Transport Band / Transport Belt with SelfControl

Kolbus FS.L 683

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP Gsdpfx Aozf Nk Tjkhjkd • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, scrubber dryer, floor cleaning machine, mop machine -Handover in the current condition as inspected -Device is without battery brush and suction bar -Working width: 500 mm -Charger Gsdpfx Aksc R S E Sehokd -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D Gsdsuddgfjpfx Akhokd weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Gksdpfxexur E Sj Akhod Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: used, Heißfolienprägemaschine mit 25000kgs Druckleistung / Hot Foil Stamping machine with Pressure 25.000Kg Gjdpfx Aozh Hawskhokd Heißfolienprägemaschine / Hot Foil Stamping GEBA BAIER 49/25 Baujahr / Year 1972 - Serial-No. 72425 Druckleistung / Pressure max. 25.000Kg Prägefläche / Embossing size max. 300 x 430mm Höhenverstellung / Height adjustment ca. 190mm In einem guten Zustand / In good condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2016, operating hours: 6,500 h, functionality: fully functional, 12 Gathering Stations Müller Martini 3692 Tensioning/Handfeeding unit 3692 ASAC Automatic Caliper Control 3715 Reject Delivery Automatic Signature Recognition Cameras: ASIR 3 Gkedpfxeyufk As Akhed 12 clamps Muller Martini 1577 Pantera Touchscreen control with automatic set-up Hotmelt spine & Side gluing unit with premelter Hotmelt side glue with premelter PUR Nozzle Spine Gluing Unit Curved conveyor system 90 Muller Martini 3520 Conveyor belt Muller Martini 3520 Conveyor belt with escape gate 3520 Müller Martini Granit 3 Knife Trimmer 3676 Müller Martini UNO Stacker 1534

Condition: like new (used), Multi-stage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Product No.: A45937986 Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg Gjdofz D Dnopfx Akhskd

Condition: used, Year of construction: 2002, turning diameter 300 mm turning length . mm control Mazatrol 640 T x-travel 190 mm y-travel 1000 mm z-travel 575 mm turning speeds 4000 U/min feed 30 m/min number of tools 12 bar loader nein Gkedpfozdu Stsx Akhsd total power requirement 18,5 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 5600x2100x2200 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), approx. 120 pieces = 480 running meters of safety conductor rails Number of conductors / number of poles: 5 Gjdpfod Hurbsx Akhekd in standard lengths of: 4 m Busbar cross section: 10 mm² for mains voltage up to: 500 V Load capacity at 100% ED: 60 A Weight per meter: 2.1 kg

Condition: good (used), functionality: fully functional, Various Erowa tool holders / tool holders are for sale. All holders are functional and tested by us. Can be purchased individually or as a package 1: ER-020571 2: ER-016841 3: ER-016841 4: ER-016841 5: ER-016841 6: ER-016841 7: ER-016917 Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Gedpfx Aetwz N Tekhekd PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Dndpw7 For further information or contact options, please visit our website