Refurbished Robot with 1 year warranty

FANUC M-10iA/7L

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Gjdey Diabspfx Akksiu

Condition: used, Year of construction: 2012, x-travel 2134 mm y-travel 1016 mm z-travel 762 mm CNC-control HAAS CNC Table dimensions 2134 x 914 mm max. table load 1814 kg spindle taper SK 50 spindle turning speed range 7500 U/min spindle motor 22,4 kW feed range 1270 mm/min rapid traverse 15,2 m/min tool change unit 30 Pos. coolant IKZ voltage 400 V weight of the machine ca. 13,2 t Gisdpfx Akex E Dn Njkou dimensions of the machine ca. 4,70 x 2,95 x 2,99 m - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR

Condition: ready for operation (used), Year of construction: 2017, Main Drive Spindle Speed 7500 RPM Spindle motor power 22.4 kW Movement X-Axis Movement 2134 mm Z-Axis Movement 762 mm Y-Axis Movement 813 mm Gedpfx Akox Imrpskeiu This 3-axis HAAS VF 7/50 was manufactured in 2017, featuring extensive axis travels with X-Axis at 2,134 mm, Y-Axis at 813 mm, and Z-Axis at 762 mm. It supports a maximum workpiece weight of 1,814 kg and includes a spindle speed up to 7,500 rpm. Ideal for robust machining tasks, consider the opportunity to buy this HAAS VF 7/50 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Giedjx D Rq Ejpfx Akkju Injection Moulding

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis HAAS VF-8 vertical machining center was manufactured in 2003. It features a 1626 x 1016 x 762 mm travel range, a 15.4 kW spindle power, and a maximum spindle speed of 7500 rpm. Equipped with a BT-40 tool holder, a 24+1 position tool changer, and a screw-type chip conveyor. If you are looking to get high-quality milling capabilities consider the HAAS VF-8 machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm • Max cutting feed: 12 m/min • Rapid feed (X/Y/Z): 18 m/min • Tool changer type: Random vertical • Tool magazine capacity: 24 + 1 positions • CNC memory: 1 MB • Monitor: 15" color • Data interface: RS232 • Rigid tapping: Yes • Options/features included: • 2-speed gearbox spindle • 4th axis drive and wiring • Intuitive programming system • Coordinate rotation system • Macro variables and scaling functions • Programmable coolant nozzle Gisdpfjx D H Ruex Akkou • Internal work light Additional equipment • Screw-type chip conveyor Technical Specification Taper Size BT 40

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Gjdpfsu Ti Tvox Akkoiu Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: ready for operation (used), Year of construction: 2006, number of axes: 3, This 3-axis HAAS VF-8 vertical machining center was manufactured in 2006. It operates on a voltage of 360-480, with a phase 3 and frequency of 50/60 Hz. The full load capacity is 20 AMPS, with a largest load of 35 AMPS. Consider the opportunity to buy this HAAS VF-8 vertical machining center. Contact us for more information. • Voltage: 360–480 V Gsdsx D Ep Ajpfx Akkoiu • Phase: 3 • Frequency: 50/60 Hz • Full-load current: 20 A • Largest load current: 35 AInternal cooling 21 barSpiral chip conveyorProgrammable coolant nozzleNew gearbox and spindle installedIn June and July 2024, the following components were renewed:GearboxVector drive, spindle driveDecember 2024: Double arm tool arm

Condition: good (used), Year of construction: 2004, functionality: fully functional, ANAYAK HVM-3300 - Condition: used machine - Year of manufacture: 2004 Control system: - HEIDENHAIN iTNC530 Linear axis travel: - X-axis: 2,700 mm - Y-axis (cross axis): 1,000 mm - Z-axis: 1,050 mm Machine table: - Dimensions: 3,300 x 1,000 mm - T-slots: 7 x 22 mm - Capacity: max. Axis feed rates: - Max. feed X/Y/Z: 10,000 mm/min Milling head and spindle: - 2-axis diagonal milling head 1° x 2.5° - Max. spindle speed: 60 - 3,000 rpm - Max. motor power: 22/30 kW - Tool holder: ISO 50 (DIN69872-B) Gisdpfxey Dr Axs Akksu Cooling and chip removal: - Longitudinal chain conveyor - Through-spindle coolant, 19 bar Additional features: - Movable control console in front of the machine - Enclosure with front doors - Machine documentation

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Gisdoyx U Nwopfx Akkeu

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 814 mm, controller manufacturer: HAAS, number of axes: 4, This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. • Table with integrated rotary table 4th axis • Table dimensions: length 1626 mm x width 814 mm • Rotary table diameter: 762 mm • Tool changer: 30 +1 • renishaw probe included • Last geometry check by HAAS in 2023Machine still under power Additional equipment • Coolant tank with low and high pressure pumps • 2 chip conveyors with screwrenishaw probe included Last geometry check by HAAS in 2023 Gsdpfx Aksx D Eppjkoiu Technical Specification Taper Size SK 50