Pressure vessel

GLASS VAS 300

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Kfedpfxedrc Txo Ah Uea Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: used, Ulma Atlanta High speed flow packing line possible with shrink film and shrink tunnel. Bottom Seal Kedjq Dvxxspfx Ah Usfa

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m Kfodpfxofn Iudj Ah Uea 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h

Year of construction: 2013, condition: ready for operation (used), A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer for printing trays from REA Jet in the outfeed of the machine, has been serviced regularly, including documentation and spare parts. Kfedpfxji Atnxj Ah Uea

Condition: good (used), Year of construction: 1995, 551 kW Year of construction 1995 incl. concrete garage with silencer and additional oil cooler Engine condition: good (approx. 64,000h) Complete engine overhaul in 2017 at 48,500h Kfodpfx Ahovcm Nfs Uoa Turbocharger overhauled at 60,000h Concrete garage/container: 9x3x4m (LxWxH) Offer is without guarantee of availability

Year of construction: 2016, condition: reconditioned (used), overhauled, delivery time by end of January 2026, 12-month warranty - Max. temperature 200°C; temperature can be increased to 250°C upon request - Internal dimensions: W 1000 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Equipped with Jumo Dicon Touch controller - Loading rails for charging the oven - Heating capacity: 36 kW - Net weight: 780 kg - Exhaust nozzle; exhaust fan and electric damper can be retrofitted upon request - Charging trolley available on request (see photo) - Documentation, CE declaration We are happy to offer installation and commissioning as an additional service. Inspection by appointment in our warehouse. Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, tempering oven, pre-heating oven, tempering oven, drying cabinet, chamber kiln, curing oven, recirculating drying cabinet, recirculating oven Kedpfsvk Navjx Ah Uefa

Condition: excellent (used), Year of construction: 2008, operating hours: 87,000 h, functionality: fully functional, overall weight: 775 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, fuel type: electric, volume flow: 190 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, Manufacturer: Kaeser ASD 32T screw compressor + refrigerant dryer serviced throughout!!! complete documentation Year of construction: 2008 Nominal pressure: 8 bar air flow: 3.16 m3/min air flow: 189.6 /hour Kfjdsi E H Ikjpfx Ah Uoa operating hours: Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400V/3PH, 36A Power: 18.5 kW engine speed: 2945/min Ambient temperature: 3 / 45°C machine weight: 745 machine dimensions: 1,770 x 900 x 1,530 mm

Condition: excellent (used), Year of construction: 2015, usable tank capacity: 500 l, Heatable mixing tank Volume: 500 liters Year of manufacture: 2015 Condition: Excellent The tank is equipped with a fully functional agitator and a pressure jacket. The water circuit of the double jacket features a heating element and a circulation pump to circulate the water within the jacket, ensuring that the product in the tank is heated quickly. Ksdjw Dr I Iopfx Ah Uofa Provision for an inlet/outlet pump is available; the controls are already installed in the control cabinet. Suitable for heating liquids up to just below boiling point. Technical drawings available. Dimensions (LxWxH): 1500mm x 1100mm x 2050mm

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Kedpfeu R Szaex Ah Uofa Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. Kedpjwnx H Ejfx Ah Uofa As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom.