Hydraulic cylinder

GSL German Standard Lift D040025AAV10140

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder with valve block -Type: D040025AAV10140 T08 Cedpfx Abovt Sryerohd -Stroke: 140 mm -Piston rod: Ø 25 mm -Receiver. Ø 20 mm / Hole spacing 320 mm -Dimensions: 360/200/H80 mm -Weight: 7.6 kg.

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Chjdpfotqfhxsx Abrod Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV30290 S46 -Stroke: 290 mm -Piston rod: Ø 50 mm Cjdpfx Ajvt Sv Ssbrjhd -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H220 mm -Weight: 38 kg.

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor, bevel geared motor, bevel geared motor -Condition: unused -Manufacturer: SEW-Eurodrive, bevel gearmotor with brake -Type: K77 DRE132MC4BE11/TF -Translation: i= 7.24 Codpot Ult Ajfx Abrehd -Speed: 203 rpm -Power: 7.5 kW -Protection class: IP55 -Shaft: Ø 50 x 100 mm on both sides -Brake: 55 Nm -Number: 1x motor available -Price: per piece -Dimensions: 860/410/H290 mm -Weight: 132 kg/piece

Year of construction: 2004, condition: good (used), TR 800 LIGNUMA circular sawmill - for prisms - user manual Cedpfxsktg Sho Abrohd – feed on the inverter TECHNICAL PARAMETERS: horizontal clearance 480 mm vertical clearance 300 mm min. length of the processed material 1300 mm cutting width 65 - 340 mm height of sawn material 10 - 280 mm the ability to work on 2 and 4 discs type of saw Ø 800 mm power of the main drive motor 37 kW power of the feed drive motor 1.1 kW length of the feeding table 3200 mm receiving table length 2500 mm total length of the machine 7200 mm machine width 1000mm machine height 1060 mm weight 1850 kg The main advantages of the machine: – stable structure – produced by the Polish reputable brand LIGNUMA – a leader among sawmill manufacturers - recommendable – for every professional

Condition: good (used), Year of construction: 1998, Hacker with horizontal infeed and conveyor belt in standby mode. Low-speed operation results in very low noise levels. Cjdpfxegmn Amo Abrohd Maximum width: 300 mm. Maximum height: approx. 30 mm. Motor: 18.5 kW. 115 rpm. Ideal for use alongside a panel saw for cutting long strips.

Condition: reconditioned (used), Year of construction: 1996, machine/vehicle number: 16319, Max. processing dimensions: 220 x 120 mm (Max. raw timber dimensions: 230 x 130 mm) Min. processing dimensions: 15 x 6 mm Automatic positioning system: "Hecht-Posiomat" Feed rate: 6 - 22 m/min. Feed roller pressure: 6 bar Spindle diameter D = 40 mm Max. chip removal: 10 mm Infeed table: 2,000 mm Feed motor: 2.2 kW Height adjustment: 0.37 kW Cjdpfeh Euvmox Abrohd Surfacing spindle: 4 kW Jointing spindle: 4 kW Left profiling spindle: 4 kW Thicknessing spindle: 5.5 kW Glazing bead trimming Ex works, from the Seevetal location In "as is" condition, as inspected Subject to prior sale Excluding freight and packaging

Condition: new, next inspection (TÜV): 09/2026, loading space length: 8,000 mm, loading space width: 2,000 mm, loading space height: 540 mm, total width: 2,000 mm, tire size: 23x9-10, tire condition: 100 %, color: orange, Year of construction: 2026, Platform trailer Payload: 10,000 kg Length of loading platform: 8,000 mm Width of loading platform: 2,000 mm Height of loading platform: 540 mm Loading platform floor: 30 mm Douglas fir, recessed and screwed Tie-down eyes: 5 per side Paint finish: RAL 2000 Drawbar with height adjustment and safety locking mechanism Double-acting support leg Tires: Superelastic 23x9-10 with steel rim and tapered roller bearing All-wheel steering Chsdpfx Abeit Twujred Track and steering rods adjustable with ball joints

Condition: excellent (used), functionality: fully functional, Base plate for Esterer sash cutters type SS 71 or HD 71 with main shaft and bearings. Equipped with full and idle pulleys. Chedjth Udmjpfx Abred

Condition: new, Year of construction: 2023, Debarker reducer disc with 5 or 6 knives, diam range 200, 300, 400 mm Cedpfx Abskhcx Ssrohd