Form carrier, tool carrier, closing unit

KraussMaffei

Condition: ready for operation (used), Year of construction: 1997, operating hours: 111,569 h, clamping force: 10,000 kN, This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details. • Injection unit • Screw speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection measurement stroke: 200 mm • Metering stroke: approx. 465 mm • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Closing pressure drop: approx. 4–6 bar/min Lodpfxsywlvre Abvjhd • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Cylinder heater power examples: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. −1 K to +2 K • Condition / maintenance relevant data • Machine alignment tolerance:

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Lodpjxk U Aljfx Abvshd Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: used, Year of construction: 2004, operating hours: 76,000 h, total height: 2,480 mm, total width: 2,330 mm, total length: 9,830 mm, screw diameter: 70 mm, clamping force: 4,200 kN, displacement volume: 1,047 cm³, 2. Unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³Distance between injection unit 1 and 2: 300 mm (piggy / Multinject) clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar equipment included screen text german core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts Lhodeyv E Ewepfx Abvod mould heating 16x Injection moulding machine for two components measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG

Condition: ready for operation (used), Year of construction: 2005, operating hours: 59,000 h, clamping force: 4,200 kN, screw diameter: 60 mm, displacement volume: 769 cm³, injection pressure: 2,200 bar, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Clamping force: 4200 kN Ledpjyv E Dasfx Abvjhd Tie bar spacing (H x V): 800 x 800 mm Platen size (H x V): 1270 x 1200 mm Min. installation height: 580 mm Max. platen distance: 1300 mm Opening stroke: 720 mm Screw diameter: 60 mm Shot volume: 769 ccm Injection pressure: 2200 bar Equipment Display language: German Hydraulic core pull 4x Machine without handling Machine without material hopper Levelling elements Mould heating 12x Machine dimensions (LxWxH): 6.83m x 2.33m x 2.48m Total weight: 23090 kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 158 h, arm reach: 1,300 mm, Hello, Ledpfxsp E T N Ae Abvshd we are selling a demonstration robot UR10e, was used for a concept study but was discarded.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, clamping force: 2500 kN Ledsyv Elwspfx Abvshd distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Lodpfx Abex H Au Rjvjhd Sepro Linear robot available Accumulator English, French, Czech language available. Hours: 61000

Year of construction: 2018, condition: good (used), functionality: fully functional, machine/vehicle number: H3000TM, Universal testing machine H3000TM Made in Germany Crosshead stroke: 520 mm Working area depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm / min Return speed: 500 mm / min Travel resolution: 0.01 mm We have a very large selection of clamping fixtures - screw clamping fixtures - wedge clamping fixtures - pneumatic and hydraulic clamping fixtures. Pressure plates-bending fixtures-friction fixtures and much more. Strain gauges-extensometers-long displacement transducers-clamp-on transducers-clamping chambers. Force transducers optionally 50N-100N- 200N- 500N- 1000N- 2000N- or 3000N incl. Hess software Windows 8-9-10 or 11 for universal test sequences, simple tests even without a PC and a 5KN SP 56g screw clamp with pyramid or rubber jaws 30x50 mm Factory calibration certificate with DAkkS calibrated measuring equipment. In tension and compression direction in 10 steps. The universal testing machine of the H3000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a membrane keypad. The force and travel are shown on the 2-line LCD display. The testing machine can be used as a standalone unit or with a PC via a USB interface. The displacement is measured using an encoder with 0.01 mm visible resolution on the LCD Ljdst Rg H Aepfx Abvshd (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travel ranges, 500 mm or 1200 mm (with load cell without test tool). Additional scope of delivery: A load cell of your choice 50N-100N-200N-500N-1000N-2000N or 3000N, certificate 220 volt cable, USB cable, description, CE declaration of conformity. Load cell 3000N Measuring range:1-3000N tension and compression, with nom. 2mV/V Output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, reproducibility: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator Ljdpjyv D Hgofx Abvehd machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: used, Year of construction: 2008, operating hours: 10,113 h, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 156 cm³, injection pressure: 2,429 bar, total length: 6,000 mm, total width: 1,700 mm, total height: 2,190 mm, clamping force: 1200 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 780 x 735 mm min. mould height: 200 mm Lhjdpfsyv Dvbex Abvsd max. mould height: 450 mm max. open daylight: 850 mm opening stroke: 400 mm screw diameter: 35 mm swept volume: 156 ccm injection pressure: 2429 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A measures of machine l x w x h: 6m x 1.7m x 2.19m total weight: 9700KG

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Lhodpfxjttbd No Abvjd

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, warehouse no.: 503569 manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included: screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor machine without hopper loader Anti vibration mounts technical data robot-system handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 Lhedpfeyvz Izsx Abvsd year of construction: 2012 handling weight: 10 kg operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of manufacture: 2018 Injection Unit: Screw diameter: 80 mm Injection weight: 1464 g Injection pressure: 1855 bar Dosage volume: 1608 ccm Clamping Unit: Clamping force: 400 t Tie bar distance: 920x830 mm Platen size: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min./max. mould height: 400/900 mm Air valves x 4 Hydraulic core pull x 4 Hot runner control system x 36 Self-closing nozzle x 10 Injection unit hardened – bimetallic Proportional valve on injection unit – precise injection Automatic upper tie bar withdrawal function Machine has been regularly serviced by authorized Krauss Maffei service Krauss Maffei LRX 250 Robot Year of manufacture: 2018 Lhsdpfxoyvq Rfo Abvod High-speed robot 5-axis robot: 5 axes driven by servo motors (electric): X, Y (telescopic), Z, B (rotation), and C Vacuum Touch control panel Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 22,650 kg Length/Width/Height: 7.58x2.73x2.32 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the selected machine's technical testing or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Lhsdora Nrxspfx Abvod Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Lsdpfx Abeyvq N Iovshd Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request