Tool holder / tool holder

EROWA ER-093992, ER-010607

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Rsdpfx Aeu E U Hboh Usck Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in the X/Y axes Rjdpfx Ajxpfy Soh Ueck Linear scales in X/Y axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic small-hole detection function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler tä161225

Year of construction: 1985, condition: used, 1 branded engraving machine make KUHLMANN type GM I-I working area: 320 x 200 x 280 stencil table 500 x 400 mm, working table 500 x 200 mm 3D shape engraving device TGV - plate engraving device Div. stencils and type sets Div. engraving gravers Speed range 4.200 - 20.000 min-1 Redpsk Tt Axofx Ah Ueck Space requirement approx. 1.2 x 1 x 1.5 m Weight approx. 250 kg

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, MB ACTROS 2652 STX Motorhome new vehicle Rcsdpfev D Aapox Ah Ujk FULLY EQUIPPED! Three pop-outs, cellar under the apartment, storage compartments around the truck, 6 KW diesel generator, 700 liters of fresh water, 300 liters of waste water, 6-7 sleeping places, living room, extra double bed in the bedroom, large double bed above the driver's cab, 360° video surveillance all around. LG parking air conditioning, Kabola water heater, 2 TVs/satellite, fine wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating group, microwave, refrigerator and freezer, dishwasher, washing machine, external cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, trailer hitch, and much more. Subject to errors/input errors & prior sale. * NET SALE POSSIBLE. * Top leasing offers * Net price domestic plus 19% VAT Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes in the area of horse transporters and trailers. Please make an appointment in advance. under Richard Theurer / Andreas Theurer

Condition: ready for operation (used), Year of construction: 2019, Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available. Rjdpfxotlucne Ah Ujck

Condition: excellent (used), Year of construction: 2016, operating hours: 29,000 h, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, The offered Mitsubishi MP2400 from 2016 represents an excellent opportunity for companies engaged in or upgrading to high-precision wire EDM machining. With a total operating time of approximately 29,000 hours, the machine is in very good condition and fully operational. Demonstration or test runs are available, allowing interested parties to gain a direct impression of the machine’s condition and performance. Machine data & technical features Series specifications: • Control unit: Advance Plus2 • Max. workpiece dimensions (W × D × H): approx. 1050 × 820 × 305 mm • Max. workpiece weight: approx. 1,500 kg • Table dimensions: approx. 840 × 640 mm • Travel distances (X/Y/Z): approx. 600/400/310 mm • Wire changes possible between Ø 0.05 / 0.10 / 0.20 / 0.25 mm • Linear shaft motor drive system offering supreme precision in the micron range (MP denotes the precision package) Special features of this machine: • Operating time: approx. 29,000 hours • Condition: very good, fully functional, demonstration possible • Integrated CAM system directly on the machine (machine programming) Rcodpjxztuhofx Ah Uek • 20-kg wire spool station for less frequent wire changes • Accessories (excl.): 8 clamping bars, various Erowa clamping devices, prisms and custom clamps, ionizer

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Rjdpfowkpxksx Ah Usck - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: good (used), We offer here a used UPC chuck with airdock ER-139501 / ER-078728. Additionally with an adapter pallet compatible with ER-115304 for use on milling, grinding, measuring, drilling and die-sinking EDM machines. The chuck has been cleaned and relubricated by us and is in very good technical condition. Rjdpfx Ahsviul Ie Uock Please do not hesitate to contact us if you have any questions.

Condition: good (used), Year of construction: 2010, clamping force: 500 kN, Engel victory 200/50 spex (2010) CC200 Clamping force: 50 t Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic Redpfx Ajwv Ukieh Uock Hours: 56000

Condition: used, Year of construction: 1952, bore capacity in steel (diameter) / mm arm length / mm workpiece height max. / mm total power requirement / kW weight of the machine ca. / t required space / m Rcsdjrz S Ttjpfx Ah Ujk The pallets lying on the machine are not included in the scope of delivery.