Screw compressor

KAESER CSD102

Condition: excellent (used), Year of construction: 2005, operating hours: 46,952 h, functionality: fully functional, Kaeser CSD102TSFC screw compressor. 55 kW with 8.5 bar and 9.90 m3/min. Pjdpfx Adewiwv Ujisgw Integrated dryer. Frequency-controlled. Built in 2005 with approximately 46,900 hours.

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) Podpfx Adet Hdh Njiogw With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Year of construction: 2002, condition: ready for operation (used), Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible. Pgjdpfx Adexph Nvjisw

Condition: excellent (used), Year of construction: 2001, KAESER CSD102 screw compressor machine after service Technical data: capacity: 10.10 m3/min (10100L/min); engine power: 55 KW; pressure: 8 bar Pgedjwb Daqepfx Adijw year; 2001 mileage; 14207h net price 21500 PLN gross price 26445 PLN The compressor is fully functional, we provide service.

Condition: good (used), different twin press drinker, a good condition, immediately available Pgedpfx Adoi Arz Esijw If you are interested, we will be glad to inform you about other machines in our house. You are welcome to visit the machine in our house by appointment.

Condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,212h. Pgodpfel Eyq Rox Adiow

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, cutting width (max.): 920 mm, overall weight: 2,000 kg, Polar 92X Year 2004 Pedpfx Adow I Nu Sjiogw Program Large side tables Spare knife Photocells

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Podpfx Adswypp Ioiogw Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: good (used), Year of construction: 2004, functionality: fully functional, STEINEMANN LAMINATING MACHINE • TYPE : LOTUS 72 SF • SIZE : 72 x 102 cm • YEAR : 2004 DETAILS: Speed 10-80 m/min. Minimum Sheet Size: 22 x 30 cm Maximum Sheet Size: 72 x 102 cm Sheet Production: >10.000/h Sheet Weight SF: 100-600 g/m2 Adhevise Application SF: 1.5 – 4.0 g/m2 Working Width 72 cm Film Thickness 10-50 µM Film Roll Diameter 350 mm Pgodpfxjvm Aipo Adiow Energy Consumption 24/66 kW It is Very Good Condition Available Immediately.

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Serial number 1941 Year of manufacture: 2010 Nominal output: approx. 30 kW Maximum operating pressure: 8 bar Engine speed: 2,945 1/min Pgjdjt Iwyujpfx Adisw Condition: used (see pictures and type plate)