Universal machining center

HERMLE C 600 U

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: HEIDENHAIN TNC430 X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 450 A-axis travel mm: +/- 110 C-axis degrees: +/- 360 Number of pallets: 1 Table dimensions mm: - Max. table load kg: - Feed rate mm/min X, Y, Z: 20,000 Iodjxak A Hopfx Ah Ujtr Max. rapid traverse m/min X, Y, Z: 35,000 Spindle speed rpm: 50 - 10,000 Spindle power kW: - Taper type: ISO-SK40 Torque Nm: - Tool changer type: Chain Tool changer positions: 30 Max. tool diameter mm: - Max. tool diameter with adjacent pockets empty: - Max. tool length mm: - Max. tool weight kg: - Coolant tank capacity l.: - Through-spindle coolant bar.: - EQUIPMENT: Zero-point clamping system: EROWA MTS / EROWA MTS RENISHAW OMP60 probe MACHINE DIMENSIONS Length mm: 2,130 Width mm: 2,300 Height mm: 2,750 Weight kg: 6,500

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping Iedpfx Ahjxcgtgs Uotr - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: good (used), Year of construction: 2000, Description FOR SALE 4TH Hermle C 600 U machining centre 5 AXIS YEAR 2000 CNC Control: Typically equipped with a Heidenhain TNC 430 system, which was the benchmark for 5-axis machines of its era, or sometimes the newer Heidenhain iTNC 530 system. Axis Configuration: 5 simultaneous axes (if option chosen), with integrated tilting rotary table. Machining Travels (X/Y/Z): X: 600 mm Y: 450 mm Z: 450 mm Spindle Speed: Often fitted with a 15,000 rpm or 16,000 rpm spindle for high-speed machining (HSC). Iedpfjx E Ryrsx Ah Ujtr Spindle Taper: SK 40 or HSK 63. Tool Capacity: 30-position automatic tool changer. Weight: Approx. 6,500 kg, testifying to its solid, stable construction. BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), Year of construction: 2001, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Spindle speed range 15000 Number of axis 5 Movement X-Axis Feed Force 30000 m/min Y-Axis Feed Force 30000 m/min Z-Axis Feed Force 30000 m/min Media Chip conveyor Yes Additional Equipment Oil mist extraction Electronic handwheel Chip flushing gun Machine bed flushing NC swivel table Blow-off device Closed roof 200-liter coolant tank Includes 24 pallets and MTS-Chuck S-P/A clamping device. Iodpfx Aex D Iywsh Ujtr This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, extended X-axis of 2010 mm, C-axis rotary table, spindle speed up to 15,000 rpm, and a 30 tool capacity. Includes a chip conveyor and a 200-liter coolant tank. If you are looking to get high-quality automation capabilities consider the HERMLE C 600-U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 164 h, working width: 3,100 mm, operating speed: 8 mm/s, reverse speed: 75 mm/s, overall weight: 10,500 kg, total length: 4,500 mm, total width: 1,700 mm, total height: 2,500 mm, input voltage: 380 V, pressing force: 200 t, power of the servo motor: 15 W, With manual, part list and all available technical documents. Isdpfx Aevm Elaoh Ustr

Condition: used, Year of construction: 2000, travel -x axis 600 mm Isdjv T Nr Repfx Ah Ujtr travel -y axis 450 mm travel -z axis 450 mm control HEIDENHAIN - TNC 430 turning speeds 10.000 U/min numbers of positions in the tool changer 30 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 600 U equipped with a 30-tool changer, a swivel axis, and an NC combination table (600 x 370mm / ø 280mm). The machine has approx. 17.754 H spindle hours. Additional equipment: - Swivel axis - NC combination table (600 x 370mm / ø 280mm) - Probe system (SK 40 - RENISHAW) - Tool breakage monitoring The machine is in well-maintained condition, has been used exclusively for educational and training purposes. For further technical details, please refer to the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 600 | C600 | C-600 | C600U

Condition: good (used), Year of construction: 1999, HERMLE C600 U 5 AXIS MACHINING CENTRE WITH HEIDENHAIN ITNC430 CONTROL UKUK Table Dimension Ø280mm (4 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=600mm, 'Y'=450mm, 'Z'=450mm, 'B'=220° (±110° ), 'C'=360° . Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. 30 Position ATC. S/No. 12859 (1999). Itjdpfx Aox A Hgtsh Usr

Condition: excellent (used), Year of construction: 2000, DESCRIPTION Hermle C 800 V CNC vertical machining center was built in 08.2000 in Germany. The milling center operates in three axes and the maximum X / Y / Z travels are 800, 600 and 500 mm. The machine is equipped with a Sinumerik 840D numerical control with a LAN cable to an external computer. In addition, the lathe is equipped with, among others: Chip conveyor, Hydraulic clamping, Magazine for 87 tools, Turning finder and Control cabinet air conditioning. The spindle rotates at a maximum speed of 15,000 rpm. Spindle hours approx. 4500 h. The total weight of the milling center is approx. 7 tons. Technical data of the Hermle C 800 V CNC milling center - Travel X / Y / Z axis: 800/600/500 mm - rapid traverse: 35 m/min - maximum spindle speed: 15.000 rpm oil mist extraction - spindle power: 19 kW - operating voltage: 400V; 3PH; 50Hz - control voltage: 220V AC; 24V DC - machine dimensions (L x W x H): 2,3 x 3 x 2,65 m - Total weight: 7000 kg Equipment of the Hermle C800V CNC milling center - CNC control: Sinumerik 840D - Tool magazine capacity: 87 pieces Itedpfx Aheiva Dko Uor - Lamp sockets: SK40 - cooling pump through the tool: 40 bar - control cabinet air conditioner - rotating viewfinder - chip conveyor Separately additionally available with to see on the photos! tool presetter Various SK40 holders Touch probe Heidenhain TS32 Neuwetig

Condition: excellent (used), Year of construction: 1998, operating hours: 148,086 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, rotational speed (max.): 12,000 rpm, overall weight: 6,500 kg, coolant supply: 20 bar, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain TNC 430 (handles modern trochoidal paths without issues) Year of manufacture: 1998 Basic dimensions (L/W/H): 2.5 x 2.1 x 2.7 m X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Highlights: Tool measurement / workpiece probe / LED machine lighting / HSK63 / V2A stainless steel interior cladding / ICS (internal coolant supply) / chip conveyor / external air with cold air nozzle via M-function / status LED signal lamp Itodjxz A Nnjpfx Ah Usr Spindle Data Spindle mount: HSK A 63 (12,000 rpm) Tool magazine: 30 positions Feeds and Speeds Feed rate range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control on-time: 154,435 h Machine on-time: 148,086 h Program runtime: 49,428 h Spindle hours: 46,014 h Drive hours: 77,927 h 5-axis postprocessor for Fusion 360 included Inspection and demonstration by appointment. Price is net, plus VAT.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, The machine is in good technical condition and can be tested by prior arrangement. The current condition corresponds to its age, and we currently have no issues with the machine. On 16.03.2022, the tool magazine door was replaced. On 28.08.2023, the SIMODRIVE 611/18A servo converter was replaced. SK 40. Spindle hours: 18,396, machine hours: 56,040. Number of axes: 3. Machine video available upon request. Heidenhain 530. Itodpfx Asxyip Ssh Ujr

Year of construction: 2002, condition: like new (used), machine/vehicle number: 16.34.02, 6 Die 6 Blow Header MULTIPRESS MP610LS Maximum Cutoff diam. (500/Nmm2): 12 mm Max. Cutoff length : 105 mm Iodpfx Ash Tkraoh Uetr Max. KO length (die side): 80 mm Max. PKO length: 23 mm Max. Speed: 180 ppm

Condition: good (used), Year of construction: 2000, FOR SALE 3RD Hermle C 600 U Machining Centre 5 AXIS YEAR 2000 Numerical Control (CNC): Typically equipped with a Heidenhain TNC 430 system, which was the standard for 5-axis machines at the time, or in some cases the newer Heidenhain iTNC 530 system. Axis Configuration: 5 simultaneous axes (if the option was selected), with an integrated tilting rotary table. Machining Travels (X/Y/Z): X: 600 mm Y: 450 mm Z: 450 mm Spindle Speed: Commonly fitted with a 15,000 rpm or 16,000 rpm spindle for high-speed machining (HSC). Spindle Taper: SK 40 or HSK 63. Tool Capacity: 30-position automatic tool changer. Weight: Approx. 6,500 kg, indicating its robust and stable construction. BT MACHINES BUYING AND SELLING Iedpfx Ahex E Ryfe Uetr ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, Machine parameters: Travels in X, Y, Z axes: 650X450X450 mm Itjdpfx Ahsxyipfj Ujr Description: The machine is in good technical condition; test runs are possible by prior arrangement. HSK 63. Heidenhain 426/430. - The current condition corresponds to the machine's age, and there are currently no issues. X-axis ball screw was replaced on 5.1.2022. Hydraulics were overhauled on 25.4.2024. - Spindle hours: 41,273, machine hours: 89,892 - Number of axes: 5. Video of the machine available on request.

Condition: ready for operation (used), Year of construction: 2018, Max. clamping diameter: 20mm, max. workpiece length: 205mm (GB type), 45mm (NGB type), sub-spindle diameter: 20mm, sub-spindle bore: 21mm, max. sub-spindle speed: 9000/min, main spindle motor power: 2.2kW (continuous)/3.7kW (10min / 25% DC), sub-spindle motor power: 0.55kW (continuous)/1.1kW (15min / 40% DC), driven tool capacity: max. 6000/min, tool motor power: 1kW (continuous)/1.2kW (5min / 30% DC), control: Fanuc 0i-TD, connected load: 3.74kVA, noise level: 74dB(A), length: 2070mm, width: 1177mm, height: 1760mm, weight: 1700kg. With bar feeder for bars max. 3200mm and automatic bar loading magazine for bar diameter: 2-20mm. An on-site inspection is possible. Ijdpfxew U T Trj Ah Ustr

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, for sale PREMIER Hermle C 600 U machining centre manufactured in 2001 5-AXIS Year of manufacture: 2001 Numerical Control (CNC): Typically equipped with a Heidenhain TNC 430 system, which was a benchmark for 5-axis machines at the time, or sometimes with the latest Heidenhain iTNC 530 system. Axis configuration: 5 simultaneous axes (if option selected), with integrated tilt rotary table. Itsdpfxjxzz Szj Ah Uer Travel distances (X/Y/Z): X: 600 mm Y: 450 mm Z: 450 mm Spindle speed: Often configured with a 15,000 or 16,000 rpm spindle for high-speed machining (HSC). Spindle taper: SK 40 or HSK 63. Tool capacity: Automatic 30-position tool changer. Weight: Approximately 6,500 kg, indicative of its massive and stable construction. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS