18WTR00016

MAIN TECH

Condition: excellent (used), Year of construction: 2024, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 2MAM022829, cooling capacity: 1,000 kW (1,359.62 HP), Cooling Capacity: 959 kW Type of Input Current: 3 Phase / 50 Hz / 400 V Type of Cooling: Air-cooled Overall Weight: 7,973 kg (Operating) / 7,597 kg (Rigging) Ambient Temperature (max.): 35°C Ambient Temperature (min.): 12.8°C (based on part load performance) Tsdpfxsimz Uao Adisf Compressor Type: Screw, semi-hermetic, VSD controlled Total Power Consumption: 309.9 kW Noise Level: 74 dB(A) 10 m Refrigerant Type: R134a, total charge: 242 kg Water Flow Rate: 146.7 m³/h (40.76 L/s) Pressure Drop (Evaporator): 52.2 – 64.1 kPa COP (Full Load): 3.09 IPLV (Part Load): 5.12 Number of Fans: 14 units (7+7), with low sound kit Nameplate Available: Year of Manufacture: 2018

Condition: new, machine/vehicle number: Baureihe GSP, When crushing long pipes and profiles, conventional granulators are faced with considerable problems. In most cases, pits or platforms are needed to allow feeding of the long and bulky parts. Tedpfx Adjghgftoijf This is why ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be conveniently fed and the risk of blockage is eliminated as the machine doses automatically. In the event of overfilling of the grinding chamber, no further material is accepted until work can continue without motor overload. ZERMA also offers a wide range of options such as exhaust systems, conveyor belts, metal detectors, fines separators, etc.

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY Tedpeftm Hrjfx Adief - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2257 Measurements depth 4035 Measurements height 2538 Machine weight 10000 Control Unit Brand OKUMA Model OKUMA OSP-P300SA Movement X-Axis Movement 580 mm (+480/-20 mm) Y-Axis Movement 160 mm (+80/-80 mm) Z-Axis Movement 935 mm Tedpfowmg U Iex Adijf B-Axis Movement 225° (-30°/+195°; 0.001° increments)225° (-30°/+195°; 0.001° increments) C-Axis Movement 360° (0.001° increments) Tools Slots in storage 40 Media Chip conveyor Yes Additional Equipment Thermal Stability Concept (TAS-S & TAS-C) Full enclosure and LED workspace lighting Hydraulic power unit for basic machine operations 3D Simulation and collision avoidance (CAS) This 5-axis Okuma Multus B300 II turn-mill centre was manufactured in 2023, featuring a max turning diameter of 630 mm and a machining length of 900 mm. It includes a collision avoidance system, thermal stability, and an easy-to-use OSP-P300SA controller with a 15” touch screen. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: like new (used), Hello, we offer here a used Erowa adapter pallet PowerChuck P automatic, pallet was only for demo purposes in use. Condition as new. ER-115304. shipping and inspection possible For questions we are happy to answer. Tsdslz Nb Nopfx Adief

Condition: used, Good day, We are offering used clamping devices from Erowa. These are part of the Erowa UPC system and are suitable for die-sinking EDM and milling. The following parts are available: ER-048377 UPC Alignment pallet Erowa T-slot pallet 320x320 Base body made of aluminum, bars hardened and ground. ER-016917 UPC Aluminum pallet 320 x 320 x 40 with clamping bar They have been cleaned and checked by us. A functional test was also carried out. The clamping devices have signs of use and are technically in very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us. Todpfotk Hakox Adisf

Year of construction: 2022, condition: as good as new (ex-display), Air handler with EC technology for hall air conditioning or heating, cooling capacity in combination with a chiller unit: 150 kW at 7/12°C, heating capacity 300 kW, airflow 20,000 m³/h, 4x500 mm air outlets, compact design. Tjdsfzrgyepfx Adijf

Condition: excellent (used), Bitzer Here we offer you a refrigeration unit. Was built but never used Starting current (rotor blocked) 135/220 A Supply voltage 400/3/50 V/Ph/Hz max. operating current 53 A max. power consumption 30.1 kW delivery volume: 101.10 m³/h (HD) 50,50 m³/h (MD) Motor (nominal): 30 HP 22 kW Oil filling BSE32 Option: BSE55 at R134a, tc > 70°C Oil quantity 4,75 l Refrigerant R452A Reverse osmosis filter and humidification system included Reverse oasmosis data: Permalefficiency 10 l/h Feed water requirement 40 l/h Operating pressure 14 bar Dimension: 500*600*295 mm H*W*D Tsdpfohwmtvex Adiof Type: BS6 S6F-30.2Y-40P + Bitzer condenser water cooled K573H + RO20 Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Good day, We are offering used clamping beams from Erowa, System 3R and Becker Erodiertechnik. These clamping beams are suitable for wire erosion. The following parts are available: ER-017646 ER-017647 ER-017648 ER-021128 ER-021127 System 3R 3R-239-545-9911-V01 Becker erosion technology SB430-SB680 The clamping devices have signs of wear and are in very good technical condition. Individual acceptance also possible. Spare parts and accessories are available. Do you have any questions? Then we are at your disposal. Tjdpfetk N E Aox Adisf

Condition: new, Year of construction: 2024, Handheld laser welder LWH-1000-N Gefasst SUP 20S The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Tsdpehufigsfx Adief Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Gefasst SUP 20S laser head - Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.