newly reconditioned warehouse transformers / - Rental of transformers and stations - 24 h emergency service - Recycling / Disposal of Transformers - Accessories for transformers - Training / Expertise - Conversion of Oeltrafos on environmentally compatible Esterfilled - Certification: ISO 9001, OHSAS

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Fpjdpfx Aswa Rhronljk Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: used, Reusable bottle line for filling beverages into 0.5 l and 0.33 l glass bottles. The filling line comprises the following components: - Uncorker (Rink, 1995) with 2 uncorking heads - Unpacker (Albert Frey) with 2 unpacking heads - Crate washer (Göbel, 1971) for cleaning using spray nozzles - Bottle washing machine (GM Gera, 2007), single-end machine - Empty bottle inspector (Krones, 2016) for checking the base, side walls, neck and residual liquid - Glass bottle filler and capper (Krones), short-tube counter-pressure filler with 40 filling valves and capper for crown caps - Labelling machine (Krones, 1995) for wet glue labelling - Date coding (Domino, approx. 2010 – 2017), inkjet printer - Fill level, label and cap inspector (Syscona, 1997 – 2008) - Packer (Albert Frey, 2002) with two packing heads - Palletising system (ABB, 2014) with articulated arm robot - Conveyor belt systems for bottles and crates Additional title: Reusable bottles; manufactured between approx. 1971 and 2016 Nominal capacity appr.: 12000 Fl/h Formats: 0.5 l Euro and NRW, 0.33 l Giesinger; crown caps Fsdszhl Hpspfx Anlepk Features: Uncorker; Unpacker; Crate washer; Bottle washing machine; Empty bottle inspector; Filler and capper; Labelling machine; Date coding; Fill level/label/cap inspector; Packer; Palletising system

Condition: used, Bolts, hex bolts, flange nuts, hex nuts, collar nuts, washers, washers -Washers: Washers, various sizes 276 kg -Sizes/number: Ø10.5 to Ø31.5 mm see photo parts list Fedpjirnwxsfx Anlepk -Price: complete -Total weight: 276 kg

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Our horizontal form, fill and seal machine from the DEAPHS series is specially designed for filling sachets and doypacks sealed on 3 and 4 sides. Thanks to the various dosing systems, such as auger dosing, the volumetric cup filler and the multi-head filler, the machine reliably packs powdery, liquid and granular products. The machine also produces the bags to be filled independently from flat film, making it a cost-effective and efficient packaging solution. The modular design of the form, fill and seal machine means that it can be converted and extended quickly and easily. ✅ Perfectly suited for food, pet food, pharmaceutical products, cosmetics and other non-food products. ✅ Also ideal for filling small product quantities and samples - for example in our mini pouches. Fpedsum R Ezjpfx Anljk ✅ Optional accessories such as volumetric cup filling system, multi-head combination weigher, piston filling device and Hibar pump filler ✅ You can also obtain suitable packaging material (pouches & film) from us Independent film unwinding shaft: Ensures good control of film tension, flexible adjustment to film roll width and bag specification possible, better doypack forming. Configuration: -Film unwinding shaft -Bag bottom sealing -Bag bottom former -Three horizontal sealing units -Two vertical sealing units -Servo bag take-off -Mechanical bag cutting -Vacuum bag opening -Photocell control -LCD - Touch display -SPS - Panasonic -Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Connected load: 380V, 3-Ph, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Condition: good (used), Edge banding, edge trimming. Veneer roll Fpsdpfx Ajwk D Rbonljk -Edge tape: edge banding approx. 62 rolls -Type: various designs, see photos -Price/Sale: complete -Dimensions: 1120/630/H900 mm -Weight: 277 kg