Bale press

DIXI 60SLD 80SLD

Condition: ready for operation (used), Year of construction: 1991, | Model | Lokomo C-140B Jaw Crusher | | Feed Opening (Width × Height) | approx. 1400 mm × 1000 mm | Kjdpsxcg Spjfx Ah Ujnf | Maximum Feed Size | approx. 600–800 mm | | Strength of Material to be Crushed (e.g. rock) | ~200 MPa (varies significantly depending on material) | | Capacity (Throughput) | estimated 400 t/h | | Motor Power | 200 kW | | Weight Range | 55 tons |

Condition: used, machine/vehicle number: 006724, Max width workable: 1200 mm Max length workable: 1200 mm Max height workable: 1600 mm Knodpfx Aheu A Ev Ue Usf

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 110,000 mm, total height: 2,850 mm, rotational speed (max.): 2,100 rpm, overall weight: 20,000 kg, power: 209.62 kW (285.00 HP), transport length: 10,500 mm, transport width: 240 mm, transport height: 395 mm, Equipment: rotational speed infinitely variable, WERT PHANTOM mobile shredder Kodetty Hhjpfx Ah Ujnf on crawler chassis for various applications - wood - waste - tires - glass - paper - Building rubble - Light scrap Tooling according to customer requirements Equipment: Power: 205 KW - 285 HP Caterpillar C7.1. stage 5 Transmission: 2x 125,000 NM Optionally synchronous or asynchronous shaft rotation Hydraulics: Linde Belt width: 1000mm Discharge height: 3300 mm Magnet: Optional Spiral fan: standard Radio : standard Water spraying: standard Weight: 20 tons Dimensions L/W/H : 11x2,4x2,85m

Condition: ready for operation (used), Cone Crusher Svedala Ksdpfxspn I H Te Ah Ujnf Brand: Svedala Type: 36/H/MC Incl.: basic chasis and oil unit

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Knodpjiuky Isfx Ah Usf

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Knedpfxevwlqqj Ah Uef Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Knodpoic Rl Defx Ah Ujf Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Press dimensions: length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. Ksdpfx Aoh Nyfyoh Uenf If you have any questions, please contact us at 539 660 495.

Condition: used, Year of construction: 2023, operating hours: 248 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tyres (front): 600/70 R30, Tyres (rear): 710/70 R42, Operating hours: 248, First registration: 17.12.2024 _____ Standard equipment/technical data ENGINE Max. power 180/245 kW/HP (ISO 14396) Max. torque 1100 Nm Maximum power with power boost 194/265 kW/HP Max. torque with power boost 1178 Nm 6-cylinder, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without EGR, Stage V Electronic engine management with Vistronic fan control Engine speed memory Powercore engine air filter with pre-cleaner EasyCare cooling package Additional fuel pre-filter with water separator 500-litre fuel tank Knedpfxjvv Dp Ns Ah Ujf

Condition: reconditioned (used), Year of construction: 2003, Cyklop XZE-311 strapping press Year of construction: 2003 Passage width: max. 2200 mm Passage height: max. 2200 mm Belt guiding distance: 625 / 440 Roll pitch: 60 mm Strapping speed: 2.9 m/s Strap tensioning force of the strapping unit: adjustable up to 2000 N Knodpfxjtqpade Ah Uof Pressing force: adjustable from 5 to 48 kN