Rotary table

GSA CNCT320

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox Lrodpfx Aszkbiroh Sju For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 Ljdpfx Aoiq Hxvsh Seru 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Ljdpfx Aowv Hnmoh Ssru Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Technical details: Tool holder shaft type: BT 40 Tool holder shaft type: Futter / Chuck Tool holder shaft type: Weldon Lrjdpfx Ahovfdr Ns Ssu Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Chucker etc. available. See pictures. *

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm Lrjdpfx Asgvkkteh Sju table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 873 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, empty load weight: 7,850 kg, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Lredpfx Asvgh U Reh Sou Load center: 600 Mast type: Duplex Technical condition: good Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Sideshift, 3rd valve, 4th valve, front working lights, heater, full cab, CE certificate, safety light,

Year of construction: 1999, condition: excellent (used), 600 KG 10 BAR Lrjdpfjxy Ikbsx Ah Ssu

Condition: good (used), Year of construction: 2004, HSK 63 Ljdpfx Ajznmifsh Soru 18.000 rpm Parts shown by hand not come.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator Lsderkmv Sopfx Ah Seru MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Lrjdpsp U Umkefx Ah Seu