Second-hand machinery for sale (200,000)

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 54, functionality: fully functional, pressing force: 60 t, table width: 1,100 mm, table length: 3,000 mm, The machine is in like-new condition! Submitting a bid obligates you to pick up the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, and Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. TECHNICAL DETAILS Punching force: 60 t Table size: 1,100 × 3,000 mm EQUIPMENT Setup operation Automatic operation Continuous operation Gsdpfozzny Sjx An Ijug Wiring diagrams Operating manual

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Operating pressure max.: 13 bar Gsdpfxozzmw Nj An Isug Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 8,255 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 575 mm, For sale is a machine island consisting of two wire EDM machines, ZK Genius 700, with the corresponding Chameleon Quad automation system! The entire system is in very good used condition. The system consists of the following components: 1x ZK Genius 700, year of manufacture 2015, with 22,056 operating hours 1x ZK Genius 700, year of manufacture 2019, with 8,255 operating hours 1x Chameleon Quad, year of manufacture 2015 TECHNICAL DETAILS Wire EDM machines Zimmer & Kreim Genius 700 Travel in X-axis: 400 mm Travel in Y-axis: 350 mm Travel in Z-axis: 350 mm Table size: 575 × 500 mm Maximum workpiece weight: 700 kg Axes: Controlled C-axis and rotating spindle Processing modules: C-module for hard metal, PCD or etching processing Processing modules: O-module for very fine surface roughness Software: CIMCO Editor for path erosion Automation Chameleon Quad Electrode positions: 176 UPC pallet positions: 9 Loading system: Loading drawer MACHINE DETAILS Wire EDM machine 1 Manufacturer / Model: Zimmer & Kreim Genius 700 Year of manufacture: 2015 Operating hours: 22,056 h Wire EDM machine 2 Manufacturer / Model: Zimmer & Kreim Genius 700 Year of manufacture: 2019 Operating hours: 8,255 h Automation Manufacturer / Model: Chameleon Quad Year of manufacture: 2015 EQUIPMENT CO₂ fire extinguishing system from Kraft & Bauer Extraction system Double rotary gripper for Erowa ITS Gusdpfozy Hn Esx An Ieg Single gripper for UPC pallets Loading drawer for UPC pallets

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 1,100 mm, measuring range Y-axis: 1,100 mm, measuring range Z-axis: 750 mm, table load: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring range, X-axis: 1,100 mm Measuring range, Y-axis: 1,100 mm Measuring range, Z-axis: 750 mm Travel length, X-axis: 1,100 mm Travel length, Y-axis: 1,100 mm Travel length, Z-axis: 750 mm Max. traverse speed: 350 mm/min Table length: 2,050 mm Table width: 1,100 mm Max. workpiece weight: 2,000 kg Table load: 2,000 kg Distance between columns: 1,100 mm MACHINE DETAILS Input current type: Alternating current (AC) Input voltage: 400 V Compressed air connection: 6 bar Operating pressure: 6 bar Operating temperature: 22 °C Ambient temperature: 16–30 °C Dimensions & Weight Dimensions (L x W x H): 2,050 x 1,890 x 2,700 mm Total weight: 2,800 kg Year of last overhaul: 2013 EQUIPMENT Virtual DMIS Software V7.0 OnMotion Upgrade Kit with Servo Tower, Joystick Box, and interface cables PC with OnMotion hardware and Virtual DMIS V7.0 5 used TP20 measuring probes Gusdpfxszy Ezds An Ieg Documentation / Manual Nameplate Note: Due to age, the cables between the machine and the controller are stiff and brittle. Disconnecting and transporting them may result in the need to replace individual connection cables or connectors. However, this can be done easily with some knowledge.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 1,332 h, construction height: 180 mm, construction width: 220 mm, No minimum price—guaranteed sale to the highest bidder! Markforged Metal X TECHNICAL DETAILS Printing process: ADAM – Atomic Diffusion Additive Manufacturing Build volume: 300 × 220 × 180 mm Max. part size: 250 × 183 × 150 mm Max. part weight: 10 kg Layer height after sintering: 50 µm and 125 µm MACHINE DETAILS Supported materials: Copper, 17-4PH stainless steel, Inconel 625, H13 tool steel, D2 tool steel Print chamber: heated Print bed: heated, vacuum-sealed print plate, automatic print bed leveling Printing system: two nozzles for metal material and release material Dimensions & Weight Dimensions: 575 × 467 × 1,120 mm Weight: 75 kg Power supply: 100–120 / 200–240 V AC Current consumption: 12 / 6 A Connection: IEC 60320 Type C20 Operating hours: 1,332 h EQUIPMENT Markforged Wash-1 Debinder Markforged Sinter-1 Sintering System Markforged Wash-1 TECHNICAL DETAILS Debinder Supported materials: all metals Cleaning media: Opteon SF79, Opteon SF80, or Tergo Metal Cleaning Fluid Control: integrated control system Workpiece holder: Stainless steel basket Washing area: 356 × 254 × 203 mm Washing volume: 18,356 cm³ MACHINE DETAILS Power supply: 110–120 V AC, single-phase Current consumption: 11 A Peak power consumption: 1,320 W Dimensions & Weight Dimensions: 609 × 685 × 1,067 mm Weight: 136 kg FEATURES Integrated control system Stainless steel basket Shut-off at low fluid level Shut-off at high vapor pressure Markforged Sinter-1 TECHNICAL DETAILS Furnace specifications Gusdpfx Anszx Rkbe Ijg Supported materials: chemically debound parts printed with Metal X Heating element: Kanthal Control: preprogrammed automatic cycle control Sintering cycle: 26 h Max. internal temperature: max. 1,300 °C Sintering capacity: 141 mm inner diameter × 305 mm length Sintering volume: 3,020 cm³ Sintering surface area: 348 cm² for a ceramic setter plate Setter plate dimensions: 11.4 × 30.4 cm Process gases: argon, argon-hydrogen mixture Retort: high-purity, carbon-free refractory retort MACHINE DETAILS Exhaust air requirement: 100–150 CFM, external exhaust Power supply: 200–240 V, single-phase Current consumption: 30 A Recommended circuit breaker rating: 50 A Dimensions & Weight Dimensions: 1,270 × 510 × 720 mm Weight: 136 kg FEATURES Pre-programmed automatic cycle control Kanthal heating element Ceramic setter plate High-purity, carbon-free refractory retort

Condition: used, Used Eiger model 5L SSE EXD stainless steel bead mill. Stainless steel chamber measures approximately 360mm x 200mm diameter. Unit is driven by 10hp, 420volt, 3/50 electric motor. Includes local controls. Gjdoz Ah Skspfx An Isug

Condition: used, Reportedly unused Sinclair Stainless Fabrications approximately 20,000 litre nominal capacity vertical 316L stainless steel fermenter/bioreactor, approximately 15,000 litre working capacity with (4) zone limpet coil jacket. Unit has a welded dished top and bottom. Internal rated -1/+3barG internal operating at 0-159degC. Internal coils rated -1/+5barG and limpet coils rated -1/+5barG operating at 0-159degC. Godeyln E Rjpfx An Ioug Mixer Drive = Nominal Speed: 100 RPM; Motor: 55KW 1500RPM 250 IE3 IP55 3PH 230/400V 50HZ; Gearbox Input Coupling: Integral w/Gearbox; External Paint Finish: Standard Paint; Colour: Blue RAL5005 Mounting = Arrangement: Structural Nozzle w/Flange Shaft Seal = Mechanical Seal: Custom Seal - No Bearing Balanced (AES CDM C/SiC/C/SiC-AFLAS(3) - Double Mechanical Seal. ) Mounting Flange = Flange Size: DN400 [16”]; Flange Class: CL-150; Flange Material: 316 Stainless Steel Face & Core Shaft = Shaft Diameter: 4-1/2”; Shaft Extension: 6754 mm; Shaft Material: 316 Stainless Steel Impellers = Impeller #1: 921 mm BT-6; Impeller #2: 959 mm W-4; Impeller #3: 959 mm W-4; Impeller #4: 959 mm W-4; Impeller Material: 316 Stainless Steel Mixer Options = Gearbox with Food Grade Lubricants Design Compliance = Machinery Directive 2006/42/EU Specifications: Capacity: 15,000 L Type of stainless: 316L Internal Pressure: -13 bar Internal Temperature: 0°C Jacket Pressure: -15 bar Jacket Temperature: 0°C Diameter: 1,800 mm Straight Side: 5,900 mm Legs/Lugs: Mounted on (4) legs Weight: 6720kg Dimensions: 2400mm diameter x 7500mm height

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm Godpfexw Ilmjx An Ijug X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Swarf conveyour Renishaw Toolsetter

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control Guodpfxszaix Ij An Ijg 3 jaw SMW chuck 720mm swing 2000mm between centres 8 station turret Coolant pump and tank Swarf conveyor

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control 3 jaw 10 inch Pratt and Barnet manual chuck 10HP spindle Quick change tool post Tailstock Gusdpfezakk Ejx An Isg Coolant tank and tray 6 tool holders

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control Gsdezakgtjpfx An Ioug 3 jaw Kitagawa chuck 620mm swing 1000mm between centres 10 station turret Tailstock Coolant pump and tank Swarf conveyor

Condition: good (used), functionality: fully functional, Machine Name - Colchester Machine Model - Triumph 2000 Guodpfx Anjuk H Rbj Isg Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray

Year of construction: 1998, condition: ready for operation (used), 200 Ton press 230mm stroke Speed 25-35 SPM Die height 500mm slide adjustment 110mm Main motor 20HP Air pressure 5kg/cm2 Gjdpszp Dnzofx An Ieug Y.O.M 1998

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Gjdpfx Answxmhlj Isug Manual vice

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Call or email for further details Gjdpfx Anoxw Ilts Ijug

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, Equipment: chip conveyor, documentation/manual, Machine Name - Okuma Machine Model - MX45VAE Y.O.M 2000 Descriptions - OSP 700M Spindle Speeds 7000 rpm Gjdpfx Ajzair Uen Ioug BT40 taper Table Size 1000 mm x 460mm X – Axis Travel 560mm Y – Axis Travel 460mm Z – Axis Travel 450mm 20 station ATC Renishaw tool setter Renishaw work probe Coolant system and conveyor 2 x identical machines available

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck Gsdpfx Aozb Ipzsn Isug 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Gedpfeq A I Aaex An Ijug Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12 Guedpfx Aotwgirsn Isg

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Y axis working area: 2185 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 20 Gujdpfxjyngzvo An Ieg

Condition: used, machine/vehicle number: 008653, Max. panel width: 3200 mm Max. panel length: 3200 mm Gedpfx Aezvwqcon Ioug Main saw blade projection: 150 mm No of Grippers: 9

Condition: used, machine/vehicle number: 008594, X axis working area: 3100 mm Y axis working area: 2200 mm Working Table: Flat table Gusdozvwqvopfx An Isg Main Electrospindle power: 8.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 20

Condition: used, machine/vehicle number: 008567, Max. panel width: 3800 mm Max. panel length: 3800 mm Main saw blade projection: 75 mm No of Grippers: 6 Gusdezvwi Espfx An Ijg

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Position 2: Single Edgebanders HOMAG-PROFI KAL330/7/A3/WZ Guodpfewuuf Rex An Iog Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Gedpszvwiljfx An Ieug Total number of drilling spindles: 10 Total number of tool changer positions: 16