Industrial robot

Kuka KUKA KR6

Condition: ready for operation (used), Year of construction: 2001, Two identical Kuka industrial robots are available. Reach: approx. 1500mm. Accuracy: +/-0.15mm. Control system: Kuka KRC 1. 4 CNC axes have been added to one robot. Including: 2x hand-held programming devices (PHG) and 2x control cabinets. Documentation: available. On-site inspection is possible. Gbsdpov Dagasfx Abush

Condition: good (used), Robot Gjdpjbrhtdefx Abujbh Manfacturer: Staeubli Type: RX170

Condition: ready for operation (used), An Akon welding cell including Kuka robot and 2x Dinse welding sources is available. 1) Welding robot: Kuka KR 6 R900, payload: 6kg, reach: 900mm, control: KR C4 Compact, flange load: 25kg, total weight: approx. 170kg. 2) Automatic welding cell Akon Robotics with turntable and Kuka control system. 3) Welding power source Dinse Dix PI 900. The EP motor for the 4th axis was replaced in 2023. Documentation available. On-site inspection is possible. Gbedpfx Ajv H Dfxebueh

Condition: ready for operation (used), Year of construction: 2015, overall weight: 87 kg, load capacity: 6 kg, arm reach: 706 mm, Kuka 5-axis robot KR6 fivve Maximum reach 706.7 mm Maximum payload 6 kg Position repeatability (ISO 9283) ± 0.03 mm Number of axes 5 Installation position Floor Installation area 320 mm x 320 mm Weight approx. 48 kg Axis data Range of movement A1 ±170 ° A2 -190 ° / 22,6 ° A3 5 ° / 156 ° A4 - A5 -117,6 ° / 90 ° A6 ±350 ° Operating conditions Ambient temperature during operation 5 °C to 45 °C (278 K to 318 K) Protection class Protection class IP54 Gbodpfxsqy E Rpj Abush Protection class central hand IP54 Controller: KR C4 compact Operating pendant: KUKA smartPAD Including Schunk gripper and connection cable Profinet, Ethercat, X11 Incl. Murr MVP12 and IFM PQ7834 pressure sensor

Condition: new, Year of construction: 2024, ♻ The MONSTER is a hybrid machine with two shaft PRE- SHREDDER P150 TWIN (with two reduction gearboxes) combined with one shaft SHREDDER SD90XL for efficient shredding of various types of pallets, styroform, plastic, waste, scrap and electrical devices. ✔ Power: 30 kW + 1x 5,5 kW-9,2 kW (shredder + pre-shredder) ✔ Shaft length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Shaft diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Shaft RPM: 80-120 + 5,3-10,3 rpm (shredder + pre-shredder) ✔ Number of cutting knives: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/h* ✔ Material: Pallets, styrofoam, electronic waste, plastics, wood,... ✔ Filling opening: 2072 x 1070 mm ✔ Dimensions L/W/H: 3,73/1,78/2,67 m Gsdpfx Abohwwplousbh ✔ Weight: 4200 kg 2 years warranty or 2000 working hours

Condition: excellent (used), Year of manufacture: 2018 Weight: 52 kg Payload: 6 kg Reach: 901 mm Positioning accuracy: ±0.03 mm Number of axes: 6 Control: KUKA KRC4 Gsdpjxt Nv Eofx Abujbh

Condition: good (used), Year of construction: 2011, Industrial robot Manufacturer: Kuka Model: KR6-2 Gbodpfotqvg Esx Abush Year of manufacture: 2011 Reach: 1611 mm Weight: 235 kg Payload: 6 kg Kuka controller KRC2ed05 Weight: 185 kg Processor: 2GHz Operating system: WinXP Software version: V5.6.11 Kuka teach pendant KCP2ed05 Kuka connection cables 22126ä

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Tyop GA 250 Godpfepl D Hxsx Abuebh

Condition: good (used), Year of construction: 2010, Industrial robot Manufacturer: Kuka Model: KR16L6-2 Year of manufacture: 2010 Reach: 1911 mm Weight: 240 kg Payload: 6 kg Kuka controller KRC2ed05 Weight: 209 kg Gjdpfxotphqhe Abuobh Processor: 2 GHz Operating system: WinXP Software version: V5.6.11 Kuka teach pendant KCP2ed05 Kuka connection cables 7 m / 15 m

Condition: good (used), Industrial Robots Manufacturer: Kuka Models: KR6, KR6-2, KR6arc Models: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F All models equipped with KRC2ed05 control system Kuka KR6 KRC2ed05 Year of manufacture: 2006 Kuka KR6-2 KRC2ed05 Year of manufacture: 2011 Kuka KR6arc KRC2ed05 Year of manufacture: 2006-2007 = several units in stock Kuka KR16L6 KRC2ed05 Year of manufacture: 2009 Kuka KR16L6-2 KRC2ed05 Year of manufacture: 2011 Kuka KR16 KRC2ed05 Year of manufacture: 2007-2009 = several units in stock Kuka KR16-2 KRC2ed05 Year of manufacture: 2010-2012 = several units in stock Gedpetuc U Refx Abusbh Kuka KR16-2 Speed KRC2ed05 Year of manufacture: 2012 = several units in stock Kuka KR16-2 Foundry KRC2ed05 Year of manufacture: 2012

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Gbedpfxewbhq Hj Abuoh Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2017, Industrial robot Manufacturer: Kuka Model: KR16L6-2 Year of manufacture: 2017 Robot was completely overhauled in 2023 Reach: 1911 mm Gjdpfx Absrq D Hreuebh Weight: 240 kg Payload: 6 kg Kuka control KRC4 Weight: 145 kg Software version: V8.5.4 Kuka touch panel Kuka connection cables 22126ä

Condition: good (used), Year of construction: 2012, Industrial robot Manufacturer: Kuka Model: KR6-2 Year of manufacture: 2012 Operating hours: 2,500 Reach: 1611 mm Gedpfxjiryyle Abuobh Weight: 235 kg Payload: 6 kg Control unit: KRC4 Weight: 145 kg Software version: V8.2.19 Touch panel: Kuka KCP4 Connection cables 22126ä

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Gbsdew Sy T Hepfx Abuoh

Condition: good (used), Year of construction: 2003, Kuka KR6 Built in 2003 Reach 1500 mm Own weight 222 kg Load 6 kg Control KRC2 Weight 185kg Software version V4.1.7SP08 Gbedeb Nrgnspfx Abuoh Kuka KCP2 Connection line 7m Availability: In stock