ABS Universal Deburrer -Table Deburrer

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer was €486,000 (net)! TECHNICAL DETAILS Ffjdpfxeymwzdo Aa Eow Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly duty cycle: 1,500,000 pages Supported paper sizes (min.): 182 × 182 mm Supported paper sizes (max.): 330.2 × 487.7 mm Paper weight range: 60 g/m² up to 350 g/m² Paper weight range (validated): up to 400 g/m² Duplex printing media weight: 350 g/m² MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Main unit dimensions C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like quality Supports specialty and textured media In-line sensors for color management Automatic calibration

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) Ffedpofg E Hlofx Aa Ejw • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7F001-7, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, No reserve price – guaranteed sale to the highest bidder! According to the manufacturer, the year of manufacture is likely 2015. TECHNICAL DETAILS Measuring range X-axis: 300 mm Fjdpfx Aaeyl U S Do Eefw Measuring range Y-axis: 200 mm Measuring range Z-axis: 150 mm Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Maximum traverse speed X, Y, Z-axis: 160 mm/s Measuring accuracy of optical sensor X, Y-axis: Ex, Ey = (1.6 + L/250) µm Measuring accuracy of optical sensor XY-axis: Exy = (2.0 + L/250) µm Measuring accuracy of optical sensor Z-axis: Ez = (3.9 + L/200) µm Measuring accuracy of touch-trigger probe X, Y-axis: Ex, Ey = (2.0 + L/250) µm Measuring accuracy of touch-trigger probe XY-axis: Exy = (2.5 + L/250) µm Measuring accuracy of touch-trigger probe Z-axis: Ez = (2.9 + L/200) µm Measuring volume, optical sensor X: 300 mm Measuring volume, optical sensor Y: 200 mm Measuring volume, optical sensor Z: 150 mm Measuring volume, tactile sensor X: 230 mm Measuring volume, tactile sensor Y: 200 mm Measuring volume, tactile sensor Z: 150 mm MACHINE DETAILS Metrology software: PC-DMIS Vision CCD camera zoom: 6.5x CNC motorized Dimensions & Weight Dimensions (L x W x H): approx. 705 mm x 986 mm x 890 mm Machine weight: approx. 170 kg SCOPE OF DELIVERY PC including PC-DMIS Vision measuring software Documentation / manuals Workpiece clamps / stops for securing the items to be measured Various probes included Probe change rack for storing 4 probes

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 2183, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, controller model: GE Fanuc Series 16-M, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 450 mm Spindle speed max.: 60,000 rpm Spindle speed min.: 9,000 rpm Feed rate X-axis: 2,000 mm/min Feed rate Y-axis: 2,000 mm/min Feed rate Z-axis: 900 mm/min Fjdpfx Aoyl U Nvea Eefw Rapid traverse range: 0.5 – 14,000 mm/min (infinitely variable) Table dimensions: 600 x 380 mm Max. table load: 300 kg Tool holder: Collet EX 19, grinding arbors E19 MACHINE DETAILS CNC controller: GE Fanuc Series 16-M Input voltage: 400 V Control voltage: 24 V Power consumption: 7,500 W Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,250 x 4,000 x 3,250 mm Total weight: 4,500 kg EQUIPMENT Documentation/manual Extraction system Coolant system Sealing turbine

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Ffsdpfx Aajd Ev Upj Eow Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 15,513 h, machine/vehicle number: 31662, controller manufacturer: Cadman, bending force (max.): 137 t, working length: 3,100 mm, TECHNICAL DETAILS Pressing force: 1,350 kN Working length: 3,100 mm MACHINE DETAILS CNC control: Cadman Axes: Y1, Y2, X, X1, R, Z1, Z2 Operating hours Total on-load hours: 15,513 h Motor running hours: 28,347 h EQUIPMENT CNC crowning Fjdpfxoylwg Do Aa Esfw Angle measuring system (not connected) Wila hydraulic upper and lower clamping

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Delem DA 66W, bending force (max.): 234 t, overall weight: 20,000 kg, working length: 4,300 mm, TECHNICAL DETAILS Bending force: 2,300 kN Working length: 4,300 mm Distance between uprights: 3,700 mm MACHINE DETAILS CNC control: Delem DA 66W CNC-controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Power: 26 kW Voltage: 230/400 V Fodsylwbhepfx Aa Esfw Weight: 20,000 kg EQUIPMENT CNC crowning system Hydraulic Wila New Standard upper and lower clamping

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm Fsdpfx Aeb Tdquea Esfw tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 9550006, bending force (max.): 254 t, stroke length: 265 mm, overall weight: 18,900 kg, working length: 4,100 mm, TECHNICAL DETAILS Working length: 4,100 mm Pressing force: 2,500 kN Max. stroke: 265 mm Rapid traverse speed: 190 mm/s Ffodpfx Aajylv T Ne Esw Working speed: 10 mm/s Return speed: 150 mm/s MACHINE DETAILS Electrical data Main motor power: 22 kW Total connected load: 26 kW Line voltage: 3 PH 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Rated current: 63 A Weight: 18,900 kg EQUIPMENT Bending aid

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 4,970 h, machine/vehicle number: HFP 130-3 N050242, bending force (max.): 132 t, stroke length: 200 mm, overall weight: 8,170 kg, working length: 3,100 mm, TECHNICAL DETAILS Pressing force: 1,300 kN Max stroke: 200 mm Working length: 3,100 mm MACHINE DETAILS 8-axis configuration: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Ffsdpfxeylv Rho Aa Ejw Weight: 8,170 kg Voltage: 400 V Frequency: 50 Hz Rated current: 213 A Operating hours: 4,970 h EQUIPMENT Automatic Fiessler Alas laser system Euro-style tool clamping with quick-change adapters

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new Fsdpenah Tajfx Aa Esfw The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 66654, sheet thickness (max.): 6 mm, working length: 4,050 mm, TECHNICAL DETAILS Working length: 4,050 mm Maximum sheet thickness: 6 mm MACHINE DETAILS Voltage: 380 V Fodpfxeylv Nwo Aa Eefw EQUIPMENT Electrically adjustable back gauge Electrically adjustable cutting angle Electrically adjustable blade gap Electrically adjustable blade gap

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 20345, sheet thickness (max.): 10 mm, working length: 4,000 mm, TECHNICAL DETAILS Max. sheet thickness: 10 mm Working length: 4,000 mm Fodpfxoylv Itj Aa Esfw MACHINE DETAILS Voltage: 380 V 50 Hz EQUIPMENT Electric backgauge

Condition: used, Year of construction: 2021, saw blade diameter: 800 mm, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Crosscut saw AS Very good, well-maintained condition Saw blade diameter 800mm. Sturdy tubular steel base frame. Powerful saw motors. Pneumatic material clamps (3 vertical). 2-hand safety operation. Coolant device. Protective hood. Optionally with length measuring system or automatic positioning system. Version as automatic saw-drilling machine or automatic saw-punching machine on request. Fjdpjd Szf Njfx Aa Eofw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: B8643, sheet thickness (max.): 4 mm, overall weight: 6,200 kg, working length: 3,100 mm, TECHNICAL DETAILS Max. sheet thickness: 4 mm Ffedpjylv E Sjfx Aa Ejw Working length: 3,100 mm Max. working pressure: 300 bar MACHINE DETAILS Weight: 6,200 kg Connected load: 11 kW Connection voltage: 3 x 400 V 50 Hz EQUIPMENT Touchscreen control Automatic sheet thickness and angle adjustment