Hexagon Global S 05.07.05

Hexagon Global S 05.07.05

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: GLAA000683IA, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, Shop-Floor package The Shop-Floor capability package ensures reliable results even in the challenging conditions of shop-floor environments. Advanced multi-sensor structural thermal compensation enables GLOBAL S to compensate for fluctuating temperatures (15-30 °C range) while covers and bellows provides a higher level of protection from dust and dirt. The package includes a selection of options ideal for shop-floor dimensional inspection workflows. The kit includes: • Advanced multi-sensor structural thermal compensation • Machine accuracy specifications in the Shop-Floor Temperature range 15-30 °C • Machine improved accuracy specifications in the Extended Temperature range 16-26 °C • Bellows and cover for the X axis and Y axis (left side). Accuracy: MPE (E0,MPE/ E150,MPE) = 1.5 + L/333 μm MPE (THP)/ MPE (τ)= 2.9/45 μm/seconds Measuring range: X = 500 mm; Y = 700 mm; Z = 500 mm; High speed: Max 3D speed: 500 mm/s Max 3D acceleration: 1700 mm/s2 DC241 Controller NJB Jog-Box PROBING CONFIGURATION HH-A-T2.5° Automatic Probe Head The HH-A-T2.5 is a ram mounted probe head that is capable of indexing in 2.5° increments and can achieve 12,240 unique positions. The head features a number of new innovations including an embedded controller and capacitive crash protection. Technical Specifications: • Indexable axis A (Roll): +105°, 2.5° index • Indexable axis B (Pitch): +180°, 2.5° index • Rotation Speed: 90° in 2.5 sec. Knedpszuk Acjfx Afwea • Max applied torque: 1.4 Nm • Probe Mounting: TKJ Kinematic Joint • Max. Extension bar: 450 mm HP-S-X1S Scanning Probe The HP-S-X1 supports all the standard probing modes like: Single Point Probing, Self-Centering as well as Continuous High Speed Scanning for fast and accurate form and profile measurements. The HP-S-X1S kit includes: HP-S-X1S scanning probe, Styli stet and the AC/DC probe interface. HP-S-X1S Technical Characteristics • Probe Type: Analogue • Probe Dimension: Ø 30 mm x 109 mm • Styli Length Range: vertical: 20 - 115 mm; horizontal: up to 20 mm • Max. Styli Weight: 20 g (incl. styli clamping) • Styli holder Weight: 7 g or 8 g • Stylus Joint: M3 thread • Over Travel Range: ± 2 mm in all axes Ceramic Calibration Sphere: Ø 25 mm TOOL CHANGER HR-X1 Automatic Styli Changer Rack – HR-X-400 The HR-X1S / H styli changer is available from min. 3 ports to max. 9 ports. It allows a fast styli changes, in automatic mode, during the measuring cycle Standard version supplied with 3 ports - HP-X1-P-SF. Styli holder HP-S-X1S-1 (2 pieces) Styli holder HP-S-X1S-2 (1 piece) PC DELL 3630 Workstation Desk Extension PC-DMIS CAD++ EATON 9SX 2000 UPS

Condition: good (used), Year of construction: 2011, functionality: fully functional, Discover the used 5-axis machining center DECKEL MAHO DMU 60 eVo, manufactured in 2011. This machine is equipped with a Siemens control system and, thanks to features such as internal cooling, a measuring probe, and laser measuring, offers the highest precision for complex manufacturing tasks. A very well-maintained and immediately ready-for-use machining center for demanding users. Technical data of the Deckel Maho DMU 60 eVo: Travel in X-axis (mm) 650 Travel in Y-axis (mm) 500 Travel in Z-axis (mm) 500 Travel in B-axis -5/+110 C-axis nx360 Number of axes 5 Spindle speed (rpm) 14000 Spindle power (kW) 18.9 Tool interface SK40 Weight (kg) 10000 Machine hours (h) 15995 Year of manufacture 2011 Control system Siemens 840D SL Control type CNC Total power requirement (kW) 50 kVA Weight (kg) 10000 kg Location Baden-Württemberg Delivery September 2026 Equipment and accessories: -Internal cooling -Chip conveyor Knsdpfx Aszq Eghofwea -Laser measuring -Measuring probe -3D-quickSET for checking and correcting the 4- and 5-axis kinematics -Band filter -Used tool holders -Coolant gun

Condition: as good as new (ex-display), Year of construction: 2022, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, UK Delivery Only Global S Green 07.07.05 Shop Floor - additional bellows on the X & axis Knjdpfx Aezimrvefwoa HH-AS8-T5 Automatic Indexing Probe Head (5° increments) HP-THDe High Definition Touch Trigger Probe Year of Manufacture: 2022 ISO 10360-2:2009: MPE(E0/E150)1) [18-22°C] 1.5+ L/333 MPE(E0/E150)1) [15-30°C] 1.5+ L/263

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 15 h, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 130 kW (176.75 HP), fork length: 1,200 mm, empty load weight: 21,810 kg, total length: 7,820 mm, drive type: Diesel, construction width: 2,490 mm, Rotating telehandler Load center: 600 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: 445 65 R22.5 Front tire condition: 80 - 100% Kodpfxoxya H Us Afwjna Rear tire type: Pneumatic Rear tire size: 445 65 R22.5 Rear tire condition: 80 - 100% Third control valve, heating, full cabin, air conditioning, Remote control, work platform pre-installation, free return flow

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Ksdpfx Ajt Hw S Iefwjna Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Condition: good (used), Year of construction: 1993, ELB surface grinding machine Year: 1993 Magnetic table size: 1500x550 mm With automatic downfeed With wheel dresser Kodpfx Aoygtiwefwena Paper band type coolant tank Lots of grinding wheels

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Kedjwm Rm Iepfx Afwsna Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 Knedowh Sigjpfx Afwja C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION Kodpfx Ajncfd Rjfwjna System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - Glass standard 25mm - Ring gauge 20mm Computers and software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm - Solara.MP12 - QA STAT 12 - O-QIS 12 Delivery, commissioning and other services on request If desired, the measuring device can be converted from OptiCheck3D V 5.0

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW Kedeyackdspfx Afwjna max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)