Horizontal machining center

HAAS EC-400

Condition: excellent (used), Year of construction: 2015, operating hours: 5,000 h, Equipment: chip conveyor, documentation/manual, The Haas EC-400, designed for large-scale production and unmanned operation, is in excellent condition Nodpfx Afjvzltteascn Year of manufacture 2015 Operating hours 4550:55:55 Has been in the same place for 10 years! Machine equipment: 2APC - Automatic pallet changer, pallet 400x400mm 12K - 12,000 rpm high-performance spindle VDRIVE - Vector Drive spindle drive with 22.4 kW drive power SMTCH40 - Side tool changer 40+1 stations. SK-40 BS - Separate tool loading station 4AX - Full 4th axis 0.00 1 ° programmable WIPS - Renishaw tool and workpiece measurement TSC - Internal cooling through the spindle 20 bar AF - Fine filter system 25 µ for internal cooling PCOOL - Programmable additional coolant nozzle CONVEYOR-H - Chip disposal system worm with hinge belt conveyor RTAP - Thread cutting without compensating chuck KEY - Key switch for program lock LCD15 - 15 inch LCD monitor with USB interface Machine can be viewed under tension in Upper Austria by arrangement. The buyer takes care of transport. Technical data, accessories and description of the machine are non-binding

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 172822052, functionality: fully functional, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Ncodpfxjt Dmlfs Afajn Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: excellent (used), Year of construction: 2005, Travels X-travel 559 mm Y-travel 635 mm Z-travel 559 mm Spindle Max. rated power 22.4 kW Max. speed 8100 rpm Max. torque 122.0 Nm 2000 rpm Drive system: Inline direct drive Taper: CT40 / BT 40 / HSK-A63 Bearing lubrication: Air/Oil Injection Cooling: Air-cooled Integrated 4th axis (B-axis) 90° rotation time (full 4th) 3.0 s Max. load capacity on clamping surface 400 kg Rotational torque (continuous) 575 Nm Backlash 30 arc-sec Gear ratio 106:1 Braking torque 3390 Nm Minimum resolution 0.001° Switching accuracy ± 15 arc-sec Repeatability 10 arc-sec Rapid traverse speed at B 150° sec Feed rate Max. feed for machining 21.2 m/min. Rapid traverse speed at X 35.6 m/min. Rapid traverse speed at Y 35.6 m/min. Rapid traverse speed at Z 35.6 m/min. Axis Drives Max. X Thrust 15035 N Max. Y Thrust 12500 N Max. Z Thrust 15035 N Tool Holder SK 40 Coolant Tank Capacity 360 L Tool Changer Capacity 30+1 Tools Ncodpfjwmmz Uex Afaon Max. Tool Diameter 64 mm Max. Tool Length 305 mm Max. Tool Weight: 5.4 kg Tool-to-Tool Change Time: 2.8 s Chip-to-Chip Change Time: 3.6 s Air Requirements Required Air Flow† 255 L/min. 6.9 bar Air Hose (inline) 1/2 in. Air Coupling 1/2 in. Minimum Air Pressure 6.9 bar Electrical Specifications Spindle Speed 8100 rpm Inline Direct-Drive Drive System Spindle Power 22.4 kW AC Input Voltage (Three-Phase) – Low 220 VAC Full Load Current (Three-Phase) – Low 70 A AC Input Voltage (Three-Phase) – High* 440 VAC Full Load Current (Three-Phase) – High* 35 A * The "High" specifications refer to machines designed for higher input voltages. Dimensions Length x Width x Height 4800 x 2540 x 2840 mm Weight 7947 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, HAAS EC 400 HORIZONTAL MACHINING CENTER 4 AXIS OMEGA DESIGN SOLUTIONS UK Use 15 Haas machines to manufacture high precision components for the Aerospace and race car markets. We use Haas machines from VF1 to the mighty UMC750SS. We have used Haas machines for 15 year and feel they are the best in the market. This EC400, twin pallet horizontal machine The tooling is bt40 , there are tools included in the sale. Ncedpfxox Urc Ts Afajn We can demonstrate the machine or set it up to make your parts if required. 2008 machine ready for work Terms and conditions apply

Condition: new, Year of construction: 2023, functionality: fully functional, with 8 pallets Fanuc M-Pro1 (0i-MF Plus) control system Travel X/Y/Z: 800/800/860 mm Rapid traverse X/Y/Z: 74/74/74 m/min Pallet size 500 x 500 mm Load capacity: 550 kg per pallet Workpiece size: Ø800 x H1,000 mm Tool holder: BBT 40 Number of magazine positions: 220 Max. Tool diameter: Ø95 mm Max. Tool diameter with free neighboring pockets: Ø185 mm Max. Wkz. length: 400 mm Max. Tool weight: 8 kg Spindle cone: BBT40 Big Plus™ Speed: 15,000 rpm Ncjdpfjuafl Ijx Afajn Chip spirals on the right and left in the machine Coolant through the spindle Dual chip conveyor Fully-fledged 4th axis from PARKSON 50 kvA transformer

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 600 mm, The machine is a fully functional, continuously controlled 5-axis unit. It was commissioned in 2010. Control system: HEIDENHAIN I TNC 530 + universal KINEMATICS. Tool magazine with 48 positions. Direct measurement in all 5 axes. The machine was used for single-shift, piecework operation. The machine is still occasionally used up to today. It is still connected and can be inspected under power. The model is still being produced with the same technical specifications. New chip conveyor installed. Spindle speed: 15,000 rpm. Workpiece probe: Renishaw + tool probe: BLOOM (laser) – both highly precise. The machine is equipped with a LOSMA oil mist separator. The machine is reliable. The spindle was replaced (not refurbished, but brand new) approximately 5 years ago by an authorized service provider. Accessories included: five-axis vise and 48 various clamping devices (almost full equipment). New LED lighting installed. The machine is excellently maintained and, for its age, is truly in outstanding condition. Ncodpfoymg Iysx Afaon