Parts Gutmann AGS SWL501

Gutmann

Year of construction: 1995, condition: ready for operation (used), A Gutmann blasting system completely overhauled by Rösler in 2019 is available. Documentation available. On-site inspection is possible. Fedpfxjwftcpj Ahpsgd

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm Fodel Tuvdopfx Ahpogd -Own weight: 356 kg

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm spindle cone ISO: 40 (SK 40) table surface area: 760 x 420 mm table feed: längs: 10 - 500 (Eilgang: 1,4 m/min.) mm/min table feed: vertical: 5 - 250 (Eilgang: 1,4 m/min.) mm/min spindle turning speed - continuous: 32 - 1600 / 18 step U/min spindle head swivable left - right: 10 ° links / rechts ° quill stroke vertical: 125 mm feed continuous: 10 - 500 / 8 step mm/min rapid traverse: 1,4 m/min Total power requirement: 6,5 kW weight of the machine ca.: 3,0 t dimension machine xH: 2,3 x 2,0 x 1,85 m Fgodpfx Ahjvc Avhopod Further features: Headstock projection min./max.: 2094 / 2544 mm Equipment: -cooling water pump with feed -Linear path measuring system - Heidenhain ND750 Accessories: -Machine vice *

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm Fgsdpfx Ahju Rqabspsd turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Fgodpfx Aov Rwu Ushpod Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t Fgjdpfx Ahovzxphjpjd dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Year of construction: 2000, condition: good (used), used drum shot blast machine Fsdpfx Ahjmza S Eepsgd Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control. Fsdpsu Rt Nrefx Ahpogd

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. Fgsdpfx Aovkf Agshpod The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Condition: used, x-travel 600 mm y-travel 400 mm z-travel 500 mm Fgedpfowqrxmex Ahped total power requirement 6 kW