Malt milling plant

Künzel

Year of construction: 2021, condition: ready for operation (used), A silo system consisting of 3 storage silos, 1 weighing silo and conveying units is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, storage silo volume: 32.6m³, weighing silo volume: 13.8m³. Storage silo capacity at 0.2t/m³: 6500kg, weighing silo capacity at 0.2t/m³: 2800kg. Storage silo dimensions X/Y/Z: 4200mm/4200mm/4200mm, weighing silo dimensions X/Y/Z: 3000mm/3000mm/3400mm, control: Siemens S7. Including steel frames, gate valves, full and demand indicators, filter bags, filling line, conveying and dosing system, rotary valves and gate valves. Documentation available. On-site inspection is possible. Nsdpfx Abev Ip Stevskw

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 Nkedpon D Hm Sjfx Abvjw L: 4.000 mm, W: 2.700 mm, H: 2.800 mm

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Nkodpfx Abex Srphsvsw

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg Nedsftm Hrepfx Abvskw HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Nkjdpfx Abjl Hx Adsvjw

Condition: used, Unused methane fed 1025 kW Caterpillar 3516 STD generator set made in 1993 with only 12 hours of use in factory tests. Rated 1025kW, 1281 kVA, 1500 RPM, 50 Hz. Nksdpjyhc Rmjfx Abvjw

Condition: good (used), Year of construction: 1988, operating hours: 9,999 h, functionality: unexamined, overall weight: 3,500 kg, fuel type: diesel, color: blue, output voltage: 400 V, output frequency: 50 Hz, nominal power: 360 kW (489.46 HP), nominal power (apparent): 450 kVA, total length: 3,200 mm, total width: 1,340 mm, total height: 1,800 mm, rotational speed (max.): 1,500 rpm, type of cooling: water, Brand: Mercedes Benz - Stamford Model: 450 kVA diesel generator Year of manufacture: 1988 Serial number: On request Operating hours (read): Unknown Capacity (kVA): 450 Capacity (kW): 360 Engine brand: Mercedes Benz Engine model: OM444A Fuel: Diesel Alternator brand: Stamford Alternator model: HC534C Voltage: 220 - 380 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 684 Dimensions LxWxH (mm): 3200 x 1340 x 1800 Weight (kg) approx.: 3500 Units in stock: 1 Manufactured in: Germany Comments: Really good visual condition, operating hours unknown, twin turbo. Njdsydk Dgspfx Abvekw

Condition: good (used), A-100730-Horizontaltank 16m3 Horizontal tanks 16.000 L, Stainless Steel AISI 316, Nkedpfxoiiyufj Abvow Dimension: Ø 2530 mm X H 2900 m L 3800 mm Manhole at front Only 2 pieces identical to offer

Year of construction: 2008, condition: excellent (used), Plate heat exchanger APV H17 7.41 4.8nm2 800kw Nkodpewx Hz Ssfx Abvow APV H17 MGJ plate heat exchanger /ct2227/ Manufacturer: APV Type: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer surface: 4.08nm3 Nominal power: 800kw Width: 340mm Height: 1050mm Connection height: 137mm Depth: 60cm Pipe connection DN50,EN 1092 Capacity: Primary: 7.41Liter Secondary: 6.86 Max pressure: 10bar Test pressure 15.53 bar Max temperature: 110 °C Stainless steel pipe connections.

Year of construction: 1991, condition: used, Glass bottle filler and capper for filling beer as well as CO2-containing and non-CO2-containing soft drinks and capping with crown caps. Capacity: approx. 14 000 bph. Fomat parts for Euro, NRW, Longneck and Vichy bottles. Additional title: 42 filling points Capacity: 14000 bottles/h Number of filling valves: 42 Voltage: 220/380 V Formats: Euro, NRW, Longneck und Vichy type bottles with crown caps Running direction: left -> right Nkodpfx Asvcqi Njbvow Operation / Control: Siemens S5