CNC Machining Centre KERN Micro

KERN Micro

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 Gedpfx Aaeyalpconokd • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document Gkodor A Hcbspfx Aanjd

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 Gsdpfx Ajxcwdvoanekd The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. All tools and accessories are included. Inspection possible by appointment.

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 1,600 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 90 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 530, workpiece weight (max.): 3,000 kg, total height: 3,600 mm, total length: 8,017 mm, total width: 4,905 mm, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, rotational speed (max.): 10 rpm, overall weight: 35,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 28 W, spindle nose: HSK63A, number of slots in tool magazine: 60, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, Equipped with: Gkedpfxszgbdze Aansd - 5 axes - Automatic pallet changer system - High-pressure coolant system running through the spindle with paper filter and 1000-liter tank - Automatic tool presetting system by BLUM - CE marking

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Godpfxjuz If Ne Aanskd Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Year of construction: 2011, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 19,000 h, spindle nose: HSK 63, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, The machine will be available starting October 2026! Godpfx Aozx Ur Neanjkd

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Gsdpfx Aezb U Epjanokd Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Technical details are shown on picture. Godpfx Aasyyniaonjkd

Year of construction: 1999, condition: excellent (used), 600 KG 10 BAR Godpsxy Ikbjfx Aanekd

Condition: used, Year of construction: 1998, grinding length 2000 mm grinding width 600 mm total power requirement 17 kW Gkodjv S Ip Eopfx Aaned weight of the machine ca. 10 t