HDC 3000 Universal Machine Tool

KEPPLER HDC 3000, 5-achsig

Condition: used, Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel/Capacity: Longitudinal (X): mm 3,000 Transverse (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/Clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on table surface: pcs. 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Maximum transport load: kg 11,000 Paint: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Lasdpfjygipaox Amnoa Maximum drive power, from 198 rpm: kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Maximum torque: Nm 935 Speed control: 3-stage (oil-cooled) with automatic changeover Feed rates: X, Y and Z axes mm/min: 2 – 15,000 Maximum rapid traverse speed: X, Y and Z axes mm/min: 25,000 Maximum feed force: X, Y and Z axes: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor +1,280 mm) Height approx. (at Z = 1,500 mm): mm 3,800 Width approx. (at Y = 1,200 mm): mm 5,000 (with spacer 4,500 mm) Weight: approx. kg 20,200 Connected load: approx. KVA 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & through-spindle coolant RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced through a strict selection process and undergo thorough inspection (Deep-Dive Check). After intensive cleaning, any identified obvious defects and faults are professionally repaired by our qualified service team.

Condition: excellent (used), Year of construction: 2015, operating hours: 19,600 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhain, controller model: 530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in good condition. 5-axis simultaneous machining. Rotary table: 1700 mm. Table load capacity: 6 to 9 tons. Spindle hours: 9000 h. Lsdeytt Elopfx Amneaa

Condition: excellent (used), Year of construction: 2016, operating hours: 8,737 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Matec 30HV 3000x800x800 mm NC swing head +/- 105° swiveling Heidenhain TNC640 Handwheel Motor spindle 15,000 rpm / 30 kW / 198 Nm Tool holder HSK 63A 48 tool pockets ICS (internal coolant supply) 40 bar Belt filter system 450 liters Air through spindle Oil mist extraction (left and right) Partition wall for pendulum operation Side loading door Prepared for additional NC axis Ledpjyaa Sfjfx Amnjaa 3D triggering probe Renishaw RMP60 Tool breakage control (laser) Clamping hydraulics 100 bar / 10 l/min 2 x clamping circuits, clamping, releasing, manual and via M-function Robot interface The machine has very low operating hours and has always been perfectly maintained. The complete (maintenance) history is known to us. Tools and vices can be taken over if required.

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 - 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accessories Guarding with 2 slidings doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features Laodpfx Asyf Rrtjmnoa

Condition: used, Year of construction: 2008, operating hours: 16,772 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Automatico 2,5ºx2,5º, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table load: 10,000 kg, table length: 4,200 mm, total height: 4,000 mm, total width: 3,500 mm, total length: 10,000 mm, overall weight: 21,900 kg, Milling machine LAGUN GBM42 Laedpsyiu Rnjfx Amnea

Condition: used, SLM Solutions Type: SLM 500 Build space (L x W x H): 500 x 280 x 365 mm (minus substrate plate height) 3D optics configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm, Min. structure size 150 µm Focus diameter 80 µm - 115 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 16 l/min (argon) Average protective gas consumption in the flooding process: 250 l/min (argon) Powder supply with 90 kg Electrical connection / power consumption: 400 volts 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Was operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Lsdpev Iff Nsfx Amnoaa Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 500 mm, spindle bore: 75 mm, turning length: 1,000 mm, turning diameter: 500 mm, Equipment: rotational speed infinitely variable, Dormac CY-K500T Teachin lathe Turning diameter above bed: 500 mm Passage: 75 mm Turning length: 1000 mm Transport dimensions (LxWxH): 300x180x210 cm Weight: 2800 kg Steering: Fagor Year of construction: 2009 Options: Including tools and documentation Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Dormac CY-K500T Teachin lathe Turning diameter above bed: 500 mm Tube diameter: 75 mm Turning length: 1000 mm Transport dimensions (LxWxH): 300x180x210 cm Weight: 2800 kg Control: Fagor Year of manufacturing: 2009 Options: Includes tools and documentation Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Dormac CY-K500T Teachin Drehmaschine Drehdurchmesser over the bed: 500 mm Basket door diameter: 75 mm Drehlänge: 1000 mm Transport abmessungen (LxWxH) 300x180x210 cm Weight: 2800 kg Steuertyp: Fagor Construction year: 2009 Optionen: Enthält Tools und Dokumentation Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Lasdporfxihjfx Amnoa Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, machine/vehicle number: 1159, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,700 mm, number of slots in tool magazine: 40, swivel angle A-axis (min.): -105 °, swivel angle A-axis (max.): 105 °, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Placing a bid is binding and obligates the buyer to collect the machine within the specified period: July 28, 2025, to July 31, 2025. Machine includes approx. 90 tool holders TECHNICAL DETAILS Travel Range X-axis: 4,000 mm Travel Range Y-axis: 1,200 mm Z-axis Travel (horizontal): 1,700 mm Z-axis Travel (vertical): 1,690 mm Rapid traverse: 30 m/min Swivel Head and Axis System Swivel Head: Two-axis universal swivel head, continuously adjustable in both axes simultaneously Clamping: Axes can be hydraulically clamped via M-function A-Axis Working Range: ±180° Torque without clamping: max. 1,750 Nm Torque with clamping: max. 2,500 Nm Direct measuring system: ±3″ B-Axis Working Range: ±180° Torque without clamping: max. 4,200 Nm Torque with clamping: max. 12,000 Nm Direct measuring system: ±5″ Spindle Speed range: 20 – 8,000 rpm Power at 40/100% duty cycle: 33/24 kW Torque at 40/100% duty cycle: 382/278 Nm Tool Magazine Number of tool stations: 40 Tool holders included: approx. 50 HSK 100 + 40 HSK 100 in magazine Max. tool weight: 20 kg Tool length: 460 mm Max. tool diameter with adjacent positions occupied: 125 mm Max. tool diameter without adjacent positions: 200 mm Tool change time: approx. 8.5 s Chip-to-chip time: approx. 9.5 s CNC Control Control: Siemens SINUMERIK 840 D-POWERLINE Rotary Table Type: NC rotary table with direct drive Faceplate diameter: 1,900 mm Max. load capacity horizontal (turning/milling): 5,000 kg Circular run-out accuracy: 0.02 mm Flatness accuracy: 0.015 mm over 1,000 mm Rated speed: 180 rpm at 100% duty cycle Total clamping surface: approx. 4,300 × 1,200 mm (excluding full diameter of NC rotary table) T-slots: 11 × 18H7 MACHINE DETAILS Installation dimensions: 8000 x 6000 x 5000 mm Weight: 45 t Transport width: approx. 3,450 mm Transport length: approx. 6,900 mm Loading height: approx. 4,015 mm Ljdpfxowu E Eze Amnoaa EQUIPMENT - Two-axis universal swivel head with stepless adjustment - Direct measuring systems in A/B-axis - NC rotary table with direct drive - Siemens SINUMERIK 840 D-POWERLINE CNC control - 40-station tool magazine - Approx. 90 HSK 100 tool holders - Complete documentation The machine can be transported on trucks up to 3,000 mm wide.