Krones Checkmat 731 Fill Level Inspector (2019)

Krones Füllhöhenkontrolle

Condition: like new (used), Year of construction: 2024, functionality: fully functional, BRAND NEW COMPLETE KRONES CAN FILLING LINE Capacity: up to 90,000 cans per hour. Manufacturer: Krones Year of manufacture: 2023/2024 Condition: Brand new, unused, never installed, still in original packaging Availability: Immediate Electrical Voltage: 440 V Frequency: 60 Hz Hsdpfx Asxc E Rwoh Ueg Products: Beer, Carbonated Soft Drinks (CSD), Non-Carbonated Soft Drinks (Non-CSD) Filling temperature: 4ºC Compatible Can Formats: – 355ml – 204/202 – 355ml – 204 Sleek – 330ml – 211/202 – 473ml – 211/202 Secondary Packaging Options: – Tray with film – Film only – Pad with film Pack Formats Supported: – 6 x 4 – 3 x 2 – 3 x 4 Pallet Dimensions: – 1240 x 1100 mm – 1200 x 1100 mm – 1220 x 1020 mm – 1080 x 935 mm Line Composition: - PRESSANT UNIVERSAL 1A Container Sweep-off Depalletizer - CANTRONIC 709 D Empty Can Inspector - MODULFILL VODM-C 4.320-150-90 Can Filler - CHECKMAT 731 FM-X Inspection Unit - Foam Cleaning Module - LINAFLEX LC33.0-573-31 Product Treatment Unit - VARIOPAC PRO TFS-8 Shrink Packer - MODULPAL PRO 1AD Palletizer - LINADRY S2M Container Dryer x2 - CHECKMAT 731 FM-X Inspection Unit - SYNCO S Container Conveyor - MULTICO S Pack Conveyor - PALCO S Pallet Conveyor - Can Lid Feed Unit - OMEGA Stretch Wrapper - SYNCO Conveyor Lubrication System - Container Coding/Dating Unit - SYNCO Can Vacuum-Assisted Conveyor Coder - SYNCO Can/Liner Rinser – Linear Rinser - SYNCO Drip Pan Pipework System - SYNCO Can Vacuum Inspection System - Pack Inspection System - VJ 1620 UHS Pack Coding/Dating Device - Pallet Labeller - Uninterruptible Power Supply (UPS) - Electrical Power Distributor - Infield Cable Ducts and Cable Trays - Internal Machinery Piping For further information or to arrange an inspection, please contact us.

Condition: excellent (used), Year of construction: 2013, Kaeser screw compressors - various models Hodpfeqcu Rcjx Ah Uog

Year of construction: 2020, condition: new, Designed for plug in complete system on a mobile stainless steel base plate incl. juice pump, with 63KW Wolf Oil boiler, 2 heatexchanger, heat-holding section for approx. 20-30 second and automatic control. Components: Heating circuit, heating pump and expansion tank, 2 heatexchanger for juice preheating / recooling and heation uo to 80°C. 24 m heat-holding section, automatic pneumatic temperature control. Hedjcx R Ddopfx Ah Ujg Capacity 3000 l juice per hour (depending on juice temperature).

Year of construction: 2025, condition: new, functionality: fully functional, stainless steel construction for 2 Euro-Palettes with a loadinghight of 1500mm max 80 crates with 400 x300 x300mm L x B x H dimensions: widht: 2450mm height 2678mm lenght: 2050mm chamber dimensions widht: 2066 mm height: 1795 mm lenght: 1340 mm Thickness of Insulation 40mm Electronic Regulation of Pasteurizationprocess: Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Adjustment of required holdingtime on Pasteurizationtemperature Adjustment of switch-off temperature electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 100 4 pcs. adjustable Feets Steamconsumption: approx.:. 80 kg / H at 1 bar electric power consumption: 5,5kW Hjdpsclq Ixofx Ah Ueg weight: approx. 650 kg

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, Hsdpfx Asiqkc Ish Ueg travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Year of construction: 2022, condition: new, machine/vehicle number: SK1200, Semi-automatic sauerkraut, kimchi(for other products specify) filling machine. The machine is intended to fill products in Jars, Buckets, Pouches. Made of acid-resistant stainless steel materials AISI 304, 316. The product is filled with volumetric filler. Liquid filler, a transporter for product loading are optional. The machine can be equipped with wheels for easy transportation. Equipment can be attached with conveyor, round tables or can be put under filling nozzles manually. Hjdpfjffwftjx Ah Usg Technical information Filling range 250-1000 g (or specify) Productivity 800-1200 jars/pouches per hour Pneumatic pressure 0,8 MPa Air consumption 6,0 Nm3/h Electric connection 400V/50Hz/3phase Service staff 1 person Dimensions 1500x450x1350 mm Weight 180 kg

Year of construction: 2025, condition: new, Nominal capacity 3000kg/h (depending on fruits & operating condition, up to 6000kg/h) Yield up to 75% Belt width/length: 1000mm/approx. 7000mm Hsdpfx Ajygmweh Uog Working width/high: 900mm/0-50mm continuously Belt speed continuously variable 1,0-5,2m/min Electrical supply: Drive motor 2,2 kW 400V Washing motor: 0,25 kW 400V Waterconsumption for belt cleaning: Approx. 3 l/operating minute Weight approx. 2300kg Dimensions: (lxwxh) 2750x1890x1690mm without high-pressure cleaner and without compressor

Condition: like new (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, Technical data: - Capacity: 54,000 bph on 250 ml - Formats: 250 ml / 500 ml / 1,000 ml / 1,500 ml - Filling product: Water and non-carbonated beverages - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Hjdpfoxvda Dex Ah Ujg Equipment included: - Krones Preform Contifeed Orienter Feeder - Krones 24-cavity Blow Molder, model Contiform 324 Pro - High pressure air compressors, low pressure and high pressure booster - Krones 88-valve Volumetric Bottle Filler, Modufill PET with 33-head capper set for 26.7 mm - Krones model Capcade, cap hopper – cap feeder for flat caps - Fogg model 756-5-5-12-U-19, cap hopper – cap feeder for sports caps - Krones Checkmat Inspection System - Krones Linadry Air Knife System - Two (2) Krones Contiroll 8100 Hot Glue Wrap-Around Roll Feed Labelers - Two (2) Krones Checkmat Inspection Systems, post-label - Markem-Imaje Coder SLC350 - Krones stainless full-bottle conveyor and controls - Krones full case conveyor from packer discharge to palletizer infeed - Krones Robobox Case Orienter - Krones Modulpal Case Palletiser - Krones Palco full pallet discharge roller conveyor from palletizer to wrapper - Wulftec pallet wrapper with infeed and discharge pallet conveyor, model WCRT-200 - Ingersoll-Rand low pressure compressor (plant air), model IRN100N-OF (VSD) - Ingersoll-Rand low pressure receiver tank and air dryer - Atlas-Copco low pressure model ZR315VSDFF (paired with HPC-001) - Atlas-Copco high pressure air compressor booster - Manchester high pressure receiver, model 303724–600 gal *All equipment has already been dismantled and was serviced by Krones technicians The line is ready for shipment Installation and commissioning can be included in the offer

Year of construction: 2024, condition: new, machine/vehicle number: KU 2400, The cabbage coring machine provides the ability to cut cabbage core out of the head or more often, crush the stalk (then there is an opportunity to use raw materials 100 percent, it is also useful for the quality of sauerkraut). Combined electric and pneumatic power.​ General Features: All materials that come in contact with products are made from food-grade materials Productivity is up to 2400 heads per hour Two coring lines Can be used to cut irregular shape cabbages also Easy to clean, can be washed with low-pressure water; Can be equipped with wheels with a fixation for easy transportation; Can work separate as well in line with cabbage shredder SS80 7500kg/h Hsdeffwfyspfx Ah Uog Various electrical connections and standards available on request;

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Hsdpfxovgu D Se Ah Ueg Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.