Horizontal Stack Delivery with pressing - marking

Heidelberg SBP 46.D + MKE.D

Year of construction: 1998, condition: like new (used), VAN DAM 568 COM III 8 COLOUR CUP PRINTER 560 COM III 8 COLOUR CUP PRINTER, the machine is in good condition. The specifications are listed down below. Machine Type: Cup printing machine Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Cpodeh Ha I Ejpfx Abuou Condition: In good condition If you have any questions about the machine or it's specifications you can always contact us.

Condition: used, Year of construction: 2008, machine/vehicle number: 1, Schwertfalzwerk Eigensteuerung - Mobile Knife Folding Unit SelfControl MBO Z6 Year 2008 - Serial-No. 101682080415 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 160m/min Produktivität / Productivity 15.000 cycles/h Antriebsregelung / Drive control MC Control with potentiometerAuf Anfrage Koppelbox MC Control auf Navigator / On request Couple Box MC Control to Navigator Cedpfx Ajivbbzobuopu Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2011, Three knife trimmer Cpjdpswpfv Aofx Abuou Wohlenberg Trim-Tec 45i Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2007, The Heidelberg Stahlfolder TH 82/6-4-2 - RFH, manufactured in 2007, is a high-quality folding machine with a size of 820 mm. Currently dismantled and located in Germany, this machine features a rotary feeder RFH-82. It includes three stations: the first station has 6 folding pockets of 82 cm with automatic pocket setting, the second station has 4 folding pockets of 66 cm with automatic pocket setting, and the third station has 2 folding pockets of 56 cm with automatic pocket setting. The machine also includes a stacking delivery SBP 66, a touchscreen monitor, and an MCT control system. The specific model is identified as TH82/6/4/2 with the machine number O-00951. Format: 820 mm Equipment: Rotary feeder RFH-82 1.station: 6 folding pockets 82 cm Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Stacking delivery SBP-46+ MKE+VE Cpjdjwnft Sjpfx Abusu Touchscreen-Monitor, MCT-control-system

Condition: good (used), Sumbel Enano 150 gluing machine The machine is fully operational ready for production. Like a new one. It is the most valued brand among small gluing machines. An ideal solution for the production of covers, decorative packaging, etc. Production Germany. The machine works on cold glue Copper cylinders. Smooth adjustment: glue thickness, gap thickness. A set of separators, Simple cleaning without the need for tools. Working width 150mm Cpjdeu Umapepfx Abusu 230V power supply Weight 30kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Cpjdpfxjww E Nrj Abueu Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 3010-015, Equipment: documentation/manual, Trivet in excellent condition. Possible purchase of a device for rounding corners Expected price 15 K euros, but I will consider any reasonable offer Codpfxewf Rbie Abujpu

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Csdpfx Aetyy Sfobuopu Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Year of construction: 2006, condition: good (used), machine/vehicle number: 1452, Control panel with display Cjdpfsk Izqtjx Abujpu

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm Codpfx Ajdyky Tsbuepu max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm