Tool presetter

DMG MICROSET VIVA 720

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Bar capacity 80mm, Kjdpfx Aaox Eitue Rsdt Spindle speed 4,000rpm, milling speed 10,000rpm, Main spindle power 18.5Kw, C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Kdedpey Spuuofx Aa Rst Maximum turning diameter 660 mm Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: excellent (used), Year of construction: 2007, 1 used container steam boiler ----- Kdodpfx Aajzguypo Rot - installed in a 20” sea container - Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 m² Boiler output max.: 1,250 kg/h Operating pressure: 16.0 bar Increased test pressure: 29.6 bar Water content at nominal water level approx.: 993 l Water content when full approx.: 1,365 l Year of manufacture: 2007 CE marking: 0036 Equipped with a Weishaupt WMGL combination gas/oil burner, gas control system, control panel, feedwater pump, and the existing coarse and fine fittings.

Condition: used, Year of construction: 2002, Wire erosion / EDM Travel distance X: 750 mm Travel distance Y :500 mm Travel distance Z: 400 mm max. workpiece size X: 1050 mm max. workpiece size Y: 750 mm max. workpiece size Z: 400 mm max. workpiece weight: 1500 kg U / V axis: 770 x 520 mm Kodpfx Aaew Ei Ste Rsdt generator: 60 Ampere Linear drives

Condition: used, Year of construction: 1994, Three-pass steam boiler (Loos, 1994) with oil and gas firing for the production of 7000 kg/h of steam. The boiler water chamber holds 90 hl of water. Other components: - Combination burner (Saacke) for oil and gas firing - Gas control system - Oil supply with suction pump unit (hp technik) - Economiser (2005) with a heat output of 275 kW - Feedwater tank (Loos, 1994) with a capacity of 40 hl - Water softening system (Pentair, 2024) - Feedwater pump (Grundfos) with a power rating of 5.5 kW - Operating hours counter for oil and gas operation - Control cabinet with operating elements - Various pipework, valves and fittings Additional title: oil- and gas-fired steam boiler of the three-pass design with an economiser Steam capacity: 7000 kg/h Max. operating overpressure: 10 bar Water volume steam boiler: 9000 l Position: lying on foundation plate Base construction: three‑pass boiler design Kodpfx Aaszi Anyj Redt Features: Combined burner; gas control system; oil supply (with suction pump unit); economiser; feedwater tank; water treatment; feedwater pump; operating hours counter for oil and gas operation; control cabinet; various pipework, valves and fittings

Condition: excellent (used), Year of construction: 2014, 2 used rapid steam generators ----- Manufacturer: CERTUSS Type: Universal 500TC Capacity: 500 kg/h Maximum heat output: 364 kW Operating pressure: 10 bar Test pressure: 57 bar Water content approx.: 42.9 liters Kedpfx Aajzgvifj Rsdt CE marking: CE 0035 Year of manufacture: 2014 Equipped with a Certuss gas burner, gas control system, control cabinet with touch control, mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: excellent (used), input voltage: 10,000 V, Medium-voltage switchgear – Siemens Kdsdpezdbtlofx Aa Rot

Condition: good (used), Year of construction: 2004, turning length: 1,345 mm, turning diameter: 420 mm, spindle speed (min.): 3,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,280 mm, Manufacturer: Mori Seiki Co., Ltd. (Nagoya, Japan) + chuck system Machine model: NL3000MC/1250 Serial number: NL301DJ0070 Year of manufacture: October 2004 Machine weight: 7600 kg Electrical data Voltage: AC 200 V Phases: 3 Frequency: 50 Hz Rated power: 44 kVA Full load current: 127 A Spindle motor current: 200 A Interrupting capacity: 5 kA Electrical diagram number: NL301DJ0070 The machine is a CNC turning center (Mori Seiki NL series) with a nominal electrical power of 44 kVA. CHUCK SYSTEM: Manufacturer: Kitagawa Chuck: B-212A821F Chuck cylinder: S2091 Technical data Permissible pressure (when using external chuck jaws on the standard package): 2.7 MPa Maximum speed: 3000 min⁻¹ CNC turning center of the NL series (Mill Center version) with milling capability (driven tools + C-axis). The data is compiled from original Mori Seiki / DMG MORI catalogs and matches your machine's nameplate (year 2004, weight 7600 kg, 44 kVA, 200 V). Capacity ValueMax. turning diameter420 mmMax. turning length1250–1345 mm Swing over bed995 mm Swing over carriage825 mm Bar capacity90 mm (3.5") Standard chuck12" (Kitagawa B-212A821F) Travels X-axis: 260–280 mm Z-axis: approximately 1280–1370 mm (depending on the exact configuration /1250) Y-axis: option (usually ±60 mm for Y/SY versions) Spindle Max. speed: up to 4000–6000 min⁻¹ (limited to 3000 min⁻¹ with your Kitagawa chuck) Spindle bore diameter: 105 mm (approximately 91 mm with chuck) Spindle mounting: A2-8 Spindle motor power: 22/18.5 kW (30/25 HP) or up to 30 kW (depending on the version) Minimum indexing angle: 0.001° Turret (MC version) Number of stations: 10 or 12 Rotary tools: yes (max. 6000 min⁻¹) Power of rotary tool drive: 5.5 / 5.5 / 3.7 kW Kdjdszm Tkaspfx Aa Rjt Indexing time: approximately 0.2–0.3 s Rapid traverses and drives Rapid traverse X/Z: up to 30 m/min Rapid traverse Y: up to 10 m/min (if equipped) C-axis: up to 300–400 min⁻¹ Electrical and other data (from your nameplate) Rated power: 44 kVA Voltage: 200 V AC, 3-phase, 50 Hz Full load current: 127 A Machine weight: 7600 kg Controller: typically MSX-850 / MAPPS

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 250 mm max. workpiece size X: 590 mm max. workpiece size Y: 450 mm max. workpiece size Z: 250 mm max. workpiece weight: 550 kg table size X: 935 mm table size Y: 770 mm U / V axis: 80 CNC wire EDM machine Kdjdpfozu Rurox Aa Ret X/Y travel: 400 × 300 mm Z-axis travel: 250–350 mm U/V axes: 80 × 80 mm Taper cutting: up to ±20° at 80 mm workpiece height Max. workpiece dimensions: 590 × 450 × 250 mm Max. workpiece weight: 550 kg Large worktable: 935 × 770 mm Wire diameter: 0.1–0.3 mm Max. wire speed: 420 mm/s Linear motor technology on X and Y axes Suitable for high-precision contours and complex workpiece geometries U/V axes also enable angled and taper cutting

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Please provide us with your offer price. Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals. Kdodpfx Aszkh Dvsa Rot