Front sweeper

GMR FF 1200P

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week Gtedpjdad Adjfx Abdjt Price excl. shipping We provide invoices with 0% of tax.

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity welding positioner, CE certificate. Very robust design. Infinitely variable speed from 0.05 to 0.7 rpm, higher speed available on request. Turntable diameter 1200 mm. Tilting up to 120°. Height horizontal 950 mm, tilted to center 720 mm. Hand and foot remote control. Dimensions: length 1.35 m x width 1.2 m. Gtsdpfxod A Etuo Abdjt

Condition: used, Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, Processing and dosing system for green waste, wood chips and fuel from biomass consisting of: - 2 x feed hopper 1,500 x 8,000 mm, with dosing and equalization stages - Drum screening system 2,300 x 7,000 mm, screening drum 15 mm² - Overband magnetic separator Permanent magnet - Disc separator 1,500 x 4,500 mm, separating cut 15-100 mm² Gjdpfxotynfte Abdstt - Elevation, steel construction - Conveyor belts, distribution belts - Switch cabinet with control system Manufacturer: Rudnick & Enners Project no.: AF4 167 C Year of construction: 2015 Operating hours: approx. 11,000 h Location: Hesse (Germany) Availability: August 2024, by arrangement Service details: The system is in very good technical condition. Warranty: The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects All prices are ex works, net plus VAT, excluding dismantling, packaging, transportation and crane provision! We reserve the right to prior sale, changes and repairs. This overview is for your information only and does not constitute a binding offer.

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Includes the following components, among others. - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos - Bucket weigher - Dosing screws - Elevators - bunkers - Switchgear cabinets Gtedpfsq Hr Rzox Abdst

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. Gedpfxenl Nqqj Abdett A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 24 h, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 1,718 mm, fuel type: electric, mast type: triplex, construction height: 2,643 mm, fork carriage width: 1,750 mm, fork length: 1,200 mm, empty load weight: 5,814 kg, total length: 1,600 mm, drive type: Elektro, construction width: 1,540 mm, Four-way sideloader Load center: 600 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tires type: solid rubber Godpsv Tf Arefx Abdjtt Front tires size: 406 x 176 mm Front tires condition: 80 - 100% Rear tires type: solid rubber Rear tires size: 559 x 254 mm Rear tires condition: 80 - 100% Battery voltage: 48 V Battery Ah: 930 Ah Battery year of manufacture: 2025 Battery condition: new Integrated sideshifter (+/- 100 mm) Hydraulic fork positioner (closed width 290 mm, maximum open width 1,750 mm) (from outside to outside at Forks) 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, full free lift, CE certificate, safety light, LED work lights (2 forward and 2 side), flashing light, reverse alarm. Color: Combilift Hi-Vis Green (RAL 6018) and Gray. Auxiliary hydraulic control valve with 2 hoses ending at the fork carriage.

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, 10-ton container turning device, self-centering roller stand 380 V, continuously adjustable speed from 200 to 1200 mm/min. For diameters from 300 mm to 3500 mm Roller diameter 270 mm x 120 mm Temperature resistance of the support rollers: 100°C Dual drive Gtodog Sz Urepfx Abdjt With hand and foot remote control, complete set Digital speed display

Condition: new, Klanke roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Blade protection -Emergency stop rip cord -Siemens SPS Technical data: Gtsden Hyxlopfx Abdet Blade length: 1500mm Cutting channel opening: 1200mm Motor power: 7,5kW Cutting force: 30to Ordered goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: good (used), -1Pc. Metso M&J 4000-8 Shredder . With Hydraulic power-unit and control-panel in container. Gedpjxhlfrofx Abdstt With conveyor for output material and inlet hopper.

Condition: as good as new (ex-display), Demonstration Machine The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Technical Data: Max. log diameter: 1000 mm Max. board width (plank width): 850 mm Max. saw blade rise: 875 mm Min. cutting height: 30 mm Max. frame clearance: 450 mm Gjdpfovrvqwox Abdjtt Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Extras not included in the price. (Image for reference only)