Folding Machine

Heidelberg Ti 40/4-SAK

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station Djdpfx Apjx Dkk Sjmjkw - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), Year of construction: 2000, Format range: Envelopes min./max.: 114x176mm/254x324mm, Booklet min./max.: 114x127mm/270x360mm, Pockets: With center seams min/max: 114x178mm/330x406mm, With side seams min/max: 114x178mm/254x406mm. Output: Dextrin or peel and seal: 600/min, latex gumming: 400/min. Documentation available. On-site inspection is possible. Dedpfxjv Rp R Uo Apmjkw

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Djdpfx Ajwcqw Sopmskw Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Dksdpfxexlngaj Apmew Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Year of construction: 1999, condition: used, Palletfeeder PD 78-T 4 Pockets 4 Pockets (BUH 56) 2008 6 Pockets (MAD-66/6-T) 2001 Pressdelivery SBP 46 Stahl SAK 78.S Stream Delivery Stahl VFZ 52.2 Mobile Knife ( 1996) Dkodpfjk Izq Njx Apmjw

Condition: used, Year of construction: 2006, 38 Mio. prints approx. Format: 370×520 mm (14×20″) Dodezzwrdspfx Apmokw Easyplate CP-Tronic, Alcolor Streamfeeder Low-pile delivery Perfecting Powder sprayer Available: at short term

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 027012, Flatpile Feeder 4 Pockets 1 Knife 1 Side Pocket Cleaned Dkodpfx Apsf Swnlemsw

Condition: used, Hohner universal stitching head 52/8 - 6er ring eyelet - Dkedpfofc Rx Tsx Apmew for round wire No. 24 - 26 - with various accessories acc. pictures condition as shown in the photo

Condition: ready for operation (used), functionality: fully functional, The Horizon APC-61II is a high-precision programmable hydraulic guillotine, designed for professional print and finishing environments that demand reliability, productivity, and ease of use. Thanks to its hydraulic cutting and clamping system, this machine ensures consistent, high-quality cuts even for demanding jobs. Its intuitive touchscreen interface allows for straightforward operation, without the need for highly specialized personnel. The equipment features an advanced programming system capable of storing up to 99 jobs with 99 steps each (a total of 3,000 steps), optimizing repeatability and reducing setup times. The backgauge positioning, driven by a servomotor, ensures ±0.1 mm accuracy, guaranteeing precise results with every cut. 🔧 Key features - Hydraulic cutting and clamping system - Intuitive, easy-to-use touchscreen display - Job programming with memory (99 programs) - Automatic backgauge positioning via servomotor - Clamp pressure adjustment from 4.9 to 16.6 kN - Pre-clamping foot pedal for cut verification - Front adjustment of blade angle and depth - Safety system with dual push buttons and automatic return - Optional: safety beam guard 📐 Technical specifications - Cutting width: 610 mm - Cutting height: 100 mm - Insertion depth: 620 mm - Precision: ±0.1 mm - Cutting speed: 3.1 seconds - Eject length: 20 – 150 mm - Power supply: Three-phase 200 / 220 / 400 V – 50/60 Hz - Dimensions: approx. 1,078 x 1,480 x 1,440 mm 💡 Advantages - High precision and repeatability - Easy operation (ideal even for non-expert operators) - High productivity thanks to programmability - Robust and durable construction - Perfect for print shops, copy centers, and bookbinding 🎯 Applications - Cutting of paper, cardboard, and printed materials - Publishing production - Professional graphic finishing Djdpfx Apjywtyrsmskw - Medium and long print runs

Condition: ready for operation (used), PM 74-4 -fully equipped Year 2005 Autoplate Washing Straight 65 millions Low pile delivery Available immediately Dkedj Agwi Tepfx Apmew