PET filling line for nonreturnable bottles

KHS

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C Psdpfx Ajz Hckmoazjrb - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: good (used), Year of construction: 2000, Connection value: 430kW Dimension: Total length: 10750mm Width: 3400mm Height: 3900mm Pedpfoip T T Hsx Aazerb

Condition: used, Year of construction: 2006, Overview This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack CA-1 - Year of manufacture: 2006 - Machine type: carton erector with bottom gluing - Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps - Power supply: 400 V, 3 Ph, 50 Hz, 15 A - Compressed air: min. 5 bar operating pressure - Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm - Blank infeed: roller conveyor with stainless steel rollers, roller width 1,000 mm, infeed clearance 800 x 450 mm - Outfeed: roller conveyor with stainless steel rollers, roller width 300 mm, 3,050 x 650 x 880 mm Equipment - Stack preparation with automatic loading of the blank magazine - Blank magazine with lifting device, side guides and front and rear stops - Pick-up and erecting stations with vacuum suction grippers and vacuum unit - Folding, gluing, closing and pressing devices for the carton bottom - Side and height adjustment by handwheel for different carton sizes - Enclosure with windowed safety doors - Operator panel with display, keypad, start/stop, key switch and emergency stop; operator texts in French - Control cabinet and pneumatic service unit - CE marked; operating manual (Dutch) available Pjdpoz Hcivefx Aazorb Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2007, Overview KHS Innofill NRF filling and closing monoblock for still wine in glass bottles, built in 2007. A 50-valve filler is followed by two 10-head closers: a KHS natural-cork closer with vacuum device and an aluminium roll-on capper by Zalkin, so the machine closes either corks or screw caps. Output 12,000 bottles per hour. The operator panel and software were updated by KHS in 2022. Podoz Hcauopfx Aazorb Technical data - Manufacturer: KHS - Model: Innofill NRF - Year of manufacture: 2007 - Output: 12,000 bottles/h - Filler: 50 filling valves, pitch circle 1,800 mm, filling tube diameter 20 mm - Cork closer: KHS, 10 heads, pitch circle 360 mm, electrically heated cork jaws, cork sorter mounted on top - Vacuum device with vacuum pump - Screw-cap closer: Zalkin aluminium roll-on capper, 10 heads, pitch circle 360 mm, for 31.4 x 24.2 mm aluminium caps - Machine pitch 36π, running direction left to right - Conveyor: stainless steel slat chain, 85 mm wide, conveyor height 1,250 mm - Power supply: 400 V, 3/N/PE, 50 Hz, 90 A nominal current, 100 A slow fuse; control voltage 24 V DC - Enclosure type 12 - Overall dimensions approx. 5,300 x 3,600 x H 4,400 mm Scope of delivery - Filler-closer monoblock with guarding, front panels slide up - Automatic central lubrication - Two infeed hoppers for corks and caps with elevating feed, approx. 1,600 x 1,200 x 1,720 mm and 1,500 x 1,250 x 1,550 mm - Stainless steel CIP unit, approx. 3,000 x 1,300 x 1,900 mm - Stainless steel control cabinet, approx. 2,500 x 750 x 2,100 mm - Stainless steel trolley, approx. 800 x 750 x 1,650 mm - Two trolleys with change parts, colour-coded format sets - KHS documentation: operating manuals, spare parts list, 2022 operator-panel supplement Condition Used. The machine is still installed at its production site and can be inspected by appointment. Availability Immediately.

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L)Products handled: cider, sparkling water, still water, juices with CO2Filling technology: Ultra-clean, isobaric, volumetric PET fillingCurrent product: Apple juice with water and CO2Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neckControls: Siemens Simatic S7 PLC platformMain Equipment ScopeCIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/hProcess: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanksPreforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unitCaps: Cassner cap feeding with cap rinsing and sterilizationBlow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor)Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaningCoding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspectorConveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak testerLabeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glueSecondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicatorPack coding: Leisinger Jet 3 ink coderPalletizing: Krones Robopox Modulpal (2016)Advanced Automation & Control Systems Line Control & PLCSiemens Simatic S7-series PLC for coordinated line control, interlocks and diagnosticsIntegrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cyclesRecipe and parameter management supporting fast changeovers between PET formats Prsdpfjyhbmtsx Aazjb

Condition: used, Year of construction: 2007, Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals - Stainless steel skid frame with mesh safety guarding Condition Pjdsz Hb Scspfx Aazjrb Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack SP - Year of manufacture: 2006 - Machine type: pick-and-place case packer - Bottle infeed: 4 lanes, lane width 85 mm - Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles - Case clearance: 175 x 400 mm - Power supply packer: 400 V, 3 Ph, 50 Hz, 27 A - Robot controller: KUKA KR C2, 400 V, 3 Ph, 50/60 Hz, 8 A - Overall dimensions (L x W x H): 6,000 x 3,250 x 3,650 mm - Change-part trolleys: 4 units, each 2,050 x 1,300 x 2,100 mm Equipment - Base frame with lifting column, counterweight and lifting unit - Cross conveyor and shifting carriage for the gripper head - Gripper head with pneumatic bottle tulips - Centring device for the cases in the packing zone - Four-lane bottle infeed table with lane guides - Case infeed and outfeed conveyors - Enclosure with windowed doors and safety fencing - KUKA KR C2 controller cabinet and KCP teach pendant on stand - KHS control cabinet - 4 change-part trolleys with gripper heads for different bottle sizes - Operating manual (Dutch) available Pedpfxsz Hbxie Aazorb Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: ready for operation (used), The crown caps are manually fed into the dispensing chute, the machine places the crown cap onto the bottle, and presses it into place. Prsdpfx Aajfh Dlrezjb

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors Psdpfx Aozzz Ivsazjrb - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Pedsy Szbyspfx Aazerb

Year of construction: 1991, condition: ready for operation (used), The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years. Pedpfx Aek Nm Nreazorb

Condition: excellent (used), Year of construction: 2015, KHS INNOFILL DVD 40 CAN FILLING LINE Pjdpfjtraaaex Aazorb MAX SPEED: 34,000 CPH 330ML IN 24 PACK WRAPAROUND CARTON CURRENT SPEED: 24,000- 28,000 CPH IN SMALL WRAPAROUND CARTON 4/6/8/10/12 PACKS LOCATION: UK STANDARD CAN 330ML & 440ML LID 202 SLEEK CHANGEPARTS FOR FILLING BLOC AVAILABLE GPI PACKER ADDED IN 2018 ROBOPAC PACKER ADDED IN 2022 EQUIPMENT LIST: FIPAL MINIDEPAL 20 LA DEPALLETISER • TWIN LANE RINSER • KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH • FERRUM F6 6 HEAD SEAMER • CSW DEVENTER LID FEED SYSTEM • HEUFT SPECTRUM TX • EURO SISTEMI CAN DRYERS • TELEDYNE TAPTONE INSPECTION • ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER • FT SYSTEM CP600 TP TUR300 Z200 RAS001 • GPI QUICKFLEX 300 MULTI-PACKER • HITACHI INK JET PRINTER • PACKITAL LANER • COMPLETE CONVEYOR SYSTEM • FIPAL PAL 80 F PALLETISER • ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER LOCATION: UK VIEWINGS BY APPOINTMENT WELCOME. PLEASE GET IN TOUCH TO ARRANGE AN INSPECTION. INDASSOL.COM

Condition: excellent (used), 2 x KHS / GEA High Speed Keg Filling Lines Capacity: 1,000 kph Psdoxcinmjpfx Aazjrb Sizes: 15L, 20L, 30L, 50L 60L Keg Palletiser System also available. Location: Dublin Please contact Indassol for further details & pricing.

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW Pjdpstqmvzjfx Aazjrb - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new Prodpfx Ajzlqu Toazob - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.