Complete brewing plant

Diverse

Condition: used, Valves, gate-valves, butterfly-valves, ball-valves, security-valves Todstunb Aepfx Al Asc

Year of construction: 2000, condition: used, Drais Mannheim / Lödige CoriMix® CM Continuous Ringlayer Mixer Type: K-TT 700 Motor: 55 kW 1500rpm Fully Stainless execution Todpsh H S Hdsfx Al Ajc

Condition: used, used fans from various manufacturers and with a wide range of performance characteristics: - Klima Celje 104CVX560, 75 kW - RVM 02/71-80, 4 kW - 2 x SPELLNA VRU-35.1-200, 7.5 kW - MHI 71, 11 kW - 2 x WOODS, 36 kW - VENTA MHI 31.5-50, 7.5 kW Tsdez Ef Skspfx Al Aoc - RKR K40R, 6.8 kW

Condition: used, Reusable glass bottle filling line for filling fruit juice and juice mix drinks. The filling line consists of the following components: - New glass bottle lifter (Kettner, 1985) with pallet loading, gripper head, empty pallet removal, bottle table and intermediate layer remover - Empty palletiser (Kettner 1994) with pallet loading, gripper head, crate table and empty pallet removal - Unpacker (Kettner, 2002) with packing heads and gripper tulips - Crate washer (Bohrer), crate cleaning trough with two crate turners - Unscrewing machine (Adelski, approx. 1990) with 12 unscrewing heads - Bottle cleaning machine (Krones, 1994) single-end machine - Empty bottle inspector (Heuft) for checking the base, mouth, side walls, thread and residual liquid - Filler (Bertolaso, approx. 1990) for hot filling with 60 filling valves and capper for twist-off caps. - Tunnel cooler (Niko, 2015) for spray cooling of the filled beverage - Labelling machine (Krones) for cold glue labelling of belly, back and neck labels - Label inspection (Metec) - Inkjet printer (Markem-Imaje, 2012) for best-before date marking - Packer (Kettner, 1989) with packing heads and gripping tulips - Palletiser (Kettner) with empty pallet feeding, gripping head and raised working platform with control panel - Pallet securing device (Bornbinder) for strapping the pallets with a horizontally applied cord - Film wrapper (Robopac) for wrapping the pallets with stretch film Additional title: Returnable bottle filling line with palletising, year of manufacture 1985 - 2015 Tjdez D Hmmjpfx Al Aec Capacity: 15000 bo/h referring to 0.5 l bottles Formats: 0.2 l; 0.25 l; 0.5 l; 0.75 l, 1.0 l bottles / 6-packs, 12-packs, 20-packs and 30-packs / twist-off caps / Euro and brewery pallets Operation / Control: S7-300 (pallet wrapper), otherwise S5 or Schleicher control system Features: New glass lifter, depalletiser, unpacker, crate washer, unscrewer, bottle cleaning machine, empty bottle inspector, Glass bottle filler and capper, tunnel cooler, labelling machine, label inspector, date coder, packer, palletiser, pallet strapper, pallet wrapper

Condition: used, Year of construction: 2017, Overview  Todpfxoty Ddro Al Ajc This brew house was built in 2017 by Spanish manufacturer INOX DUBRA and has a wort volume of 25 hectoliters. Various equipment is included in the offer, from the brewhouse to bottling. All the equipment is still installed and be viewed and inspected in person at any time.   Scope of delivery  - Brewhouse | INOX DUBRA | 25 HL | Two-Vessel Brewhouse   - Plate Heat Exchanger | CESPEDES | UFT34/1OO- UFT32/12 | 2015  - Cold Water Tank | 2.500L   - 3x Isobaric Fermentation tanks | INOX | 2.500L | 2020  - 3x Atmospheric Fermentation tanks | INDUSTRIAS CESPEDES | 1.000l | 2014  - Brite tank | INDUSTRIAS CESPEDES | 2017   - Grinding mill  - Water tank | 1.000L   - Compressor   - Helicoidal pump   - Volumetric pump - Manual atmospheric filler - Steam generator

Condition: reconditioned (used), various measuring devices from different manufacturers. Tjdez Epyljpfx Al Asc

Condition: used, manufacture diverse We offer: Spare parts package for Index R300 1 wire mesh container (L 1.2 m x W 0.8 m x approx. H 1.4 m) Tsdpfx Aozz S I Hsl Ajc An overview in Excel format can be provided upon request. Sold without warranty or guarantee.

Condition: used, Year of construction: 1999, 6 vertical storage tanks with jacket cooling Additional title: vertical, coolable stainless steel tanks Content: 2200 l Max. pressure: 0,99 bar Length: 1000 mm Width: 1000 mm Height: 1965 mm Operation / Control: manual Material: stainless steel 1.4301 Position: free-standing Base construction: cylindrical tank with curved bottoms and square tube feet on domes Features: sprayball, bunging apparatus, pressure gauge, 1 shell cooling zone, standhose for content display, manhole, thermometer and sampler in the shell, manual valve for cooling control, central bottom outlet Tedpfsw Tlppsx Al Aoc

Condition: used, functionality: fully functional, Various used conveyor belts in stock Tedswm Nibspfx Al Asc Belt widths: between 500 and 1,200 mm Axle lengths: from 2 to 40 m For all types of mineral bulk materials With and without supports, some with undercarriage

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Tsdjztpxmopfx Al Ajc

Condition: new, Hemming tool for Lvd/Trumpf Tedpfx Alei Hbcwe Asc

Condition: used, lot (ca. 25 Stück) verschiedener cutters und Fräskombinationen vorwiegend für MEC Vorschub oder ohne Markierung. Technical data: - Markierung: Ohne oder MEC - Bore: 40 mm - Weight: ~100 kg Tedpfx Aozryn Aol Aec

Condition: good (used), Various suction manifolds, suction distributors Only suction bell C is currently available; details can be found in the photos. Todpfx Aljtp Hpbe Aec Suction bell C: 140 euros The parts can be viewed on-site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse; see "other offers from this seller."

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Todew U A T Ijpfx Al Aec Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Condition: excellent (used), functionality: fully functional, Various as-new VDI40 tool holders with cylindrical receptacle, used tool holders in excellent tested condition, top quality, various manufacturers including e.g. ISCAR. Pos. 1) Order number: 401_404_E2 Available: 4 pcs Tool holder for cylindrical tools / boring bars / drills: Receptacle diameter: 32mm Price each: €45.00 Pos. 2) Order number: 405_E2_01 Tjdpfxsyuv Uls Al Asc Available: 1 pc Tool holder for cylindrical tools / boring bars / drills: Receptacle diameter: 31mm Price each: €45.00 Pos. 3) Order number: 406_407_408_E2_03 Tool holder for cylindrical tools / boring bars / drills Available: 3 pcs Receptacle diameter: 25mm Price each: €45.00 Pos. 4) Order number: 409_E2_01 Tool holder for cylindrical tools / boring bars / drills Available: 1 pc Receptacle diameter: 20mm Price each: €45.00 Pos. 5) Order number: 410_411_E2_02 Tool holder for cylindrical tools / boring bars / drills Available: 1 pc Receptacle diameter: 8mm Price each: €45.00 Dimensions: D = 83 mm d-2 = 83/40 mm (45.52 mm) d-4 = xx (8,10,12,20,25,32,40 mm) internal diameter H = 32.5 mm L1 = 75 mm L2 = 22 mm l-4 = 53 mm Form E2 For drilling tools with cylindrical shank With internal as well as external coolant supply Surface hardened, black oxidized and ground