Labu Braublock 5/10hl Brewhouse (2017)

Labu Sudhaus

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Hedjwxmb Espfx Abgop Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: good (used), Year of construction: 2001, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table length: 3,800 mm, table width: 1,000 mm, table load: 30,000 kg, Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Tool blocking power 1968 daN Full set books and 1e owner machine X-Axis: 3200mm Y-Axis: 1200mm Z-Axis: 1460mm Table Length: 3800mm Table Width: 1000mm Table load: 30000 Power on spindle: 41kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Hodjxc Hh Dspfx Abgop Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 10659H Length: 8820mm Width: 6250mm Height: 3910mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable Hsdpfxjviq U Eo Abgop With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg Hjdjftm Hrspfx Abgsp HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 2012, Overview  This brewhouse and utilities package was manufactured between 2001 and 2023 by European manufacturers including Slowbeer, GG-Technik, Lavor, Sommer, Quantor and others. The package centers around a 500 L brewhouse and includes steam generation, milling, cooling, compressed air and transfer pumps. Personal inspection is possible, Technical data  Brewhouse capacity: 500 L Configuration: 3 kettles + hot water tank + cold water tank + boiler Steam heated Cooling capacity: 35.8 kW Scope of Delivery  Brewhouse | Slowbeer | MB-500MAN | 2012 | 500 L, incl. tanks & boiler Steam Generator | GG-Technik | TD9 | 2016 | 5 kW Steam Generator | Lavor | GV Vesuvio | 2014 | 18 kW, serviced 2025 Malt Mill | Sommer | Piccolo 11 S | 2012 | Grain mill Cooling Unit | Quantor | Q352RHQ | 2021 | 35.8 kW Air Tank | Fiaseis | Coinox | 2023 | 270 L, stainless steel Compressor | CompAir | WinVOM L15 7.5 | 2001 | — Transfer Pump (2x) | Ebara | CDXM-B120-20 | — | Stainless steel Air Dryer | — | E2000 | 2001 | Air drying unit Hjdoyg R Dlepfx Abgop

Condition: used, Manufacturer: Dreher Condition: Used Stock Number: 3175 Line is consisting of: Dreher 2 vessel brew system Type: KBA500 Year: 2006 Kettle: 550 litres Heating: 42 kW Controls KBA basic 3x Dreher fermenting tanks Type: GW500 Year: 2006 Content: 520 litres With Dreher ZKV120 cooling 3x Dreher / Brovarni dispensing tanks Type: 500 L CCT Year: 2017 Content: 500 litres 1x Dreher brite tank Content: 1000 litre 6x Dreher Kombi-tank Type: KT500 Year: 2006 Content: 500 litres 5x FIB beertanks Type: 70200503 Year: 2022 Content: 540 litres Auxiliary equipment a.o. - Gail 103 grain mill - Enotecnica Pillan srl F30 20x20 filter - Serrco SW-150 cooling water tank - bottle washing station - bottle filling machine - corking device - 45x 20 litre kegs - working table Hjdpfx Aeyzyy Hsbgop - double sink

Condition: excellent (used), Year of construction: 2013, 1 used rapid steam generator ----- Manufacturer: CERTUSS Model: Junior 102 SC EG Steam output: 120 kg/h Max. thermal output: 79 kW Operating overpressure: 10 bar Water content: 9.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2013 Equipped with Certuss gas burner, gas control section, control cabinet mounted on boiler body, and existing coarse and fine fittings With feedwater module mounted on base frame consisting of: control cabinet, stainless steel feedwater tank, steam dryer, Hsdsyfg Htopfx Abgjp dosing vessel, Speck feedwater pump and sample water cooler

Condition: excellent (used), Year of construction: 2011, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 360. Year of manufacture: 2011. Steam output: 360 kg/h. Maximum steam pressure: 13 bar. Delivery available at extra cost. Inspection on site possible. Please contact us if you have any questions. Hsdeydqxdspfx Abgop

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. • A (rotation): ±125° • Spindle Type: Electric, air-cooled • Tool magazine: • Located in the middle of the machine base in a protected area • Accommodates various tools: milling cutters, taps, end mills, angle heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum lubrication system (MQL) • Working range: Hedjx D I Hkspfx Abgsp • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm) Hjdpfxevwgmgj Abgsp