Beside the press granulator Getecha

GETECHA GRS 300 A1.1.1 (art.10105)

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs Ledjra N A Nopfx Adtehf standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: used, Cooling unit, cooling water chiller, water cooler, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity approx. 6 kW Nominal power of cooling unit: 3 kW Refrigerant R422D Water tank capacity approx. 35 liters Lodpopu R Ncefx Adtshf Circulation pump flow rate: 40 liters/min Pump power: 0.63 kW Water connections: 1/2 inch Power supply: 380 volts, 50 Hz - Temperature adjustment via rotary potentiometer Space requirements: L x W x H 1100 x 750 x 140 mm Weight: 285 kg

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Lhjdpsucw S Sefx Adtef

Condition: used, Year of manufacture 2003 Lhjdpfx Adow Upn Estef 2.2 kW 3.0 HP including documentation, COC

Condition: new, Year of construction: 2025, Brand/Manufacturer: 3E Machinery Lhjdpfxovpua So Adtef Model: GL32120 Main motor power: 30kW + 30kW Working rotor length: 1200 mm Rotor diameter: 430mm Number of movable knives on the rotor: 30 pcs Thickness of knives: 40mm Machine on stock

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Excellent condition Approx. 450 operating hours. Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Refurbished condition: – New paintwork Includes: control cabinet, frame & hopper Lhodpfx Adoyrfgretof

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram Ledpex A U Ncsfx Adtohf o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Year of construction: 2022, condition: new, functionality: fully functional, overall weight: 9,500 kg, total length: 2,750 mm, total width: 2,670 mm, total height: 4,630 mm, rotational speed (min.): 520 rpm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Grinding space : 1200 x 1100 mm Drive motor power : 110 kW Lhodporbk Hcofx Adtef Knives on rotor : 7 x 2 Fixed knives : 2 x 2 Weight : 9500 kg The GXC series of mills, using motors from 55kW to 315kW, is specially designed for high efficiency of the grinding process. Thanks to a variety of rotor configurations, these mills have a wide range of applications for small and hollow materials such as plastic drums, crates and chairs, very flexible materials such as foils, big bags, and rubbers. They are also suitable for grinding thick and hard materials such as plastic board profiles. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Unused machine available on hand, possible tests before purchase. (dozens of machines in stock) If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Condition: excellent (used), Year of construction: 2007, Arburg 320C 500-100 (2007) Clamping force: 50 t Screw diameter: 25 mm Lodpsu Dmgqsfx Adtohf Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language

Year of construction: 2004, condition: good (used), 1x Rapid GK2218 ( 1987) 1x Rapid 1521A ( 1996) 1x Rapid GK205A ( 1989 ) 2x Rapid 1521A ( 2004) Lsdpfeitvbpjx Adtohf