Vice Machine vice

Hilma Römheld SM 125

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm Rsdpfjwzx Nmox Abdjp z-travel: 520 mm table surface area: D 700 x 500 mm turning speeds: 42.000 1/min tool taper: HSK E50 control: HEIDENHAIN iTNC 530 tool change unit: 60 pos. rapid traverse: 50 m/min table load capacity - central/maximum: 350 kg total power requirement: 50 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, el. handwheel, laser, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, oilmist suction, spindle chiller, no internal coolant supply, approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in total machine in good condition (test report available) *

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Rsdpfx Abjw A I Uuodep Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 44 h, load capacity: 4,500 kg, lifting height: 17,000 mm, fuel type: diesel, mast type: telescopic, power: 85 kW (115.57 HP), empty load weight: 13,040 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 20 Condition: New machine Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% Redpow Eqc Hjfx Abdep 3rd valve, 4th valve, heating, full cab, CE certificate, Telescopic handler model ICARUS 45.17 GD engine 2PL1107 ----- 1 ICARUS 45.17 DYNAMIC ST.V IT 1 ST ICARUS 45.17 DYNAMIC - GD TÜV/DEKRA approval 20 KM/H (only for Germany) - Automatic 45% locking differential on the second axle Hydraulic single-lever control unit with proportional and simultaneous control (flow-sharing). Open center system Wheel set#400/70-24#Power CL Michelin with mudguards Fixed Dieci equipment carrier plate Boom swing damping (Not compatible with basket pre-equipment) Standard heating Air suspension seat Indicator light correct steering Set car radio preparation Cab comfort kit (sunshade ,rear storage net, dual USB port) Standard rear view mirror right and left FNR lever under the steering wheel - Rear view camera, integrated in the machine's display. LED headlights on boom head Two rear swivel LED work lights on cab LED work lights (1 on the right side, 1 on the left side, 1 at the rear) Road headlights (front) with LED daytime running lights. Rear-view mirror 7-pin trailer socket. Pair of floating forks 120 x 50 mm, L = 1200. 5.0 t load capacity

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Rjdpjx E Eamofx Abdop Number of axis 5 Movement Y-Axis Movement 230 mm A-Axis Movement 1550 mm Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,170 mm, travel distance Z-axis: 700 mm, table width: 850 mm, table length: 1,000 mm, rotational speed (max.): 24,000 rpm, 1. MAIN MACHINE DATA Control: HEIDENHAIN iTNC 530 Number of Axes: 5-axis Travels: X-axis: 1,350 mm | Y-axis: 1,170 mm | Z-axis: 700 mm Spindle: Manufacturer: STEP-TEC (motor spindle) Max. speed: 24,000 rpm Tool holder: HSK63 Table & Pallet System: CNC rotary table with swiveling spindle 3-position pallet changer (APC) Pallet size: 1,000 x 850 mm 2. TOOL MANAGEMENT & AUTOMATION Tool magazine: 238-position high-capacity magazine Magazine design: 5-level rack system Cooling system: BMF belt filter system with ICS (internal coolant supply) Workpiece measurement: probe from RENISHAW Enclosure: full guard cabin 3. TOOL AND ACCESSORY PACKAGE (Included) Storage systems: 1x tool cabinet (4 drawers, 1 door) 2x table trolleys 1x telescopic drawer cabinet (11 drawers) Redpfx Ajycr Uwsbdep Clamping devices & fixtures: FCS Breil zero-point clamping system 3x grid plates (grid spacing: 25 mm)

Condition: used, Universal Machining Center Machine type: DMG HSC 75 linear Control unit: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Operating hours: 63,133 h Spindle hours: 28,596 h TECHNICAL DATA: Traverse paths: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rodpfxexyx Drs Abdep Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm Rodpeu S Izcsfx Abdjp compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Condition: excellent (used), Year of construction: 2018, overall weight: 272 kg, load capacity: 20 kg, arm reach: 1,650 mm, Our industrial robots are thoroughly inspected and tested before delivery and are ready for immediate use. Rjdpfxswlzzme Abdjp Robot comes complete with: - Control cabinet - Teach panel - Connection cable

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, Rsdpfx Abjw Npz Iedjp 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Year of construction: 1983, condition: used, machine/vehicle number: 535350, Lg-Nr. 05466, - Compressive force 100 t - Throat 320 mm - Width in the column below the guide 400 mm - table size approx. 850 x 610 mm - drop-through hole in the table 335 / 300 mm - thickness of the table clamping plate 90 mm - overall installation height approx. 300 mm - surface of the chair 600 x 335 mm - height adjustment of the chair 80 mm - stroke adjustment 10 - 130 mm - ejector stroke in the chair 32 mm - Stroke rate continuous operation approx. 56 /min - Drive 380 V / 11 kW - space requirement approx. W 1900 x H 2800 x D 2200 mm - weight approx. 9000 kg - with : - UVV press safety control unit PREVENTA - Hydr. + pneumatically operated clutch Redpfo E A Tmex Abdjp - LUTEX additional brake system - central lubrication