Vise

KNUTH UBK

Condition: new, range L-W-H 1860x595x150 mm weight 125 kg 10 St. Godpfju Imlbox Abdstt Tooltrolley 158cm. 10 Drawers workbench with door and rear wall Total dimensions completely complete 186 x 59.5 x 149 cm. Dimensions of only the tool trolley including wheels and handles 186 x 56 x 94.5 cm. Dimensions of the open compartment behind the left door 40 x 52 x 54 cm. Dimensions of the right 4 top drawers 36.5 x 50 x 7 cm. Dimensions of the right 5e drawer 36.5 x 50 x 31.5 cm. Dimensions of the left upper drawer 100 x 50 x 10.5 cm. Dimensions of the left 2nd and 3rd drawer 61.5 x 50 x 7 cm. Dimensions of the left 4th and 5th la 61.5 x 50 x 15 cm. Maximum capacity of the wheels 175 Kg. Per wheel. (Total 1050 Kg.) Maximum capacity per drawer 30 Kg. Own weight Approx. 125 Kg. Packaging dimensions 167 x 66 x 106 cm.

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Patented miter system Continuously adjustable cutting speed Hydraulic feed control Gsdpfx Absh S Nxpedstt Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw drive Swivel range 30° right / 45° left Cutting range in mm: 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping: 60mm Recommended options: Micro-spray device Laser light Clamping pressure regulator Powered chip brush Manual support roller Set-up elements

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Gedpfjfgyicjx Abdjtt Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Gtjdpsfd Abaofx Abdot Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: excellent (used), Telescopic drawer cabinet with 7 drawers 2 x 75 mm high 3 x 100 mm high 1 x 160 mm high 1 x 220 mm high Width 1015 mm Gedpfx Abew Au Aljdjtt Depth 810 mm Height 1045 mm with pallet 1200 mm Weight with pallet 270 kg

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood Gtjdjuxmt Tepfx Abdet grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: excellent (used), Heating boiler Loos UT 5200Kw.incl.oil burner Gtsdpfx Abemn Hpyedet

Condition: used, Year of construction: 2008, Technical details: length: 12192 mm width: 2438 mm height: 2896 mm weight: 4580 kg Total weight: 34000 kg charge: 29420 kg Cooling Container Internal dimensions: Length 11585mm Width 2290mm Height 2545mm Gtsdpfxjt Hzhas Abdot Pallet spaces 23 *

Condition: used, Year of construction: 2018, DEMAG Overhead Crane – 16 Tons Capacity – Year 2018 Manufacturer DEMAG Cranes & Components GmbH – Germany Type Industrial motorized overhead travelling crane – single or double girder Industrial Applications Heavy-duty lifting in steel plants, fabrication workshops, boiler-making, general machining, and logistics warehouses Main Technical Specifications: - Rated capacity: 16 tons (16,000 kg) - Year of manufacture: 2018 - Manufacturer: DEMAG – global leader in industrial lifting - Motorized travel on rails - Electric wire rope hoist (DEMAG standard, high capacity) - Power supply: industrial three-phase - Control: pendant or radio remote (depending on configuration) - Condition: used – recent, robust design Gtjdpfxjxb D Nve Abdot 🧩 Machine Usage The DEMAG 16T overhead crane is engineered for heavy-duty lifting in demanding environments. Its high capacity and modern design ensure efficiency, safety, and long-term performance. ⚙️ Features / Differentiators - Medium-high capacity (16T) for heavy industrial operations - Recent build (2018) compliant with modern safety standards - Integrated DEMAG hoisting and electrical systems - Compatible with automation and remote-control options

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm Gtsdpfewywciox Abdet 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!