Glass cutting / assembly table

EXPOGLASS ® SDRD

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRD 2L PU PP Manufacturing year 2025 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 900 kg - top surface size: 340 cm x 240 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz Iaodsf Sqffepfx Aadjn DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included 160 kW compressor for 3 mm glass included Iaodsxtf Dfspfx Aadon In good condition.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2022KL2938, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, • Glass cutting table SDRD FULL Tilted table which supports the process of manual cutting the glass, product designed and manufactured in Poland Length - 3400 mm Width - 2400 mm Height - 910 mm Breaking bar - 2 pieces in cross arrangement Bars steering - by foot pedals Air cushion system - installed Power of fans (air cushion) - 2,2 kW Air cushion system steering - by foot pedals and hand button Tilting of the top - pneumatical Stabilization of tilting - by hydraulic speed controller Support of quick tilting - by to gas springs Pull-out cantilevers of glass loading - yes, manually Covering of the top - grey felt Covering of the circumference - ash slats Wheels - 4 rotary, with increased load Levelling feet - 4 pieces installed Iajdpfxsh Nx R To Aadon Steel construction covering - polyurethane covering Filling of the lower beam in stationary construction - vibrated, fibre reinforced concrete Table available from stock. Our company also delivers worldwide.

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: Iaedpfx Aaoqwycljdon X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0370250754, Item 23374 Hydraulic Welding Rotating and Tilting Table – Three-Axis Welding Manipulator Technical Specifications: - Max. load capacity 3000 kg - Faceplate diameter 1000 mm - Min. table height in horizontal position approx. 1070 mm - Max. table height in horizontal position approx. 1970 mm - Faceplate motor-rotatable + swiveling or tilting - Rotation movement electrically continuously adjustable approx. - Right-hand + left-hand rotation - Welding current transmission approx. 700 A - 400 V drive - Connected load 4.0 kW Iedpfsv Rbivjx Aadsan - Hand-held remote control for direction of rotation, swiveling or tilting - Space requirement approx. W 2250 x H 1070 x D 1350 mm - Weight approx. 2000 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom Iaedpfsmgc I Nox Aadjn - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Ijdpevvkqgofx Aadean

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps Iajdpfx Aewcq Hgoadon - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: used, Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm -Plate is with: support ribs -with: 4x adjustable feet -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg Iaedpfxsfc T Tqo Aadon

Condition: new, Year of construction: 2026, functionality: fully functional, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Strong, professional sliding table saw with a movable table on bars and a separately powered scoring. Saw tilts in the 90–45 degrees range Solid, durable design ensures stability and work safety Controllable speed adjustment Technical data Table dimensions 970×550 mm Sliding table length 3200 mm Cutting width by the fence 1200 mm Transverse cutting by the transverse cutting guide 3100 mm Saw tilt 0°–45° Saw diameter Ø350 mm Saw hole diameter Ø30 mm Saw blade height 0–87 mm Saw blade 350 max height 105 mm Saw blade height at 45° angle 0–60 mm Saw blade 350 max height at 45° angle 73 mm Main saw spindle speed 4000 / 6000 rpm Scoring saw diameter Ø125 mm Scoring saw hole diameter Ø20 mm Scoring speed 8000 rpm Iaedpfstz Smisx Aadsn Main motor power 5.5 kW Scoring motor power 0.75 kW Intake connector under table diameter 100 mm Intake connector diameter in the saw guard 80 mm Machine weight 680 kg Available equipment Cutting saw Scoring Transverse cut fence Longitudinal fence Modern - ergonomic saw guard Worktop extension Fence for mitre cutting Saw blade tilt gauge indicator User manual EC declaration of conformity