CNC 5 axis machining center

DMG DECKEL MAHO HSC 55 Linear

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump The machine can be viewed in operation by appointment. Nedpfx Ajzkpxnjc Dswk

Condition: used, Year of construction: 1998, Turning length 322 mm Max. swing over bed ways 510 mm Max. turning dia. 279 mm Nwodpfox N A N Hsx Ac Dok Spindle speeds 60-6000 rpm Spindle bore 53 mm Turret w/12 stations Control: Fanuc 21 T Equipped with: Magazine bar feeder Hatec Rapid Load 12 Tail stock Various tool holders & collets 3-jaw chuck

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Nwodpfx Acoxdxhro Djk Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Nedjvf D Anspfx Ac Dowk

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 Nodpfsyackdsx Ac Djwk swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: excellent (used), Year of construction: 2013, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,020 mm, For sale is a 5-axis machining center from the world market leader, GROB. Model G550 with pallet changer. Year of manufacture: 2013. Location: Switzerland. The machine is in unparalleled, extremely good condition, has been used very little, and was only used for experimental purposes in an experimental toolmaking department. Control system: Siemens SINUMERIK 840D sl Machining type: 5-axis simultaneous machining Horizontally arranged motor spindle Swiveling rotary table Automatic pallet changer Travel distances: X-axis: 800 mm Y-axis: 950 mm Z-axis: 1,020 mm Rapid traverse rates: X-axis: 65 m/min Y-axis: 50 m/min Z-axis: 80 m/min Maximum axis acceleration: 9 m/s² Maximum feed force: 8 kN Positioning accuracy: Positioning uncertainty X/Y/Z: 0.006 mm Repeatability X/Y/Z: 0.004 mm Main spindle: Motor spindle Tool interface: HSK-A63 / SK 40 Maximum spindle speed: 16,000 rpm Spindle power ED 100 % / 40 %: 25 / 35 kW Maximum spindle torque ED 100 % / 40 %: 160 / 223 Nm Spindle bearing diameter front: 80 mm Chip-to-chip time: approx. 4.2 seconds Tool magazine: Pick-up disk magazine Tool interface: HSK-A63 Number of tool positions: 60 Maximum tool length: 465 mm Maximum tool diameter without restriction of adjacent positions: 72 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool weight: 8 kg Maximum tilting moment: 12 Nm Workpiece area: Maximum pallet load: 700 kg Maximum table load: 800 kg Maximum workpiece diameter: 800 mm Maximum workpiece height: 900 mm Pallet system: Automatic pallet changer Pallet size: 630 x 630 mm 2 pallets Coolant and media supply: High-pressure internal coolant system: 80 bar Minimum quantity lubrication: Lubrix V7 Switching between MMS and coolant Pressure booster: 10 bar Compressed air storage tank: 20 liters Chip conveyor Coolant and filter system Electrical connection data: Connection voltage: 3/PE 400 V AC Frequency: 50 Hz Rated current: 55 A Fuse rating: 160 A Power requirement: at least approx. 42 kVA Required air pressure: approx. 5 bar Njdpfx Acszp Rqio Dswk Machine weight: Approx. 24,000 kg including pallet changer Equipment: 5-axis simultaneous machining Siemens SINUMERIK 840D sl Motor spindle with 16,000 rpm HSK-A63 tool interface Automatic pallet changer Pallets 630 x 630 mm Tool magazine with 60 positions High-pressure internal cooling 80 bar Minimum quantity lubrication Lubrix V7 Pressure booster Compressed air storage tank Chip conveyor Coolant and filter system

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. Nwodpfx Ajyt E Nvsc Djk The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Control: Mazatrol T-Plus Standard chuck: Kitagawa N-06A0515 The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Nedpfex I A Awox Ac Dewk Tool presetting device Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, number of axes: 6, This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for sale.Contact us for more information. Nwsdpfx Aox D R Auec Dek • Tool turret: 12 positions

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min Nwsdpjwm Rm Iefx Ac Dok dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant