Sorting machine

Hamos 1010-0

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order. Nlsdpfx Aaeua Tbwszeg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 330, rotational speed (max.): 2,900 rpm, motor model: 5,5kW, Equipment: CE marking, STYROFOAM/STYRODUR GRINDER KP2 5.5 kW three-phase 400V electric motor Circuit breaker 1:0, power cord, 5-pin 16A plug 500 mm diameter grinding drum with hopper feed two granulate outlets with rubber clamps single-direction rotary knife with double blades Nedpfx Aoy Nantsazelg 13 mm diameter screens positioned around the grinding drum operating capacity min. 4 m³/h The crusher allows the resulting granules to be bagged directly into bags or plastic sleeves, which are secured to the outlets using elastic rubber straps. All our shredders come with complete technical documentation (DTR), CE certification, and professional operating instructions

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc. Nsdpeqi Eh Hsfx Aazjlg

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 Nlsdpfx Aotqfhxoazog The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: good (used), Pulsotronic magnetic separator (operating manual available) Magnetic separator for use with, e.g., material vacuum cleaners New price: €4,850 Nodpfsd Dpvhex Aazolg

Condition: used, functionality: fully functional, type of input current: AC, input voltage: 220 V, Equipment: lighting, For sale: a corona roller separator from hamos, Model: KWS 1010-1 Nljdpfx Asyhcqyjazsg - Year of manufacture: approx. 1998 - Approx. 500 operating hours - Used exclusively for trials and testing, never integrated into a production facility; thus, very little wear - Technically fully functional Application areas - Electrostatic separation - Plastics and recycling applications - Material testing, production Special features - Robust industrial construction - Standalone machine with controller - Ideal for laboratories, development departments, or pilot plants Sale as inspected Inspection by appointment possible

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Njdozhg Eyjpfx Aazelg Hydr. feed pressure device (HNDE), feed hopper, Available from approximately the end of August.

Condition: ready for operation (used), We offer a ready for use hamos EKS 1031 electrostatic separator for plastics. This machine is designed for efficient separation of mixed plastic materials using electrostatic technology. Ideal for recycling and industrial processing applications. Condition: ready for use Nljdoyv Hzaopfx Aazog Voltage: 400 V Frequency: 50 Hz Type: EKS 1031-0 The machine is in good working condition. Inspection possible. Location: Lithuania For more information, please contact us.

Condition: ready for operation (used), For sale: conveyor belt as shown in the photos. Length: 4 m. Belt width: 0.4 m. Ready for use. Please feel free to contact me for more information. Nledpfx Aow Dx T Doazog

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 16951-3.3, input voltage: 400 V, overall weight: 22,000 kg, input frequency: 50 Hz, We offer this used Eldan Recycling HR162T-33 machine, model ELDAN HR 162T-33, manufactured in 1999. Year of manufacture: 1999 Power: 162 kW Weight: 22000 kg Serial number: 895153 Voltage: 3 x 400 V Frequency: 50 Hz For sale: an industrial ELDAN Granulator 160 (year of manufacture 1999), designed for shredding rubber in recycling processes. The machine comes from a complete tire or cable recycling line and is in very good technical condition. IT IS POSSIBLE TO PURCHASE THE COMPLETE LINE. The machine is sold complete with interchangeable screens of various sizes (min. approx. 8 and 10 mm), frame, drive, and accessories as shown in the pictures. The device is designed for industrial screening and material separation. Application: CABLE AND ALUMINUM RECYCLING, rubber granulation, tire recycling, rubber and aluminum granulate production, material preparation for further separation. Advantages: reputable manufacturer ELDAN Recycling, robust industrial design, suitable for continuous operation, high reliability, easy integration with existing technological lines. The granulator can be sold separately or as part of a complete tire recycling line, which is also available in our offer. Inspection is possible by prior arrangement. We provide assistance with loading. Additional photos, videos, and technical documentation are available upon request. Incoterms: EXW – Poland ELDAN GRANULATOR 160 – INDUSTRIAL RUBBER GRANULATOR ELDAN Granulator 160 (Year of manufacture: 1999) for sale. Nedpezmvclsfx Aazolg Industrial granulator designed for rubber size reduction and tire recycling applications. The machine comes from a complete tire recycling plant and is in very good technical condition. Applications: aluminum granulation Rubber granulation Tire recycling Rubber granulate production Material preparation for further separation Key Features: Manufactured by ELDAN Recycling Heavy-duty industrial construction Designed for continuous operation Reliable and easy to integrate into existing recycling systems The granulator can be sold separately or together with the complete tire recycling line, which is also available for sale. Inspection is possible by appointment. Loading assistance is available. Additional photos are available upon request. Incoterms: EXW – Poland