Double blow header

HILGELAND CH0K

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Djdpswuurwefx Aa Nocd Exact scope of delivery according to photo documentation

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. Dsdpfjxcgy Hox Aa Nocd The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm Dcodpfxsu Szucs Aa Ned (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: excellent (used), Year of construction: 2008, Spinner TS66L-SMC CNC Lathe with Sub-Spindle Year of manufacture: 2008 Control: FANUC 18i-TB Turning diameter: 400 mm Turning length: 640 mm Bar capacity: 66 mm Swing diameter: 685 mm Travel (X-axis): 240 mm Travel (Z-axis): 640 mm Main spindle speed: 4,000 rpm Sub-spindle speed: 5,000 rpm Main spindle bore: 73 mm Sub-spindle bore: 43 mm C-axis: 0.001° Turret: 12 positions, all driven Tool holder: VDI 30 Driven tools: 9 kW Driven tool speed: 4,000 rpm Feed rate, stepless: 500 mm/min Djdpfxexptz Ro Aa Necd Rapid traverse X-axis: 18 m/min Rapid traverse Z-axis: 24 m/min Spindle motor power: 19 / 14 kW Machine weight: approx. 5.7 t Space requirements: approx. 2.35 x 1.65 x 1.85 m

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 430 mm, spindle bore: 80 mm, turning length: 1,500 mm, turning diameter: 430 mm, quill stroke: 150 mm, quill diameter: 70 mm, spindle speed (min.): 3,000 rpm, bed width: 350 mm, total length: 1,900 mm, total width: 1,500 mm, total height: 1,600 mm, spindle motor power: 11 W, overall weight: 3,500 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, three-jaw chuck diameter: 250 mm, Equipment: rotational speed infinitely variable, The Seiger SLZ 420K is a conventional lathe known for its robust cast-iron bed, precise slideways, and digital support features. It is well-suited for single-part production, repairs. Dimensions and capacities • Swing over bed: 430 mm • Swing over cross slide: 220 mm • Center distance: 1,500 • Bed width: 350 mm Spindle and drive • Spindle bore diameter: 80 mm • Spindle head: DIN 55027, Size 6 • Spindle diameter in front bearing: 110 mm • Main drive: 11 kW • Speed range: 1–3,000 rpm Tailstock • Quill diameter: 70 mm • Quill stroke: 150 mm • Morse taper: MK 5 Control and features • Display: Heidenhain Positip 8016 digital display • Linear scale: Heidenhain linear scales on the X- and Z-axes • Feed rates: V-constant and controllable feed rates via a potentiometer • Rapid traverse: Functionality in both the X- and Z-axes • Handwheels: Mechanical handwheels for manual operation • Bed: High-quality, torsion-resistant cast-iron bed with hardened and precision-ground slideways The Heidenhain Positip 8016 is a digital measuring instrument with a touchscreen, suitable for manually operated milling, drilling, and turning machines. The display offers various functions to increase productivity and accuracy. Key features • Touchscreen operation: The device is equipped with a robust 12.1-inch color TFT touchscreen, which can also be operated while wearing gloves. • Multiple axes: The system can control up to six axes, four of which are standard linear, angular, or coupled axes, and two are optional. • Extensive functions: The Positip 8016 includes features such as drilling patterns, tool radius compensation, a cutting data calculator, and the ability to save positions. • Distance-to-zero function: This function helps you move quickly and accurately to the next position by working towards a zero value. • Programmable: Recurring machining steps can be saved as a program, which speeds up the production of small batches. Dsdpfx Aexr U E Asa Njcd • Interface: The display features interfaces such as Ethernet and USB for importing and exporting data. • Robust design: The device is specially designed for use in workshop environments and has a sturdy aluminum housing with passive cooling.

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device Dcedpfovwgpbex Aa Nsd - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm Dcsdjlkgvbspfx Aa Nsd travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 Dcodeht Hg Depfx Aa Ned NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Dodpfxovyyyxo Aa Necd Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Year of construction: 2018, condition: ready for operation (used), A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible. Dcsdjwtg H Repfx Aa Nod