CNC - machining center

DMG DMU 210 P

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain ITCN 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. - Direct position measuring systems in all axes - Heidenhain TS workpiece measurement - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology Dedpfx Apey H Er Ejweut The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm Dsdpfx Apoylw Stewjut • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. Dedpfx Apex D Ux Tewout The operating hours clearly indicate: Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Dusdpfx Ajdpak Repwet Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Completely refurbished 2018 with new Pantec Eagle Pro Controller Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Option : Laserscanner (e.g. Kreon) Probe changer

Condition: like new (used), Year of construction: 1999, functionality: fully functional, MORI SEIKI SL-600B/2000 CNC LATHE Category: CNC Turning Centers Reference No.: 400212 Capacity: Ø900 X 2000 MM Year of Construction: 1999 Technical Specification: CNC Control : Fanuc 18iT WORKING CAPACITY Max Turning Diameter : 900 mm Max Turning Length : 2000 mm Swing over bed : 994 mm Distance Between Centers : 2300 mm Swing over cross slide : 733 mm Travels (X) : 485 mm (440 + 45) mm Travels (Z) : 2150 mm TURRET Turret : 12 Station Square tool shank size : 32 mm Boring bar shank diameter : 65 mm TAILSTOCK Tailstock : MT5 Tailstock Quill Travel : 150 mm Tailstock Quill Dia : 150 mm SPINDLE Max Rotation Speed : 1500 RPM Main Spindle Nose : JIS A2-15 Main Spindle Bore : 185 mm Spindle Type : 3 Step Gearbox Spindle bearing inner diameter : 260 mm MACHINE DIMENSIONS Weight : 16T Djdpfxjx Nv Shj Apweut Additional Details: All Specifications are found online, and subject to verification by buyer.

Condition: used, Year of construction: 2005, control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & pallet changer. The machine is in a well-maintained condition and can be inspected under power at any time in the Swiss factory location. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U Dedjyy A Nujpfx Apweut

Condition: ready for operation (used), Year of construction: 2008, Make: MAZAK Type of machine: INTEGREX 300-4ST Year of manufacture: 2008 Control system: Mazatrol Matrix Machine's weight: 13.900 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Dodeyh I Tdopfx Apwsut Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: new, Year of construction: 2024, functionality: fully functional, Incorrect investment by a corporation. Machine is new and unused (already delivered). The machine is available immediately with no lead time. An extremely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: fully closed loop scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optional 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: direct drive Minimum index: 0.001° Maximum speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: central spindle cooling Internal coolant: optional CTS 7 MPa Tool magazine: chain-type, 60 positions [optional 100/120] Dodpfx Aoxizdaepweut Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [for >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment / Options: - Workpiece probe - Tool measurement - Laser control (optional) - High-pressure coolant 7 MPa (optional) - Chip conveyor - Fully enclosed enclosure with roof Dimensions n.a. Weight n.a. Connection data n.a.

Condition: used, Year of construction: 2008, x-travel 410 mm y-travel 570 mm z-travel 140 mm control Mazatrol Matrix Maximum working diameter 545 mm Maximum working length 519 mm main spindle speed 35 - 6000 U/min tool taper Capto C6 Dedpfeyt R Idsx Apwsut rapid traverse y/x/z axis 30/26/33 m/min Performance/capacity: Max. swivel range: 545 mm Max. machining diameter: 545 mm Max. outside diameter for bar work: 51 mm Max. machining length: 519 mm Max. workpiece weight: -Chuck work: 150 kg -Bar work: 200 kg Main spindle: Spindle speed: 35-6000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (advance/return): 434/281 mm Milling head: Milling head type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mm Milling spindle speed: 15-12000 rpm Equipment/accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Condition: excellent (used), Year of construction: 2019, 5-Axis Machining Center POS POSMILL H 800 U Control: Heidenhain iTNC 530 Year of manufacture: 2019 ATTENTION: Machine has ONLY 500 spindle hours!!! Traverses: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Table load capacity: 1,200 kg Spindle interface: HSK-63A Tool magazine: 96 positions Spindle speed: 18,000 rpm Equipment Rotary-swivel table Rotating viewing window Glass scales on all axes Handheld control unit Heidenhain touch probe Dujdpjyk Az Defx Apwjt Laser tool breakage detection Rotary union in the table Air connection in the table incl. M-function Coolant system Internal cooling Chip conveyor Automatic roof Extraction unit Documentation General data Repeat accuracy/positioning accuracy on delivery: 0.004 mm/0.008 mm (VDI/DGQ 3441) Including tool holders with tools mounted in the tool changer (No suggestions), oil mist extraction IKZ Chip conveyor Rated power 90 kVA Full load current 125 A Max. current load 200 A 400 V 50 Hz